자동차용 댐퍼 풀리 시장 규모는 2024년에 35억 1,000만 달러로 평가되었고 2026-2032년에 걸쳐 CAGR 4.71%를 나타내 2032년에는 50억 7,000만 달러에 달할 것으로 예측되고 있습니다.
댐퍼 풀리는 또한 에어컨, 교류 발전기, 펌프, 파워 스티어링 및 기타 시스템을 구동하는 액세서리 벨트를 구동하는 크랭크 샤프트의 앞쪽 끝에 장착 된 크랭크 샤프트 풀리라고도 합니다. 또한 엔진에서 발생하는 진동을 흡수하기 위해 사용됩니다.
세계의 자동차용 댐퍼 풀리 시장 정의
자동차용 댐퍼 풀리는 자동차용 크랭크 샤프트 풀리로 알려져 있으며 교류 발전기를 구동하는 액세서리 벨트를 구동합니다. 자동차용 댐퍼 풀리는 또한 디젤 엔진에 의해 생성되는 저주파 진동을 줄입니다.
또한, 시장의 유명한 진출기업은 전반적인 효율성을 높이기 위해 댐퍼 풀리 설계의 지속적인 기술 혁신에 집중하고 있습니다.
세계의 자동차용 댐퍼 풀리 시장 개요
엔진에 걸리는 스트레스가 증가하고 손상되는 자동차의 수가 증가하고 있기 때문에 크랭크샤프트에 걸리는 과부하를 관리하기 위해 댐퍼 풀리가 필요합니다. 제조업체는 효율적이고 높은 크랭크 샤프트 성능을 달성하기 위해 이러한 첨단 재료를 활용하는 데 중점을 둡니다.
현재 시나리오에서 자동차 산업은 몇 가지 개선을 보이고 있으며, 그것은 높은 작업 범위와 함께 어떤 방식으로 전력에 의해 실행되는 차량 수요를 높이기 위해 확인되었습니다. 그리고 엔진의 출력 밀도를 높이는 데 매우 초점을 맞추고 댐퍼 풀리 제조업체의 견인력을 뒷받침하고 있습니다.
OEM 자동차 제조업체는 여러 이동성 부문에 동시 투자가 필요하기 때문에 자본 측면에서 제약을 받을 수 있습니다. 연구 개발을 위한 이러한 투자로 인해 가격이 상승하고 이익률을 높이기 위해 하이 엔드 재료가 로우 엔드 재료로 대체되는 대체 효과가 있습니다.
Automotive Damper Pulley Market size was valued at USD 3.51 Billion in 2024 and is projected to reach USD 5.07 Billion by 2032, growing at a CAGR of 4.71% from 2026 to 2032.
The damper pulley is also called a crankshaft pulley that is mounted on the front end of the crankshaft driving the accessory belt that further drives the air conditioner, alternators, pumps, power steering, and other systems. It is used to transmit the mechanical power and torque which are additional car elements. They are also used to absorb the vibrations that are produced by engines. The Global Automotive Damper Pulley Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.
Global Automotive Damper Pulley Market Definition
The automotive damper pulley better known as the automotive crankshaft pulley drives accessory belts that in turn drive the alternator. Modern engines in the vehicles generate a large amount of torsional vibration in the crankshaft and the pulley filters absorb the vibrations. The automotive damper pulley also reduces low-frequency vibrations that are produced by diesel engines. The increasing demand from consumers for advanced automotive components are boosting the growth of the Automotive Damper Pulley Market.
Moreover, the prominent players in the market are concentrating on the continuous innovation in the damper pulley design to enhance the overall efficiency. Focusing on the innovations and development of advanced products are the major trends observed in the Automotive Damper Pulley Market, which is anticipated to boost the market growth during the forecast period.
Global Automotive Damper Pulley Market Overview
The inclining number of vehicles that sustain the damage because of increasing stress on the engine requires a damper pulley in order to manage overload on the crankshaft. Focusing on the innovations and developments of advanced products is a major trend observed in Automotive Damper Pulley Market. Manufacturers are keeping their focus on utilizing these advanced materials in order to achieve efficient and higher crankshaft performance. Over the recent few years, the automotive parts and accessories manufacturing industry has experienced a comprehensive remodeling, that is leading to the advent of a highly competitive global industry.
In the present scenario, the automotive industry has shown some improvements and that has been witnessed in raising the demand for vehicles that are run by some form of electric power along with a higher working range. This demand from the end-users has boosted the traction of damper pulley manufacturers to focus highly on increasing the engine power density, which can be provided with a high traveling range. Up surging the demand from the consumer end for much more advanced automotive components is driving the growth of the Automotive Damper Pulley Market.
OEM automobile manufacturers may be constrained with capital as a simultaneous investment is required across the multiple mobility verticals. Attributing to these investments for the research and development, there is an increase in the prices, and there is a replacement effect that is causing the high-end material to be replaced by the low-end materials in order to increase the profit margin, these factors are expected to hinder the growth of Automotive Damper Pulley Market.
The Global Automotive Damper Pulley Market is Segmented on the basis of Type, Application, and Geography.
Based on Type, the market is segmented into Metal-Based Automotive Damper Pulley, Nylon Based Automotive Damper Pulley and Other Automotive Damper Pulley. Among all the types the metal-based automotive damper is dominating the Automotive Damper Pulley Market growth during the forecasted period due to its high durability and capacity of absorbing the vibrations.
Based on Application, the market is segmented into Passenger Vehicle, Light Commercial Vehicle, and Heavy Commercial Vehicle. Among all the segments, the passenger vehicle segment is dominating the market growth during the forecasted period due to a large share of the passenger cars and commercial vehicles that are being equipped with advanced pulley technologies like lightweight damper pulley systems.
Based on Geography, the Global Automotive Damper Pulley Market is classified into four regions: North America, Europe, Asia Pacific, and the Rest of the World. The global market in the North American region is expected to increase the most compared to other regions during the projected period because North America has a high saturation for technologically advanced and high-cost products. A large share of the passenger cars and commercial vehicles are being equipped in the region with advanced pulley technologies like lightweight damper pulley systems. Furthermore, substantial sales of luxury and sports vehicles in the North American region have also made the market more tending toward the adoption of advanced technology based on automotive components.
The "Global Automotive Damper Pulley Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are BREDA LORETT SRL, Dayco, Fukoku Korea Co. Ltd., Gates Corporation, GT Automotive, JTEKT Corporation, Ningbo VET Energy Technology Co., Ltd, Sintercom India Ltd., Vibracoustic AG, and Zhejiang Dongxing Auto Parts Co., Ltd.
Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.