한글목차

자동차 촉매 컨버터 세계 시장의 미래는 백금, 팔라듐, 로듐 시장에 기회가 있고 유망합니다. 세계 자동차 촉매 컨버터 시장은 2025년부터 2031년까지 연평균 8.9%의 성장률을 보일 것으로 예상됩니다. 이 시장의 주요 촉진요인은 신흥국의 자동차 제조 확대, 자동차에 대한 운전자의 인식 증가, 자동차 가입 증가입니다.

• Lucintel의 예측에 따르면, 제품별로는 삼원 산화 환원 부문이 예측 기간 동안 가장 큰 부문으로 남을 것으로 보입니다.
• 재료별로는 팔라듐이 예측 기간 동안 가장 큰 비중을 차지할 것으로 보입니다.
• 지역별로 보면 유럽은 고급 자동차 제조업체에 대한 소비자의 선호도가 높아지고, 유럽에 주요 제조업체가 존재하기 때문에 예측 기간 동안 가장 큰 지역으로 남을 것으로 보입니다.

자동차 촉매 컨버터 시장의 전략적 성장 기회

자동차 촉매 컨버터 시장의 전략적 성장 기회를 살펴보면, 확장 및 혁신의 잠재력이 큰 몇 가지 분야가 드러납니다.

• 전기자동차 촉매에 대한 투자 : 전기자동차 전용으로 설계된 촉매 컨버터에 대한 투자가 성장의 기회가 될 것입니다. 이 분야는 전기자동차의 보급이 확대됨에 따라 특수 배출가스 제어 솔루션에 대한 수요를 촉진하고 있습니다.
• 첨단 소재 개발 : 촉매 컨버터용 고성능 신소재 개발에 집중하는 것은 성장 잠재력을 제공합니다. 이러한 소재는 효율성, 내구성 및 전반적인 성능을 향상시킬 수 있으며, 다양한 자동차 애플리케이션에 적용될 수 있습니다.
• 재활용 프로그램 확대 : 촉매 컨버터 재활용 프로그램의 확대는 시장 성장을 촉진할 수 있습니다. 재활용 기술과 공정의 개선은 지속가능성 목표를 지원하고 귀중한 금속을 회수함으로써 경제적 이익을 가져다 줄 수 있습니다.
• 스마트 기술 통합 : 센서 및 진단 도구와 같은 스마트 기술을 촉매 컨버터에 통합하는 것은 성장 기회를 제공합니다. 이러한 기술은 모니터링, 유지보수 및 전반적인 성능을 향상시킬 수 있습니다.
• 세계 배출 기준의 채택 : 세계 배출가스 기준을 준수함으로써 새로운 시장과 기회를 개척할 수 있습니다. 국제 규제를 채택함으로써 제조업체는 사업 범위를 확장하고 세계 시장의 다양한 요구에 대응할 수 있습니다.

이러한 성장 기회는 기술 혁신을 촉진하고, 지속가능성을 높이고, 시장 잠재력을 확대함으로써 자동차 촉매 컨버터 시장을 형성하고 있습니다.

자동차 촉매 컨버터 시장의 촉진요인 및 과제

자동차 촉매 컨버터 시장은 성장과 개척에 영향을 미치는 다양한 촉진요인과 과제에 의해 영향을 받습니다. 기술 발전, 규제 압력, 시장 역학은 자동차 촉매 컨버터 시장의 주요 촉진요인 및 과제이며, 성장 궤도를 형성하고 업계 관행에 영향을 미치고 있습니다.

자동차 촉매 컨버터 시장을 이끄는 요인은 다음과 같습니다:

• 기술 발전 : 촉매 컨버터 기술의 혁신이 시장 성장의 원동력이 되고 있습니다. 재료 강화, 설계 개선, 신기술은 성능 향상과 배출가스 규제 준수에 기여하고 있습니다.
• 배기가스 규제 강화 : 배기가스 규제 강화로 인해 제조업체는 보다 효율적인 촉매 컨버터를 개발해야 합니다. 이러한 규제는 규제 요건을 충족하는 고급 제품에 대한 수요를 증가시키고 있습니다.
• 전기자동차의 보급 확대 : 전기자동차의 보급 확대는 특수 촉매 컨버터에 새로운 기회를 창출하고 있습니다. 이러한 변화는 시장을 확대하고 배출가스 제어 기술의 혁신을 촉진할 것입니다.
• 지속가능성 중시 : 지속가능성과 환경에 미치는 영향에 대한 관심이 높아지고 있습니다. 배출가스를 줄이고 재활용 공정을 개선하려는 노력은 시장 성장을 촉진하고 환경 친화적인 관행을 뒷받침하고 있습니다.
• 성능에 대한 소비자의 요구 : 소비자들은 더 나은 배기가스 규제를 포함하여 자동차에 더 높은 성능을 요구하고 있습니다. 이러한 수요는 자동차의 효율을 높이고 환경에 미치는 영향을 줄이는 첨단 촉매 컨버터 개발을 촉진하고 있습니다.

자동차 촉매 컨버터 시장의 과제는 다음과 같습니다:

• 첨단 재료의 높은 비용 : 촉매 컨버터에 사용되는 고성능 재료의 비용이 장벽이 될 수 있습니다. 이러한 재료는 종종 고가이며, 촉매 컨버터의 전체 비용과 경제성에 영향을 미칩니다.
• 규제 준수의 복잡성 : 복잡하고 다양한 규제 요건을 이해하는 것은 어려운 일입니다. 지역마다 다른 표준을 준수하는 것은 비용을 증가시키고 제조 공정을 복잡하게 만들 수 있습니다.
• 시장 포화 : 촉매 컨버터 시장 경쟁이 심화되고 있습니다. 시장 포화는 수익성에 영향을 미치며, 제조업체는 기술 혁신과 품질로 제품을 차별화해야 합니다.

목차

제1장 주요 요약

제2장 세계의 자동차 촉매 컨버터 시장 : 시장 역학

• 소개, 배경, 분류
• 공급망
• 업계 성장 촉진요인과 과제

제3장 시장 동향과 예측 분석(2019-2031년)

• 거시경제 동향(2019-2024년)과 예측(2025-2031년)
• 세계의 자동차 촉매 컨버터 시장 동향(2019-2024년)과 예측(2025-2031년)
• 세계의 자동차 촉매 컨버터 시장 : 제품별
  • 양방향 산화
  • 삼원 산화 환원
  • 디젤 산화 촉매
• 세계의 자동차 촉매 컨버터 시장 : 재료별
  • 백금
  • 팔라듐
  • 로듐

제4장 지역별 시장 동향과 예측 분석(2019-2031년)

• 세계의 자동차 촉매 컨버터 시장 : 지역별
• 북미의 자동차 촉매 컨버터 시장
• 유럽의 자동차 촉매 컨버터 시장
• 아시아태평양의 자동차 촉매 컨버터 시장
• 기타 지역의 자동차 촉매 컨버터 시장

제5장 경쟁 분석

• 제품 포트폴리오 분석
• 운영 통합
• Porter's Five Forces 분석

제6장 성장 기회와 전략 분석

• 성장 기회 분석
  • 세계의 자동차 촉매 컨버터 시장 성장 기회 : 제품별
  • 세계의 자동차 촉매 컨버터 시장 성장 기회 : 재료별
  • 세계의 자동차 촉매 컨버터 시장 성장 기회 : 지역별
• 세계의 자동차 촉매 컨버터 시장 최신 동향
• 전략적 분석
  • 신제품 개발
  • 세계의 자동차 촉매 컨버터 시장 생산능력 확대
  • 세계의 자동차 촉매 컨버터 시장 기업 인수합병(M&A), 합작투자
  • 인증과 라이선싱

제7장 주요 기업 개요

• BASF
• BENTELER International Aktiengesellschaft
• BM Catalysts Limited
• BOSAL
• Marelli Corporation
• Calsonic Kansei
• Deccats
• Eberspacher
• European Exhaust & Catalyst
• FORVIA Faurecia

영문목차

The future of the global automotive catalytic converter market looks promising with opportunities in the platinum, palladium, and rhodium markets. The global automotive catalytic converter market is expected to grow with a CAGR of 8.9% from 2025 to 2031. The major drivers for this market are growing car manufacturing in emerging economies, rising awareness among drivers of motor vehicles, and an increase in subscriptions to cars.

• Lucintel forecasts that, within the product category, the three-way oxidation-reduction segment will remain the largest segment over the forecast period.
• Within the material category, palladium will remain the largest segment over the forecast period.
• In terms of region, Europe will remain the largest region over the forecast period due to growing consumer preference for luxury automakers and the presence of major players in the region.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Automotive Catalytic Converter Market

The automotive catalytic converter market is experiencing several emerging trends that are shaping its future.

• Shift towards Electric Vehicle Catalysts: The rise of electric vehicles (EVs) is driving the development of specialized catalytic converters. These converters are designed to meet the unique needs of EVs and support their lower emissions profiles.
• Enhanced Materials and Technologies: There is a growing focus on developing new materials and technologies for catalytic converters. Advanced materials, such as high-performance alloys and new catalyst formulations, are being introduced to improve efficiency and longevity.
• Increased Recycling and Reuse: The market is seeing an increased emphasis on recycling and reusing catalytic converters. Innovations in recovery technologies and improved recycling processes are helping reduce waste and recover valuable metals.
• Regulatory Pressure for Emissions Reduction: Stricter emissions regulations are driving the demand for more effective catalytic converters. Manufacturers are focusing on developing products that meet or exceed these regulations, ensuring compliance and reducing environmental impact.
• Integration of Advanced Manufacturing Techniques: The adoption of advanced manufacturing techniques, such as 3D printing and automation, is enhancing the production of catalytic converters. These technologies improve precision, reduce costs, and enable the creation of complex designs.

These trends are reshaping the automotive catalytic converter market by driving innovation, improving sustainability, and aligning with evolving regulatory requirements.

Recent Developments in the Automotive Catalytic Converter Market

Recent developments in the automotive catalytic converter market highlight significant advancements and shifts in technology and regulations.

• Advancement in Platinum-Based Catalysts: Innovations in platinum-based catalysts are improving efficiency and performance. These developments are addressing the need for better emissions control and enhancing the overall effectiveness of catalytic converters.
• Expansion of Electric Vehicle Catalysts: The introduction of specialized catalytic converters for electric vehicles is gaining traction. These converters are designed to support the unique emissions profiles of EVs and contribute to cleaner transportation solutions.
• Enhancement of Recycling Technologies: New technologies for recycling catalytic converters are being implemented. These advancements are improving the recovery of valuable metals and reducing the environmental impact of waste products.
• Development of High-Durability Materials: Advances in materials science are leading to the creation of more durable catalytic converters. These materials improve the longevity and performance of converters, addressing issues related to wear and tear.
• Implementation of Stricter Emissions Standards: The adoption of more stringent emissions standards is driving market growth. Manufacturers are developing catalytic converters that meet these new regulations, ensuring compliance and contributing to reduced pollution.

These developments are impacting the automotive catalytic converter market by enhancing performance, improving sustainability, and responding to regulatory pressures.

Strategic Growth Opportunities for Automotive Catalytic Converter Market

Exploring strategic growth opportunities in the automotive catalytic converter market reveals several areas with significant potential for expansion and innovation.

• Investment in Electric Vehicle Catalysts: Investing in catalytic converters designed specifically for electric vehicles presents a growth opportunity. This sector is expanding as the adoption of EVs increases, driving demand for specialized emissions control solutions.
• Development of Advanced Materials: Focusing on the development of new and high-performance materials for catalytic converters offers growth potential. These materials can enhance efficiency, durability, and overall performance, appealing to a broad range of automotive applications.
• Expansion of Recycling Programs: Expanding recycling programs for catalytic converters can drive market growth. Improved recycling technologies and processes support sustainability goals and offer economic benefits by recovering valuable metals.
• Integration of Smart Technologies: Incorporating smart technologies into catalytic converters, such as sensors and diagnostic tools, presents growth opportunities. These technologies can improve monitoring, maintenance, and overall performance.
• Adoption of Global Emissions Standards: Aligning with global emissions standards can open up new markets and opportunities. Adopting international regulations helps manufacturers expand their reach and meet the diverse needs of global markets.

These growth opportunities are shaping the automotive catalytic converter market by driving innovation, enhancing sustainability, and expanding market potential.

Automotive Catalytic Converter Market Driver and Challenges

The automotive catalytic converter market is influenced by various drivers and challenges that impact its growth and development. Technological advancements, regulatory pressures, and market dynamics are key drivers and challenges in the automotive catalytic converter market, shaping its growth trajectory and influencing industry practices.

The factors responsible for driving the automotive catalytic converter market include:

• Technological Advancements: Innovations in catalytic converter technology are driving market growth. Enhanced materials, improved designs, and new technologies contribute to better performance and compliance with emissions standards.
• Stricter Emissions Regulations: Increasingly stringent emissions regulations are pushing manufacturers to develop more efficient catalytic converters. These regulations drive demand for advanced products that meet regulatory requirements.
• Rising Adoption of Electric Vehicles: The growing adoption of electric vehicles is creating new opportunities for specialized catalytic converters. This shift is expanding the market and driving innovation in emissions control technologies.
• Focus on Sustainability: There is a strong focus on sustainability and environmental impact. Efforts to reduce emissions and improve recycling processes are driving market growth and supporting eco-friendly practices.
• Consumer Demand for Performance: Consumers are demanding higher performance from their vehicles, including better emissions control. This demand drives the development of advanced catalytic converters that enhance vehicle efficiency and reduce environmental impact.

Challenges in the automotive catalytic converter market are:

• High Cost of Advanced Materials: The cost of high-performance materials used in catalytic converters can be a barrier. These materials are often expensive, impacting the overall cost and affordability of catalytic converters.
• Regulatory Compliance Complexity: Navigating complex and varying regulatory requirements can be challenging. Compliance with different standards across regions can increase costs and complicate manufacturing processes.
• Market Saturation: The market for catalytic converters is becoming increasingly competitive. Saturation can impact profitability and require manufacturers to differentiate their products through innovation and quality.

The drivers and challenges in the automotive catalytic converter market are shaping its growth and development. Addressing these factors is crucial for advancing technology, meeting regulatory requirements, and achieving market success.

List of Automotive Catalytic Converter Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies automotive catalytic converter companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the automotive catalytic converter companies profiled in this report include-

• BASF
• BENTELER International Aktiengesellschaft
• BM Catalysts Limited
• BOSAL
• Marelli Corporation
• Calsonic Kansei
• Deccats
• Eberspacher
• European Exhaust & Catalyst
• FORVIA Faurecia

Automotive Catalytic Converter by Segment

The study includes a forecast for the global automotive catalytic converter market by product, material, and region.

Automotive Catalytic Converter Market by Product [Analysis by Value from 2019 to 2031]:

• Two-Way Oxidation
• Three-Way Oxidation-Reduction
• Diesel Oxidation Catalyst

Automotive Catalytic Converter Market by Material [Analysis by Value from 2019 to 2031]:

• Platinum
• Palladium
• Rhodium

Automotive Catalytic Converter Market by Region [Analysis by Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Automotive Catalytic Converter Market

Major players in the market are expanding their operations and forming strategic partnerships to strengthen their positions. The below image highlights recent developments by major automotive catalytic converter producers in key regions: the USA, China, India, Japan, and Germany.

• United States: In the U.S., advancements include the development of high-performance catalytic converters with improved efficiency and durability. The market is also seeing increased adoption of electric vehicle (EV) catalytic converters and the implementation of stricter emissions standards by the Environmental Protection Agency (EPA).
• China: China is leading the way with innovations in catalytic converter technology, including enhanced materials and designs to meet stringent emissions regulations. The country is also focusing on improving the recyclability of catalytic converters and expanding the adoption of hybrid and electric vehicles.
• Germany: Germany is at the forefront of integrating advanced catalytic converter technologies as part of its stringent emissions control measures. The market is seeing significant investments in research and development for platinum-based catalysts and the incorporation of new materials to enhance performance.
• India: In India, recent developments include the adoption of more efficient catalytic converters in response to stricter environmental regulations. The market is also witnessing a growing focus on affordability and durability to cater to the needs of a diverse consumer base.
• Japan: Japan is advancing with the introduction of catalytic converters designed for next-generation vehicles, including hybrids and electric models. The market is also focusing on enhancing the efficiency of catalytic converters and reducing the environmental impact of automotive emissions.

Features of the Global Automotive Catalytic Converter Market

Market Size Estimates: Automotive catalytic converter market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.

Segmentation Analysis: Automotive catalytic converter market size by product, material, and region in terms of value ($B).

Regional Analysis: Automotive catalytic converter market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different products, materials, and regions for the automotive catalytic converter market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the automotive catalytic converter market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the automotive catalytic converter market by product (two-way oxidation, three-way oxidation-reduction, and diesel oxidation catalyst), material (platinum, palladium, and rhodium), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Automotive Catalytic Converter Market: Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2019 to 2031

• 3.1. Macroeconomic Trends (2019-2024) and Forecast (2025-2031)
• 3.2. Global Automotive Catalytic Converter Market Trends (2019-2024) and Forecast (2025-2031)
• 3.3: Global Automotive Catalytic Converter Market by Product
  • 3.3.1: Two-Way Oxidation
  • 3.3.2: Three-Way Oxidation-Reduction
  • 3.3.3: Diesel Oxidation Catalyst
• 3.4: Global Automotive Catalytic Converter Market by Material
  • 3.4.1: Platinum
  • 3.4.2: Palladium
  • 3.4.3: Rhodium

4. Market Trends and Forecast Analysis by Region from 2019 to 2031

• 4.1: Global Automotive Catalytic Converter Market by Region
• 4.2: North American Automotive Catalytic Converter Market
  • 4.2.1: North American Automotive Catalytic Converter Market by Product: Two-Way Oxidation, Three-Way Oxidation-Reduction, and Diesel Oxidation Catalyst
  • 4.2.2: North American Automotive Catalytic Converter Market by Material: Platinum, Palladium, and Rhodium
• 4.3: European Automotive Catalytic Converter Market
  • 4.3.1: European Automotive Catalytic Converter Market by Product: Two-Way Oxidation, Three-Way Oxidation-Reduction, and Diesel Oxidation Catalyst
  • 4.3.2: European Automotive Catalytic Converter Market by Material: Platinum, Palladium, and Rhodium
• 4.4: APAC Automotive Catalytic Converter Market
  • 4.4.1: APAC Automotive Catalytic Converter Market by Product: Two-Way Oxidation, Three-Way Oxidation-Reduction, and Diesel Oxidation Catalyst
  • 4.4.2: APAC Automotive Catalytic Converter Market by Material: Platinum, Palladium, and Rhodium
• 4.5: ROW Automotive Catalytic Converter Market
  • 4.5.1: ROW Automotive Catalytic Converter Market by Product: Two-Way Oxidation, Three-Way Oxidation-Reduction, and Diesel Oxidation Catalyst
  • 4.5.2: ROW Automotive Catalytic Converter Market by Material: Platinum, Palladium, and Rhodium

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Automotive Catalytic Converter Market by Product
  • 6.1.2: Growth Opportunities for the Global Automotive Catalytic Converter Market by Material
  • 6.1.3: Growth Opportunities for the Global Automotive Catalytic Converter Market by Region
• 6.2: Emerging Trends in the Global Automotive Catalytic Converter Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Automotive Catalytic Converter Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Automotive Catalytic Converter Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: BASF
• 7.2: BENTELER International Aktiengesellschaft
• 7.3: BM Catalysts Limited
• 7.4: BOSAL
• 7.5: Marelli Corporation
• 7.6: Calsonic Kansei
• 7.7: Deccats
• 7.8: Eberspacher
• 7.9: European Exhaust & Catalyst
• 7.10: FORVIA Faurecia