한글목차

송전·배전용 FRP 폴의 동향과 예측

세계의 송배전 FRP 폴 시장의 미래는 산업, 상업, 주택 시장에서의 기회로 유망시되고 있습니다. 세계의 송배전용 FRP 폴 시장은 2024-2030년에 CAGR 6.0%로 성장할 것으로 예측됩니다. 이 시장의 주요 촉진요인은 가볍고 내구성이 뛰어나며 부식에 강한 인프라 솔루션에 대한 수요 증가, 전력망 현대화 및 재생 에너지원 채택에 대한 강조, 복합재료 기술의 발전 등을 꼽을 수 있습니다.

• Lucintel의 예측에 따르면 소재 카테고리에서 섬유는 예측 기간 중 가장 높은 성장률을 보일 것으로 예상됩니다.
• 용도별로는 산업용이 가장 높은 성장세를 보일 것으로 예상됩니다.
• 지역별로는 APAC 지역이 예측 기간 중 가장 높은 성장세를 보일 것으로 예상됩니다.

트랜스미션 및 배전 시장에서 FRP 폴의 전략적 성장 기회

급격한 도시화와 인구 증가는 송배전 시장에서 FRP 폴의 성장 잠재력을 높이고 있습니다. 제조업체는 특정 용도에 집중함으로써 시장 점유율을 확대하고 이러한 추세를 활용할 수 있습니다.

• 해양 에너지 인프라: FRP 극 시장의 가장 두드러진 성장 기회는 해상 풍력발전과 태양광발전으로, FRP 극은 부식에 강하므로 대부분의 재료가 실패하는 수역에서도 사용할 수 있으며, 완벽한 솔루션을 제공합니다. 전 세계에서 재생 에너지에 대한 수요가 증가함에 따라 해상 인프라에서 FRP 폴의 사용이 더 많이 요구될 것으로 예상됩니다.
• 신흥 시장에서의 농촌 전기화: 아프리카, 동남아시아, 라틴아메리카의 외딴 지역과 같이 단열재 생산량이 적은 지역에서는 FRP 폴이 전력 공급 문제에 대한 저렴하고 신뢰할 수 있는 솔루션이 될 수 있습니다. 경량이기 때문에 쉽게 운반할 수 있고, 접근이 어려운 곳에도 설치할 수 있으며, 에너지 접근성 격차 해소에 기여할 수 있습니다.
• 도시 인프라 개선: 새로운 전력망 개발이 진행됨에 따라 FRP 전봇대는 높은 잠재 시장을 가지고 있습니다. 이 전봇대는 기상 조건, 부식, 공해 및 교통량이 많은 차량과 같은 환경에 대한 내구성이 뛰어나기 때문에 오래된 나무 전봇대나 강철 전봇대를 대체할 수 있습니다.
• 재해에 강한 인프라 프로젝트 홍수, 폭풍, 산불, 지진이 잦은 지역에서는 재해에 강한 인프라가 필요합니다. 이러한 지역에서 FRP 폴은 내화성, 내후성이라는 강력한 판매 포인트를 가지고 있습니다. 이는 미국, 일본, 유럽 일부 지역에서 큰 잠재 시장을 창출하고 있습니다.
• 스마트 그리드의 추가 개발 및 적응: FRP 전봇대 개발의 또 다른 분야는 모니터링 장비가 장착된 스마트 그리드용 전봇대입니다. 이 전봇대는 전력망 성능, 전력망 고장, 에너지 흐름, 에너지 공급 자원 등 전력망 관련 데이터를 수집, 전송 및 분석할 수 있으며, 이를 통해 전력 회사는 행동을 강화하고 시간을 단축할 수 있습니다.

이러한 성장 기회는 송전 및 배전 시장에서 FRP 전봇대가 중요한 역할을 할 것으로 예상됩니다. 재생 에너지, 농촌 전기화, 방재 인프라 등의 용도에 집중하는 것은 생산자가 시장과 부문 개발을 촉진하고 새로운 지평에 도달하는 데 도움이 될 것으로 보입니다.

송배전 FRP 전주 시장 활성화 요인 및 과제

몇 가지 기술적, 경제적, 정치적 요인이 송전 및 배전용 FRP 극 시장에 영향을 미치고 있습니다. 이러한 시장 성장 촉진요인 및 과제는 시장 성장 방향에 큰 영향을 미칩니다.

송전 및 배전용 FRP 폴 시장을 주도하는 요인은 다음과 같습니다. :

• 내식성 및 긴 수명: FRP 폴의 특징은 다른 기존 재료보다 내식성이 높아 가혹한 조건에서도 사용할 수 있다는 것입니다. 신뢰성이 높고 수명이 길기 때문에 단기간에 수리 및 교체할 필요가 적어 각국에서 인정받고 있습니다.
• 유지보수 관련 비용 효율성: 나무 기둥이나 철 기둥은 유지보수가 필요하지만 FRP 기둥은 거의 필요하지 않습니다. 장기적인 운영 비용이 낮기 때문에 정비 비용을 절감하려는 전력 회사에게 매력적입니다.
• 사회 의식과 환경 정책: 모든 국가에서 공해에 대한 법률이 엄격해지고, 전력 회사도 유해한 재료를 사용하지 않도록 대응하고 있으며, FRP 전봇대는 재활용이 가능하고 환경 친화적인 재료로 만들어져 각 단체의 목표 달성에 기여하고 있습니다.
• 복합재료의 발전: 수지계, 섬유계 기술 설계가 비약적으로 발전하여 FRP 극의 성능이 크게 향상되었습니다. 그 결과 FRP 폴의 성능이 비약적으로 향상되었습니다. 이러한 소재는 FRP 폴의 강도를 향상시켜 가혹한 기상 조건에서도 더 많은 하중을 견딜 수 있습니다.
• 재생에너지에 대한 수요 증가: 태양광, 풍력 등 재생에너지 개발이 FRP 폴 시장을 주도하고 있습니다. 이 기둥은 태양광발전소, 풍력 터빈 타워 및 기타 재생 에너지 구조물 건설에 도움이 됩니다.

송배전 시장에서 FRP 전봇대의 과제는 다음과 같습니다. :

• 높은 초기 비용: FRP 폴은 장기적으로 비용 효율성이 뛰어나지만, 기존 재료를 사용하는 것과 달리 초기 구매 비용이 높기 때문에 일부 기업은 사용을 주저하고 있습니다.
• 일부 지역에서는 인지도가 낮다: 많은 지역에서 많은 전력회사들이 아직 FRP 기둥 사용의 이점을 알지 못합니다. 널리 보급하려면 사용을 촉진해야 합니다.
• 대체 재료와의 경쟁: 목재, 강철, 심지어 콘크리트와 같은 재료 선택은 특히 비용을 최우선으로 고려하는 경우 여전히 경쟁력이 있습니다. 따라서 제조업체는 FRP 폴의 장기적인 이점을 강조하여 판매를 강화해야 합니다.

송배전용 FRP 폴 시장의 성장을 결정하는 대부분의 요인은 청정 기술 업그레이드, 효율적인 비용 접근법, 공해 관련 규제 등입니다. 그러나 시장은 여전히 높은 초기 비용과 기존 소재와의 경쟁이라는 문제에 직면해 있습니다.

목차

제1장 개요

제2장 세계의 송전·배전용 FRP 폴 시장 : 시장 역학

• 서론, 배경, 분류
• 공급망
• 업계 촉진요인과 과제

제3장 2018-2030년 시장 동향과 예측 분석

• 거시경제 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 송전·배전용 FRP 폴 시장 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 송전·배전용 FRP 폴 시장 : 재질별
  • 파이버
  • 수지
• 세계의 송전·배전용 FRP 폴 시장 : 제조 공정별
  • Pultrusion
  • 필라멘트 와인딩
  • 원심 주조
• 세계의 송전·배전용 FRP 폴 시장 : 용도별
  • 산업
  • 커머셜
  • 주택

제4장 2018-2030년 지역별 시장 동향과 예측 분석

• 지역별 세계 송전·배전용 FRP 폴 시장
• 북미의 송전·배전용 FRP 폴 시장
• 유럽의 송전·배전용 FRP 폴 시장
• 아시아태평양의 송전·배전용 FRP 폴 시장
• 기타 지역의 송전·배전용 FRP 폴 시장

제5장 경쟁 분석

• 제품 포트폴리오 분석
• 운영 통합
• Porter's Five Forces 분석

제6장 성장 기회와 전략 분석

• 성장 기회 분석
  • 세계의 송전·배전용 FRP 폴 시장의 재질별 성장 기회
  • 제조 프로세스 별 세계 송전·배전용 FRP 폴 시장의 성장 기회
  • 세계의 송전·배전용 FRP 폴 시장의 용도별 성장 기회
  • 지역별 세계의 송전·배전용 FRP 폴 시장의 성장 기회
• 세계의 송전·배전용 FRP 폴 시장의 새로운 동향
• 전략 분석
  • 신제품 개발
  • 세계의 송전·배전용 FRP 폴 시장의 생산능력 확대
  • 세계의 송전·배전용 FRP 폴 시장의 합병, 인수, 합병사업
  • 인증과 라이선싱

제7장 주요 기업의 기업 개요

• RS Technologies
• Creative Composites Group
• Valmont Industries
• Geotek
• Strongwell
• Elsewedy Electric
• Highland Industries
• Petrofisa do Brasil
• Jiangsu Jiuding New Material
• NOV

영문목차

FRP Pole in Power Transmission & Distribution Trends and Forecast

The future of the global FRP pole in the power transmission & distribution market looks promising with opportunities in the industrial, commercial, and residential markets. The global FRP pole in the power transmission & distribution market is expected to grow with a CAGR of 6.0% from 2024 to 2030. The major drivers for this market are the increasing demand for lightweight, durable, and corrosion-resistant infrastructure solutions, the growing emphasis on grid modernization and the adoption of renewable energy sources, and advancements in composite material technologies.

• Lucintel forecasts that, within the material category, fiber is expected to witness the highest growth over the forecast period.
• Within the application category, industrial applications are expected to witness the highest growth.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the FRP Pole in Power Transmission & Distribution Market

The FRP pole in power transmission and distribution market is witnessing some trends that are said to be Increasing in scope and functioning and in general, the leaning is towards more performance and scenery than technology amongst utilities and energy companies as well as improving infrastructure. There is a sense of unmet needs that drives the development of T&D systems that also address the economy.

• Adoption of Smart Grid Technologies has Increased: Currently, FRP poles are being fitted to smart grid technologies to boost energy efficiency and also support the grid. Smart sensors in these FRP poles are capable of performing load monitoring, fault detection, and even counter-reporting on a timely basis which enhances the grid's responsiveness while minimizing chances of outages. This trend is increasingly putting advanced FRP pole solutions in great demand.
• Disaster-Resilient Infrastructure: There is a high demand for the construction of power infrastructures that are stronger and can withstand hurricanes, fires, earthquakes floods among other natural disasters. Based on how FRP poles can best withstand fire, wind, and water, FRP poles have been designated for new installations and replacement of old infrastructures. This trend is common in places like the U.S. Japan and other parts of Europe where extreme weather conditions are experienced.
• Sustainable Materials are used in this New Construction: Given the target of energy companies around the world to cut their carbon activities and make more sustainable utilities, FRP poles are viewed as an improvement from ordinary wooden or steel materials. FRP poles help design a green consumer power network as they afterward lessen the number of resources used in the manufacturing processes and extend the service time.
• Cost Reduction from Enhanced Manufacturing Processes: New measures are being put in place to develop new types of inexpensive ways of constructing the FRP poles. With the pace at which the manufacturing processes are changing, the pole manufacturing industry may optimize its processes using cheaper FRP materials. As a result, more of them are being used in new regions as well as regions where consideration is made in respect of the price.
• Growth of Renewable Energy Infrastructure: The more there is a shift towards renewable energy sources - wind and solar in particular - the more the need for FRP poles. Well, these types of poles are best suited for wind towers and solar farms as well as grid extensions in renewable energy. They are light, can resist wear and tear, and are strong; therefore, are a solution for energy systems that are highly reliable and do not need a lot of maintenance.

These developments point toward the increasing significance of FRP poles in the power transmission and distribution market. Whether integrating along with smarter grids, more resilient systems, empowered approaches, or all of those to enable energy transmission in the future, these FRP poles emerge as the most convenient materials.

Recent Developments in the FRP Pole in Power Transmission & Distribution Market

The FRP pole in the power transmission and distribution market has also experienced some key developments that are improving the efficiency, reliability, life span, and overall economy of operation of such poles. These improvements are making FRP poles at the forefront among utilities across the globe.

• Resin Technology Enhancements: Fabrication of advanced resin systems such as epoxy and vinyl ester resins, has introduced tremendous advantages in the mechanical properties and anti-corrosive characteristics of FRP poles. These materials are used more often in applications involving extreme weather conditions, thereby improving the service life of FRP poles.
• New Blossom of Automation: Alternatively, new manufacturing processes of poles including filament winding and pultrusion have revolutionized the way FRP poles are cast increasing their strength and uniformity. These processes bring down the production expenses and increase the size of the market for FRP poles making it more appealing for large-scale development projects.
• More Stress on Sustainability: The rising focus on cleaner energy and infrastructure has resulted in the increased use of materials such as fiberglass-reinforced plastic (FRP) poles. These poles are made of materials that can be recycled and tend to last longer than wood or steel poles hence cutting down on waste and the frequency of replacements.
• Offshore and Remote Area Applications: Fiber Reinforced Plastic is efficiently and increasingly utilized in offshore installations and in remote areas that pose constraints for the transportation of materials and maintenance. Due to weight and accelerated corrosion resistance, these materials are used where ordinary materials are inadequate due to location.
• Collaboration between Utility Companies and Manufacturers: As they look for FRP pole manufacturers, utility companies are on the other hand looking to create partnerships with these manufacturers in a bid to find solutions for specific regions. This trend is helping in the integration of FRP poles in areas that experience extreme weather conditions such as high humidity, saline, and seismic activities.

These improvements are making FRP poles in the power transmission and distribution market. With the improvement of the efficiency of production processes and the growing concern over the usage of FRP poles is expected to spread more in the developed economies and developed adverse conditions.

Strategic Growth Opportunities for FRP Pole in Power Transmission & Distribution Market

Rapid urbanization and population growth are creating the rising potential for the FRP pole in the power transmission and distribution market. By focusing on certain applications, the manufacturers may even increase their market share and leverage such trends.

• Offshore Energy Infrastructure: The most prominent opportunity for the growth of the market for FRP poles is in offshore wind energy and solar energy generation. These poles provide a perfect solution as they are resistant to corrosion and are therefore suited even in water bodies where most materials fail. With the global demand for renewable energy increasing, offshore infrastructures will require the use of FRP poles more often than not.
• Rural Electrification in Emerging Markets: In areas where there is low production of insulating materials such as remote rural regions of Africa, Southeast Asia, and Latin America, FRP poles provide a cheap and reliable solution to electricity supply challenges. Due to their lower weight, they can be easily carried and erected in those places which are not easily accessible thereby helping to close the energy access gap.
• Improvement of Urban Infrastructure: As civilization progresses in developing new power transmission grids there is a high potential market lying on the FRP Poles in the city. These poles can be used in replacement for old wooden and steel poles as they are more durable to weather conditions, corrosion, and environmental hard like pollution and traffic-heavy vehicles.
• Disaster Resistant Infrastructure projects: Floods, wind storms, wildfires, and earthquake-prone areas create demand for disaster-resistant infrastructure. In those areas, FRP poles possess fire and weather the properties' strong selling attributes. This creates a great potential market in the US, Japan, and some parts of Europe.
• Further Development and Adaptation of Smart Grids: Another segment of the FRP pole-oriented development is pro-built poles for smart grids equipped with monitoring devices. These poles are capable of collecting, transmitting, and analyzing data related to the grid such as grid performance, grid faults, energy flows, and energy-sending resources, thereby making it possible for utilities to enhance and reduce the time spent in actions.

These growth opportunities further envisage the critical role that FRP poles in the power transmission and distribution market. Concentrating on such application areas as renewable energy, rural electrification, and disaster-proof infrastructure will help producers promote market and segment development and reach new horizons.

FRP Pole in Power Transmission & Distribution Market Driver and Challenges

Several technological, economic, and political factors affect the FRP pole market for power transmission and distribution. These drivers and challenges significantly impact the direction of market growth.

The factors responsible for driving the FRP pole in the power transmission and distribution market include:

• Corrosion Resistance and Longevity: The unique feature of FRP poles is that they are more corrosion-resistant than other conventional materials and can therefore be used in extreme conditions. Their reliability and long service life reduce the need for repairs and replacements over short periods, thereby enhancing their acceptance across countries.
• Cost-Effectiveness concerning Maintenance: Wooden and steel poles require a lot of maintenance, but FRP poles need little attention. Their low operating costs over the long term make them more appealing to utilities that need to reduce maintenance expenses.
• Social Awareness and Environmental Policies: In every country, stricter laws against pollution have been implemented, and utilities are responding by using less harmful materials. Since FRP poles are recyclable and made from environmentally friendly materials, they help organizations achieve their goals.
• Advancement in Composite Materials: Resin and fiber systems have witnessed dramatic modifications in their technological designs, and as a result, the performance levels of FRP poles have greatly improved. These materials increase the strength of FRP poles, allowing them to bear more loads even during extreme weather conditions.
• Rising Demand for Renewable Energy: The development of renewable energy sources such as solar and wind is driving the market for FRP poles. These poles will be useful in building solar power stations, wind turbine towers, and other renewable energy structures.

Challenges in the FRP pole in the power transmission and distribution market include:

• High Initial Cost: Although FRP poles are cost-efficient in the long run, some companies hesitate to use them due to the high initial cost of purchasing them, as opposed to using traditional materials.
• Limited Awareness in Certain Regions: In many places, many utilities are still unaware of the benefits of using FRP poles. Their use needs to be promoted if widespread adoption is to occur.
• Competition from Alternative Materials: Material choices such as wood, steel, and even concrete remain competitive, especially where cost is a primary consideration. It is therefore necessary for manufacturers to emphasize the long-term benefits of FRP poles to enhance sales.

Most of the factors dictating the growth of the FRP pole market in power transmission and distribution include clean technology upgrades, efficient cost approaches, and regulations on pollution. However, the market still faces challenges such as high initial costs and competition from conventional materials.

List of FRP Pole in Power Transmission & Distribution Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies FRP pole in power transmission & distribution companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the FRP pole in power transmission & distribution companies profiled in this report include-

• RS Technologies
• Creative Composites Group
• Valmont Industries
• Geotek
• Strongwell
• Elsewedy Electric
• Highland Industries
• Petrofisa do Brasil
• Jiangsu Jiuding New Material
• NOV

FRP Pole in Power Transmission & Distribution by Segment

The study includes a forecast for the global FRP pole in power transmission & distribution by material, manufacturing process, application, and region.

FRP Pole in Power Transmission & Distribution Market by Material [Analysis by Value from 2018 to 2030]:

• Fiber
• Resin

FRP Pole in Power Transmission & Distribution Market by Manufacturing Process [Analysis by Value from 2018 to 2030]:

• Pultrusion
• Filament Winding
• Centrifugal Casting

FRP Pole in Power Transmission & Distribution Market by Application [Analysis by Value from 2018 to 2030]:

• Industrial
• Commercial
• Residential

FRP Pole in Power Transmission & Distribution Market by Region [Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the FRP Pole in Power Transmission & Distribution Market

There has been a growing trend in the power transmission and distribution (T&D) market for the use of fiber-reinforced plastic (FRP) poles across the globe, owing to the progress of fiber-reinforced polymers as lightweight, stronger, and corrosion-free materials. As utilities and energy companies aim to improve resilience in infrastructure, there are many benefits to using FRP poles in comparison to traditional replacements like wood and steel. Some of these benefits include a longer lifespan, lower upkeep costs, and better performance under extreme weather conditions.

• United States: In the United States, the trend of using FRP poles in power transmission and distribution has been on the rise due to the ever-increasing demand for infrastructure refurbishment and an emphasis on disaster-resistant networks. Utilities in extreme weather states, such as California and Florida, which face hurricanes and wildfires, are increasingly shifting to FRP poles. Composite poles are immune to the elements, fire, and weather damage, unlike conventional wooden or steel poles. Additionally, research and development of better composite materials and manufacturing systems are making affordable and high-strength FRP poles possible.
• China: China, the largest waterworks market in the world, has been spending a significant amount of resources to upgrade its power supply networks. The application of FRP poles has also been adopted in rural areas and for the installation of transmission lines in regions with severe weather conditions. With many infrastructure-building projects underway, there is an increasing demand for long-lasting FRP pole materials that require little upkeep. Moreover, the country's officials are in favor of promoting green energy trends and using ecologically friendly materials.
• Germany: The German power transmission and distribution system has been undergoing improvements in recent years as part of the country's energy transition. The country is using FRP poles to strengthen and improve the efficiency of the grid, aiming for rural electrification and enhancing resilience in forests and other storm-prone areas. There are also plans to increase the production of FRP poles in Germany, aligned with the so-called "Renewable Energy Future," as the use of wind and solar energy rises.
• India: The growing energy demand, which parallels the expansion of the grid, presents a huge market for FRP poles in the power T&D sector. Electric utilities in India are using FRP poles in rural and remote areas where access to conventional materials is difficult. These poles are especially useful in areas with high humidity and salt exposure, offering better corrosion resistance. Furthermore, the demand for FRP poles is further boosted by advancements in technologies, particularly the development of smart grids and various renewable energy projects, especially solar power, in India.
• Japan: Japan is one of the early adopters of FRP poles in power transmission lines, especially in earthquake-prone and coastal regions, where high-performance materials are essential. The rehabilitation of the electrical grid with FRP poles has become a crucial part of post-earthquake recovery in Japan. These poles are lightweight, can withstand extreme temperatures, and are resistant to corrosion. A Japanese company manufactures FRP poles and, using its technology continues to innovate and enhance the design of FRP poles for urban and rural applications.

Features of the Global FRP Pole in Power Transmission & Distribution Market

Market Size Estimates: FRP pole in power transmission & distribution market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: FRP pole in power transmission & distribution market size by material, manufacturing process, application, and region in terms of value ($B).

Regional Analysis: FRP pole in power transmission & distribution market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different material, manufacturing process, application, and regions for the FRP pole in power transmission & distribution market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the FRP pole in power transmission & distribution market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the FRP pole in power transmission & distribution market by material (fiber and resin), manufacturing process (pultrusion, filament winding, and centrifugal casting), application (industrial, commercial, and residential), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global FRP Pole in Power Transmission & Distribution Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global FRP Pole in Power Transmission & Distribution Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global FRP Pole in Power Transmission & Distribution Market by Material
  • 3.3.1: Fiber
  • 3.3.2: Resin
• 3.4: Global FRP Pole in Power Transmission & Distribution Market by Manufacturing Process
  • 3.4.1: Pultrusion
  • 3.4.2: Filament Winding
  • 3.4.3: Centrifugal Casting
• 3.5: Global FRP Pole in Power Transmission & Distribution Market by Application
  • 3.5.1: Industrial
  • 3.5.2: Commercial
  • 3.5.3: Residential

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global FRP Pole in Power Transmission & Distribution Market by Region
• 4.2: North American FRP Pole in Power Transmission & Distribution Market
  • 4.2.1: North American Market by Material: Fiber and Resin
  • 4.2.2: North American Market by Application: Industrial, Commercial, and Residential
• 4.3: European FRP Pole in Power Transmission & Distribution Market
  • 4.3.1: European Market by Material: Fiber and Resin
  • 4.3.2: European Market by Application: Industrial, Commercial, and Residential
• 4.4: APAC FRP Pole in Power Transmission & Distribution Market
  • 4.4.1: APAC Market by Material: Fiber and Resin
  • 4.4.2: APAC Market by Application: Industrial, Commercial, and Residential
• 4.5: ROW FRP Pole in Power Transmission & Distribution Market
  • 4.5.1: ROW Market by Material: Fiber and Resin
  • 4.5.2: ROW Market by Application: Industrial, Commercial, and Residential

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global FRP Pole in Power Transmission & Distribution Market by Material
  • 6.1.2: Growth Opportunities for the Global FRP Pole in Power Transmission & Distribution Market by Manufacturing Process
  • 6.1.3: Growth Opportunities for the Global FRP Pole in Power Transmission & Distribution Market by Application
  • 6.1.4: Growth Opportunities for the Global FRP Pole in Power Transmission & Distribution Market by Region
• 6.2: Emerging Trends in the Global FRP Pole in Power Transmission & Distribution Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global FRP Pole in Power Transmission & Distribution Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global FRP Pole in Power Transmission & Distribution Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: RS Technologies
• 7.2: Creative Composites Group
• 7.3: Valmont Industries
• 7.4: Geotek
• 7.5: Strongwell
• 7.6: Elsewedy Electric
• 7.7: Highland Industries
• 7.8: Petrofisa do Brasil
• 7.9: Jiangsu Jiuding New Material
• 7.10: NOV