한글목차

브러시드 직류(DC) 모터의 동향과 예측

세계 브러시드 직류(DC) 모터 시장의 미래는 주거용, 상업용, 산업용 및 자동차 용도에서 기회가 유망합니다. 세계 브러시드 직류(DC) 모터 시장은 2024-2030년 7.6%의 연평균 복합 성장률(CAGR)로 2030년까지 약 201억 달러에 달할 것으로 예상됩니다. 이 시장의 주요 촉진요인은 자동차에서 이러한 모터의 적용 증가, 제조 장비에서 로봇 공학의 채택 증가, 출력 밀도 기반 모터에 대한 수요 증가입니다.

• Lucintel의 예측에 따르면 유형별로는 션트윈드 브러시 DC 모터가 우수한 신뢰성, 설계 및 제조 유연성, 긴 수명, 다양한 용도에서의 사용 편의성 등 다양한 장점으로 인해 예측 기간 중 가장 높은 성장을 보일 것으로 예상됩니다.
• 용도별로는 파워 윈도우, 파워 시트, 팬 등 자동화 시스템에서 DC 모터가 많이 사용되므로 자동차가 가장 큰 부문으로 남을 것으로 보입니다.
• 지역별로 보면 APAC는 주요 제조 거점이 존재하고, 승용차 수요가 많으며, 도시화가 빠르게 진행되고 있으며, 예측 기간 중 가장 높은 성장세를 보일 것으로 예상됩니다.

브러시 직류(DC) 모터 시장에서의 전략적 성장 기회

브러시 직류 모터 시장의 여러 용도에는 다양한 전략적 성장 기회가 존재합니다.

• 자동차 산업: 자동차 산업은 브러시리스 DC 모터가 큰 잠재력을 가진 분야 중 하나로, 전기자동차 및 첨단운전자보조시스템(ADAS)에서 성능 향상과 기능 개선으로 이어질 수 있습니다.
• 가전제품: 가전제품 및 개인용 가젯과 같은 소비자 전자제품은 작고 효율적인 브러시리스 DC 모터에 대한 수요가 있으며, 기술 혁신과 시장 확대의 여지가 있습니다.
• 산업 자동화 : 로봇 공학 및 자동 생산 시스템에서 사용되는 것으로 대표되는 산업 자동화가 성장함에 따라 브러시리스 DC 모터를 사용하면 기계의 성능을 향상시킬 수 있습니다.
• 의료기기: BLDC(브러시리스 직류) 모터는 고신뢰성과 정밀한 모터 솔루션이 필요하므로 진단 및 치료 장비를 포함한 의료기기에 사용됩니다.
• 재생에너지: 스마트 풍력발전기는 재생 에너지를 생산하기 위해 주택에 설치되는 소형 풍력 터빈에 매우 유용합니다. 또한 효율을 높이는 태양열 추적기를 사용하여 지속가능한 에너지 솔루션의 기회를 제공하고 이 분야의 급속한 발전에 기여하고 있습니다.

이러한 기회는 브러시리스 직류 모터 시장의 성장과 기술 혁신을 촉진하고 투자 및 시장 개발 전략에 영향을 미치고 있습니다.

브러시형 직류(DC) 모터 시장 성장 촉진요인 및 과제

브러시 DC 모터 시장은 성장과 채택에 영향을 미치는 다양한 촉진요인 및 과제에 의해 형성되고 있습니다.

솔질된 직류(DC) 모터 시장을 주도하는 요인은 다음과 같습니다. :

• 기술 혁신 : 기술 혁신 : 모터 설계 및 재료의 발전으로 브러시 DC 모터의 성능과 신뢰성이 향상되어 다양한 용도로의 채택을 촉진하고 시장 성장을 가속할 수 있습니다.
• 자동화 수요 증가: 현대에는 자동화가 보편화되어 있습니다. 따라서 신뢰성이 필수적인 자동화 시스템에서 정밀하게 작동하기 위해 브러시리스 DC 모터가 사용되므로 수요가 증가하고 있습니다.
• 전기자동차의 성장: 전기자동차의 인기가 높아짐에 따라 브러시드 DC 모터의 사용이 필요하며, 특히 소형 또는 보조 용도에 사용되어 시장 확장을 유발하고 있습니다.
• 가전 붐: 가전제품의 성장 추세에 따라 소형, 고효율 브러시 DC 모터에 대한 수요가 증가하여 기술 혁신과 시장 확대를 지원하고 있습니다.
• 저렴한 가격: 브러시드 직류(DC) 모터는 다른 유형의 엔진에 비해 가격이 저렴하므로 다양한 산업에서 사용되고 있으며, 이는 시장 확대로 이어지고 있습니다.

브러시 직류(DC) 모터 시장이 해결해야 할 과제는 다음과 같습니다. :

• 브러시리스 모터와의 경쟁도 그 중 하나입니다. 브러시리스 직류 모터는 브러시 직류 모터에 비해 효율이 향상되고 수명이 길기 때문에 시장 점유율이 감소하고 성장이 둔화될 것입니다.
• 정비 필요성 : 브러시 DC 모터의 정비는 브러시 마모로 인해 정기적 인주의가 필요합니다.
• 기술적 한계: 그럼에도 불구하고 브러시 DC 모터는 최신 모터 기술과 달리 효율과 성능에 대한 제약이 있으며, 특정 시장에서의 경쟁력에 큰 영향을 미치고 있습니다.

상기의 촉진요인과 촉진요인은 기술 동향과 시장 세력의 변화 속에서 브러시리스 DC 모터 시장의 성장과 개척을 형성하고 있습니다.

목차

제1장 개요

제2장 세계의 브러시드 직류(DC) 모터 시장 : 시장 역학

• 서론, 배경, 분류
• 공급망
• 업계의 촉진요인과 과제

제3장 2018-2030년 시장 동향과 예측 분석

• 거시경제 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 브러시드 직류(DC) 모터 시장 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 브러시드 직류(DC) 모터 시장 : 유형별
  • 직파 브러시 DC 모터
  • 영구자석 브러시 DC 모터
  • 션트권 브러시 DC 모터
  • 복합권 브러시 DC 모터
• 세계의 브러시드 직류(DC) 모터 시장 : 전압별
  • 75kV 미만
  • 75kV-375kV
  • 375kV 이상
• 세계의 브러시드 직류(DC) 모터 시장 : 용도별
  • 주택
  • 커머셜
  • 산업
  • 자동차

제4장 2018-2030년 지역별 시장 동향과 예측 분석

• 지역별 세계의 브러시드 직류(DC) 모터 시장
• 북미의 브러시드 직류(DC) 모터 시장
• 유럽의 브러시드 직류(DC) 모터 시장
• 아시아태평양 브러시드 직류(DC) 모터 시장
• 기타 지역 브러시드 직류(DC) 모터 시장

제5장 경쟁 분석

• 제품 포트폴리오 분석
• 운영 통합
• Porter's Five Forces 분석

제6장 성장 기회와 전략 분석

• 성장 기회 분석
  • 세계의 브러시드 직류(DC) 모터 시장의 유형별 성장 기회
  • 전압별 세계의 브러시드 직류(DC) 모터 시장의 성장 기회
  • 애플리케이션별 세계의 브러시드 직류(DC) 모터 시장의 성장 기회
  • 세계의 브러시드 직류(DC) 모터 시장 지역의 성장 기회
• 세계의 브러시드 직류(DC) 모터 시장의 새로운 동향
• 전략 분석
  • 신제품 개발
  • 세계의 브러시드 직류(DC) 모터 시장의 생산능력 확대
  • 세계의 브러시드 직류(DC) 모터 시장에서의 합병, 인수, 합병사업
  • 인증과 라이선싱

제7장 주요 기업의 기업 개요

• Nidec Motor
• Ningbo Volcanic Electric
• Electromate
• AMETEK
• Johnson Electric
• Siemens
• Toshiba
• GE Industrial Motors

영문목차

Brushed Direct Current (DC) Motor Trends and Forecast

The future of the global brushed direct current (DC) motor market looks promising with opportunities in the residential, commercial, industrial, and automotive applications. The global brushed direct current (DC) motor market is expected to reach an estimated $20.1 billion by 2030 with a CAGR of 7.6% from 2024 to 2030. The major drivers for this market are the rising application of these motors in vehicles, the growing adoption of robotics in manufacturing units, and the increasing demand for enhanced power density-based motors.

• Lucintel forecast that, within the type category, shunt-wound brush DC motors are expected to witness the highest growth over the forecast period due to their various advantages, such as excellent dependability, flexibility in design and manufacture, long lifespan, and ease of use in various applications.
• Within the application category, automotive will remain the largest segment due to the significant use of DC motors in its automation systems, which include power windows, power seats, and fans.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period due to the existence of major manufacturing hubs, significant demand for passenger vehicles, and rapid urbanization in the region.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Brushed Direct Current (DC) Motor Market

The landscape of the brushed DC motor market is being changed by several emerging trends.

• Advances in Technology: Innovations in brush and commutator materials are improving the durability and efficiency of the brushed DC motors, prolonging their life spans, and improving their performances for use in different applications.
• Shrinking: The trend to make brushed DC motors smaller is propelled by consumer electronics and medical devices that require compact and lightweight solutions for better usability within constrained spaces.
• Automation Integration: Increasingly, brushed DC motors are becoming part of manufacturing automation systems enhancing accuracy as well as control which makes them indispensable tools for advanced industrial applications.
• Energy Efficiency Focus: There has been an increasing focus on energy-efficient designs of the brushed DC motors to reduce operational costs while conforming to environmental regulations, leading to motor design and technological advancements.
• Rising Electric Vehicles: This growth in electric vehicle (EV) markets is supporting demand for brushed DC motors, especially for smaller EV applications or auxiliary functions thereby influencing design and production trends.

These innovative trends are transforming the future direction of the brushed DC motor market by affecting both technological advances and market forces.

Recent Developments in the Brushed Direct Current (DC) Motor Market

Recent developments in the brushed DC motor market reveal profound changes in technology and markets.

• Better Brush Materials: Carbon composites and other improvements to brush materials are expanding the lifespan and performance of brushed DC motors, reducing wear and tear as well as maintenance needs.
• Incorporation in the Automotive Sector: Many brushed DC motors are currently being included in various automotive applications such as electric windows and seating arrangements that enhance the performance of the vehicle and increase comfort for users.
• Smart Motor Technology: There is an emergence of smart brushed DC motors incorporating embedded sensors and controllers which enhance their monitoring capability thereby improving overall system efficiency.
• Increased Production Capacity: Growing global demand for Brushed DC Motors has led to expansion of manufacturing facilities particularly in Asia, thus enabling more cost-competitive prices and availability.
• Advancements in Efficiency: Novel designs and technologies that improve energy efficiency have made brushed DC motors more adaptable for use with less power usage or better-performing systems.

This will shape the course of action taken by the Brushed DC Motor industry towards new technological advancements while expanding into different sectors.

Strategic Growth Opportunities for Brushed Direct Current (DC) Motor Market

There are diverse strategic growth opportunities that exist in several applications of brushed DC motor markets.

• Automotive: The automotive industry is one area where brushed DC motors have enormous potential, more so in electric vehicles and advanced driver assistance systems leading to improved performance and increased functionality.
• Consumer Electronics: This creates room for innovation and market expansion since there is a demand for compact and efficient brushed DC motors in consumer electronics like home appliances and personal gadgets.
• Industrial Automation: It is possible to improve machine performance through using brushed DC motors when industrial automation grows as exemplified by their use in robotics and automated production systems.
• Medical Devices: That need precise motor solutions with high reliability have driven the use of BLDC (brushless direct current) motors in medical devices including diagnostic or therapeutic equipment.
• Renewable Energy: Smart Wind power generators are very useful to small wind turbines installed at houses to produce renewable energy. They also present an opportunity for sustainable energy solutions by utilizing solar trackers which increase their efficiency, thereby contributing to rapid advancements within these areas.

These opportunities are driving growth and innovation in the brushed DC motor market, influencing investment and development strategies.

Brushed Direct Current (DC) Motor Market Driver and Challenges

The brushed DC motor market is shaped by a variety of drivers and challenges that influence its growth and adoption.

The factors responsible for driving the brushed direct current (DC) motor market include:

• Technological Breakthrough: Advanced in motor design and materials improve the performance as well as reliability of brushed DC motors thus propelling their adoption into various applications hence driving the market to grow.
• Increased Demand for Automation: In this modern age, automation has become widespread. Therefore, there is an increased demand for brushed DC motors because they are used to operate with precision in automated systems where reliability is a must-have.
• Growth in Electric Vehicles: The growing popularity of electric vehicles necessitates the use of brushed DC motors, especially for smaller or auxiliary applications thereby causing the market to expand.
• Consumer Electronics Boom: A rising trend in consumer electronics demands compact and efficient brushed DC motors hence supporting innovations and enlarging markets.
• Affordability: Due to their low prices relative to other types of engines, brushed direct current (DC) motors are preferred over them; thus, helping their increased application across diverse industries as well as leading to market expansion.

Challenges in the brushed direct current (DC) motor market are:

• Competition from brushless motors is one such obstacle. Brushless DC motors offer improved efficiency and longer lifespan compared to brushed DC motors thereby eating into their market share hence slowing down its growth prospects.
• Maintenance Requirements: The maintenance of Brushed DC motors requires regular attention due to brush wear that may escalate operation costs and reduce their attractiveness in some instances.
• Technological Limitations: Nonetheless, brushed DC motors have their constraints when it comes to efficiency and performance unlike the latest motor technologies which greatly affect their competitiveness in certain markets.

The above drivers and challenges are shaping the growth and development of the brushed DC motor market amidst changing technological trends and market forces.

List of Brushed Direct Current (DC) Motor Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies brushed direct current (DC) motor companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the brushed direct current (DC) motor companies profiled in this report include-

• Nidec Motor
• Ningbo Volcanic Electric
• Electromate
• AMETEK
• Johnson Electric
• Siemens
• Toshiba
• GE Industrial Motors

Brushed Direct Current (DC) by Segment

The study includes a forecast for the global brushed direct current (DC) motor by type, voltage, application, technology, and region

Brushed Direct Current (DC) Market by Type [Analysis by Value from 2018 to 2030]:

• Series Wound Brush DC Motors
• Permanent Magnet Brush DC Motors
• Shunt Wound Brush DC Motors
• Compound Wound Brush DC Motors

Brushed Direct Current (DC) Market by Voltage [Analysis by Value from 2018 to 2030]:

• Less than 75 kV
• Between 75 kV - 375 kV
• Higher than 375 kV

Brushed Direct Current (DC) Market by Application [Analysis by Value from 2018 to 2030]:

• Residential
• Commercial
• Industrial
• Automotive

Brushed Direct Current (DC) Market by Region [Shipment Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Brushed Direct Current (DC) Motor Market

Different technological advancements and industrial demand changes in various regions have led to the growth of the brushed DC motor market.

• United States: This is a result of automation and developments in electric vehicle applications that have been targeted at enhancing efficiency while reducing maintenance costs for brushed DC motors leading to a boost in sales volume.
• China: Major activities that are geared toward consumer electronics and industrial machinery have seen the country's prominence gain momentum on the Brushed DC motor market with increased manufacturing capacities.
• Germany: Precision engineering combined with an inherent inclination towards automation systems has positioned Germany at the forefront of advancements taking place in this sector, thereby improving reliability and performance characteristics for both automotive and industrial uses.
• India: A drive toward affordable, efficient solutions for motors in developing countries has generated increasing demand for brushed DC Motors, which are now used extensively across India's automotive industry as well as its home appliance sector.
• Japan on its part is focusing more on robotics and consumer electronics by designing high-performance brushed DC motors emphasizing miniaturization to ensure energy conservation for modern applications.

Features of the Global Brushed Direct Current (DC) Motor Market

Market Size Estimates: Brushed direct current (DC) market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Brushed direct current (DC) market size by type, voltage, application, and region in terms of value ($B).

Regional Analysis: Brushed direct current (DC) market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different types, voltages, applications, and regions for the brushed direct current (DC) market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the brushed direct current (DC) market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the brushed direct current (DC) motor market by type (series wound brush DC motors, permanent magnet brush DC motors, shunt wound brush DC motors, and compound wound brush DC motors), voltage (less than 75 kv, between 75 kv - 375 kv, and higher than 375 kv), application (residential, commercial, industrial, and automotive), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Brushed Direct Current (DC) Motor Market: Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global Brushed Direct Current (DC) Motor Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global Brushed Direct Current (DC) Motor Market by Type
  • 3.3.1: Series Wound Brush DC Motors
  • 3.3.2: Permanent Magnet Brush DC Motors
  • 3.3.3: Shunt Wound Brush DC Motors
  • 3.3.4: Compound Wound Brush DC Motors
• 3.4: Global Brushed Direct Current (DC) Motor Market by Voltage
  • 3.4.1: Less than 75 kV
  • 3.4.2: Between 75 kV - 375 kV
  • 3.4.3: Higher than 375 kV
• 3.5: Global Brushed Direct Current (DC) Motor Market by Application
  • 3.5.1: Residential
  • 3.5.2: Commercial
  • 3.5.3: Industrial
  • 3.5.4: Automotive

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global Brushed Direct Current (DC) Motor Market by Region
• 4.2: North American Brushed Direct Current (DC) Motor Market
  • 4.2.1: North American Brushed Direct Current (DC) Motor Market by Type: Series Wound Brush DC Motors, Permanent Magnet Brush DC Motors, Shunt Wound Brush DC Motors, and Compound Wound Brush DC Motors
  • 4.2.2: North American Brushed Direct Current (DC) Motor Market by Application: Residential, Commercial, Industrial, and Automotive
• 4.3: European Brushed Direct Current (DC) Motor Market
  • 4.3.1: European Brushed Direct Current (DC) Motor Market by Type: Series Wound Brush DC Motors, Permanent Magnet Brush DC Motors, Shunt Wound Brush DC Motors, and Compound Wound Brush DC Motors
  • 4.3.2: European Brushed Direct Current (DC) Motor Market by Application: Residential, Commercial, Industrial, and Automotive
• 4.4: APAC Brushed Direct Current (DC) Motor Market
  • 4.4.1: APAC Brushed Direct Current (DC) Motor Market by Type: Series Wound Brush DC Motors, Permanent Magnet Brush DC Motors, Shunt Wound Brush DC Motors, and Compound Wound Brush DC Motors
  • 4.4.2: APAC Brushed Direct Current (DC) Motor Market by Application: Residential, Commercial, Industrial, and Automotive
• 4.5: ROW Brushed Direct Current (DC) Motor Market
  • 4.5.1: ROW Brushed Direct Current (DC) Motor Market by Type: Series Wound Brush DC Motors, Permanent Magnet Brush DC Motors, Shunt Wound Brush DC Motors, and Compound Wound Brush DC Motors
  • 4.5.2: ROW Brushed Direct Current (DC) Motor Market by Application: Residential, Commercial, Industrial, and Automotive

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Brushed Direct Current (DC) Motor Market by Type
  • 6.1.2: Growth Opportunities for the Global Brushed Direct Current (DC) Motor Market by Voltage
  • 6.1.3: Growth Opportunities for the Global Brushed Direct Current (DC) Motor Market by Application
  • 6.1.4: Growth Opportunities for the Global Brushed Direct Current (DC) Motor Market Region
• 6.2: Emerging Trends in the Global Brushed Direct Current (DC) Motor Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Brushed Direct Current (DC) Motor Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Brushed Direct Current (DC) Motor Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Nidec Motor
• 7.2: Ningbo Volcanic Electric
• 7.3: Electromate
• 7.4: AMETEK
• 7.5: Johnson Electric
• 7.6: Siemens
• 7.7: Toshiba
• 7.8: GE Industrial Motors