Verified Market Research의 애널리스트에 따르면, 자동 타이어 공기 주입 시스템 시장은 연비 효율성과 최적화된 타이어 관리에 대한 요구가 증가함에 따라 성장하고 있으며, 자동 타이어 공기 주입 시스템 시장은 2024년 약 9억 3,000만 달러에서 2032년에는 22억 1,000만 달러 규모에 달할 것으로 추정됩니다.
차량 안전성 향상과 비즈니스 차량의 다운타임 감소에 대한 수요가 자동 타이어 공기 주입 시스템 시장을 주도하고 있습니다. 이에 따라 시장은 2026-2032년까지 11.5%의 CAGR로 성장할 것으로 예상됩니다.
자동 타이어 공기 충전 시스템 시장 정의/개요
자동 타이어 공기 충전 시스템(ATIS)은 수동 개입 없이 자동으로 타이어의 공기 충전을 적절하게 유지하는 기술입니다. 대부분의 경우 자동차 타이어 시스템에 내장된 센서, 밸브, 공기 압축기로 구성됩니다. 센서가 타이어 공기 충전량을 모니터링하고, 미리 설정된 임계값 이하로 떨어지면 시스템이 압축기를 작동시켜 타이어에 필요한 공기 충전량까지 공기를 채웁니다. 공기 충전이 규정된 값을 초과하면, 시스템은 공기를 방출하여 과팽창을 방지합니다.
또한 ATIS는 상용 트럭, 군용 차량, 오프 하이웨이 장비 등 다양한 산업 분야에서 널리 사용되고 있으며, ATIS의 주요 목적은 타이어가 항상 최적의 공기 충전 상태를 유지하여 안전성을 높이고, 타이어의 수명을 연장하며, 연비를 개선하고, 차량 성능을 극대화하는 것입니다.
ATIS는 실시간으로 타이어의 공기압을 적정하게 유지하여 자동차의 연비를 크게 향상시킵니다. 적절한 타이어 공기 충전은 연료 소비에 직접적인 영향을 미치는 회전 저항을 줄이기 위해 매우 중요합니다. ATIS는 타이어의 공기압이 항상 적정하게 유지되도록 보장함으로써 연료 소비를 최소화하여 이산화탄소 배출량을 줄일 수 있습니다. 이러한 효율성은 기후변화에 대한 전 세계적인 관심과 지속가능한 대체 교통수단 모색을 고려할 때 특히 필수적입니다. 그 결과, 전 세계 정부와 기관들이 ATIS와 같은 친환경 기술을 채택하고 지원하는 경향이 증가하고 있습니다.
타이어의 공기압을 적절하게 유지하는 것은 자동차의 안전한 조종성과 안정성에 필수적입니다. 타이어의 공기압이 낮으면 제어력이 떨어지고, 정지 거리가 길어지며, 타이어가 터지는 등 타이어 트러블의 위험이 높아지는데, ATIS는 타이어의 공기압을 지속적으로 모니터링하고 조정하여 차량의 안전과 성능을 보장합니다. 이는 ATIS의 중요한 세일즈 포인트입니다. 자동차 소유자와 제조업체 모두에게 안전은 여전히 최우선 순위이며, 타이어의 상태와 차량 성능을 일관되게 관리할 수 있는 시스템에 대한 수요가 증가하고 있기 때문입니다.
ATIS는 타이어 수명을 연장하고 타이어 점검 및 유지보수의 필요성을 줄임으로써 이러한 비용을 절감하고 전반적인 차량 운영 효율을 향상시킬 수 있습니다. ATIS의 경제적 이점은 항상 수익성과 효율성을 높일 수 있는 방법을 찾고 있는 상용차 운영자에게 강력한 근거가 됩니다. 수익성과 효율성을 높일 수 있는 방법을 항상 찾고 있는 상용차 운영자들이 ATIS를 채택할 수 있는 강력한 근거가 되고 있습니다.
ATIS 시스템 구축 및 유지에 드는 높은 비용이 보급에 큰 걸림돌로 작용하고 있습니다. 특히 가격에 민감한 대규모 차량이나 개인 사용자에게는 ATIS 구매 및 설치 초기 비용이 많이 듭니다.
또한 ATIS는 타이어의 수명을 연장하고 연비를 개선하여 장기적인 유지보수 비용을 최소화하는 것을 목표로 하지만, 시스템 자체에는 정기적인 유지보수가 필요합니다. 잠재적 사용자에 따라서는 초기 비용과 반복 비용이 인식되는 이점보다 더 클 수 있으며, 특히 투자 대비 효과가 즉각적으로 나타나지 않을 수 있습니다.
ATIS는 차량의 기존 시스템과 통합해야 하는 복잡한 기술을 수반합니다. 이러한 복잡성은 특히 오래된 차량이나 원래 그러한 시스템을 지원하도록 제작되지 않은 모델에서 호환성 문제를 야기합니다. 이러한 차량에 ATIS를 장착하는 것은 어렵고, 종종 불가능한 경우도 있습니다.
또한, 시스템이 복잡하고 설치, 유지보수, 수리를 위한 전문가 교육이 필요하기 때문에 소규모 사업자나 자동차 서비스 인프라가 구축되지 않은 지역에서는 도입이 쉽지 않습니다.
The Automatic Tire Inflation System Market is growing due to the rising need for fuel efficiency and optimized tire care. According to the analyst from Verified Market Research, the Automatic Tire Inflation System Market is estimated to reach a valuation of USD 2.21 Billion over the forecast period 2032, subjugating around USD 0.93 Billion valued in 2024.
The demand for improved vehicle safety and reduced downtime in business fleets is driving the Automatic Tire Inflation System Market forward. It enables the market to grow at a CAGR of 11.5% from 2026-2032.
Automatic Tire Inflation System Market: Definition/ Overview
An automatic tire inflation system (ATIS) is a technology that automatically maintains proper tire pressure without requiring manual intervention. It is often made up of sensors, valves, and an air compressor integrated into a vehicle's tire system. The sensors monitor tire pressure, and if it falls below the preset threshold, the system triggers the compressor to inflate the tire to the desired pressure. When the pressure exceeds the specified limit, the system releases air to prevent overinflation.
Furthermore, ATIS is widely utilized in many industries, including commercial trucks, military vehicles, and off-road equipment. Its major goal is to increase safety, lengthen tire life, improve fuel efficiency, and maximize vehicle performance by ensuring tires are continually inflated at the optimum pressure, lowering the risk of blowouts, increasing traction, and reducing overall tire wear and tear.
ATIS assists in maintaining proper tire pressure in real-time, considerably increasing vehicle fuel efficiency. Proper tire inflation is critical for reducing rolling resistance, which directly affects fuel consumption. By ensuring that tires are constantly properly inflated, ATIS can minimize fuel consumption and thereby carbon emissions. This efficiency is especially essential in light of the growing worldwide concern about climate change and the quest for more sustainable transportation alternatives. As a result, governments and organizations around the world are more likely to adopt and support environmentally friendly technology such as ATIS.
Correct tire inflation is essential for safe vehicle handling and stability. Under-inflated tires can result in less control, longer stopping distances, and an increased risk of tire problems, such as blowouts. ATIS constantly monitors and adjusts tire pressure to ensure vehicle safety and performance. This is an important selling feature for ATIS, as safety is still a top priority for both vehicle owners and manufacturers, increasing demand for systems that can consistently manage tire health and vehicle performance.
Furthermore, tire-related concerns create downtime, raising operational costs. ATIS lowers these costs by extending tire life and lowering the need for human tire checkups and maintenance, improving fleet operational efficiency overall. The economic benefits of ATIS are a strong rationale for its adoption by commercial vehicle operators, who are constantly looking for methods to increase profitability and efficiency.
The high expense of establishing and maintaining ATIS systems is a significant obstacle to wider use. The initial cost of purchasing and installing ATIS is high, particularly for large fleets or individual users who are price-sensitive.
Also, while ATIS is intended to minimize long-term maintenance costs by extending tire life and boosting fuel efficiency, the system itself requires regular maintenance. For some potential users, the initial and recurring costs outweigh the perceived benefits, particularly if the return on investment is not immediately apparent.
ATIS involves complicated technology that must be integrated with a vehicle's existing systems. This intricacy causes compatibility concerns, especially in older vehicles or models that were not originally built to support such systems. Retrofitting ATIS into such vehicles is difficult and often impossible.
Furthermore, the system's complexity necessitates specialist training for installation, maintenance, and repair, which discourages adoption among smaller operators or in areas with less developed automotive service infrastructure.
According to VMR analysis, the central tire inflation system (CTIS) segment is estimated to hold the largest market share during the forecast period. CTIS enables drivers to alter tire pressure on the fly, responding to diverse terrains and situations, which is especially useful for vehicles operating in off-road, agricultural, military, and construction environments. This function improves vehicle performance by enhancing traction, minimizing soil compaction in agricultural applications, and boosting fuel efficiency.
CTIS' versatility and direct impact on performance and operational efficiency make it suitable for a wide range of applications, contributing to its market domination.
Furthermore, the central tire inflation system has gained popularity in commercial and military vehicles due to its significant advantages in terms of mobility, fuel efficiency, and tire life.
Commercial fleets stress efficiency and cost-cutting techniques, whereas military vehicles require greater mobility and adaptability in difficult terrains. The high demand in the diverse industries is boosting the CTIS market since these systems address important operational needs.
The ECU (Electronic Control Unit) segment is estimated to dominate the Automatic Tire Inflation System Market during the forecast period. The ATIS's brain is the ECU, which monitors tire pressure via sensors and decides when to inflate or deflate the tires to maintain appropriate pressure levels.
The ECU's pivotal role makes it vital to the ATIS's functionality, as it directly controls the system's operations based on real-time data. The need for precise and dependable control in guaranteeing vehicle safety and efficiency raises the ECU's status in the system, increasing its market share.
Furthermore, advances in microprocessor technology, software algorithms, and data analytics have had a substantial impact on ECUs. These developments have improved its ability to handle complicated datasets quickly and make precise tire pressure adjustments under different driving situations.
Also, current ECUs are designed to work smoothly with other vehicle components, such as telematics and vehicle management software, to provide a comprehensive approach to vehicle performance and maintenance. ECUs' rising sophistication and integration capabilities make them a focus point for innovation in the ATIS sector, contributing to their market dominance.
According to VMR Analyst, North America is estimated to dominate the Automatic Tire Inflation System Market during the forecast period. North America, particularly the United States, has a huge and well-developed road transportation sector. This sector relies largely on commercial vehicles, such as trucks and trailers, to move goods over long distances.
Automatic tire inflation systems are critical for maintaining proper tire pressure, lowering maintenance costs, and increasing fuel efficiency in these vehicles. The huge volume of commercial vehicle utilization in North America greatly increases the demand for ATIS.
Furthermore, North America is home to some of the world's finest automotive technology companies, as well as a strong research and development infrastructure. This environment promotes ATIS innovation, including improvements in system dependability, efficiency, and integration with other vehicle systems. The availability of a robust technological foundation and supportive infrastructure speeds up the development and deployment of ATIS.
Asia Pacific region is estimated to exhibit the highest growth of the automotive tire inflation system market during the forecast period. Asia Pacific is a key automobile manufacturing region, with China, India, Japan, and South Korea leading the way in both new vehicle production and acceptance. The burgeoning automotive sector in these countries, driven by rising population and economic levels, increases demand for advanced vehicle technology such as ATIS.
As more people and organizations in the region invest in cars, particularly commercial and off-road vehicles, the need for ATIS to improve fuel efficiency, safety, and vehicle performance grows.
Furthermore, the Asia Pacific region is rapidly developing its road infrastructure and logistics industry to enable economic growth and regional integration. This development necessitates a big fleet of commercial vehicles for transporting commodities throughout the region.
As these trucks routinely travel long distances, there is an increasing demand for technology such as ATIS that can lower maintenance costs, increase vehicle uptime, and improve fuel efficiency. The expansion of the region's road infrastructure and logistics industry serves as a driver for ATIS adoption.
The competitive landscape of the automatic tire inflation system (ATIS) market is defined by a constant interplay of technology breakthroughs, regulatory frameworks, and changing client needs. Also, the competitive landscape is driven by issues such as government legislation requiring the installation of tire pressure monitoring systems (TPMS) in vehicles, which increases competition among ATIS suppliers to produce compliant and efficient solutions.
Some of the prominent players operating in the Automatic Tire Inflation System Market include:
Aperia Technologies Inc., Bridgestone Corporation, Continental AG, Dana Limited, Goodyear Tire & Rubber Company, Hendrickson USA, Meritor, Michelin, Parker Hannifin Corp, SAF-Holland S.A., WABCO, Rotex Automation, STEMCO Products Inc., Haltec Corporation, TI Fluid Systems, IDEX Corporation, Airgo Systems, VIGIA, Trans Technologies Company, PSI.
In April 2021, Danfoss Editron created waves when it announced a partnership with Meritor Inc. and Electra Commercial Vehicles to expand its product portfolio.
In March 2019, Dana Incorporated formed a strategic agreement with Hyliion Inc., a Class 8 electrification firm, to strengthen its market position and strive toward sustainability.