Cold Heading Machine Market Report by Type, Tooling, Distribution Channel, End User Industry, and Region 2024-2032
세계 냉간 압조기 시장 규모는 2023년 37억 달러에 달했습니다. 향후 IMARC 그룹은2024-2032년간 3.8%의 연평균 성장률(CAGR)로 2032년까지 53억 달러에 달할 것으로 예상하고 있습니다.
콜드 헤딩 머신은 일련의 강력한 해머를 사용하여 금속 망상 또는 망상에 가까운 금속 부품을 형성하는 기계 장비를 말합니다. 열을 가하지 않고 금속 와이어에서 지정된 모양을 만드는 다양한 단계를 수행합니다. 해머, 다이 및 펀치를 고속으로 반복적으로 사용합니다. 콜드 헤딩 머신은 헤딩 부품, 리벳, 나사, 볼트 및 테이퍼 롤러 헤딩을 생산하는 데 널리 사용됩니다. 인장 강도가 높고 생산 효율이 향상되어 원자재 낭비를 줄이고 생산 비용을 절감할 수 있습니다. 냉간 압조기는 압력 센서, 자동차 센서, 엔진 제어 장치(ECU)와 같은 다양한 자동차 제어 장치의 핀에도 일반적으로 사용됩니다. 금속 절단기와 비교하여 냉간 압조기는 공차와 효율성을 유지하면서 대량의 빠른 생산을 가능하게 합니다. 따라서 전기, 자동차, 항공우주, 방위 등 다양한 산업 분야에서 널리 사용되고 있습니다.
냉간 압조기 시장 동향 :
세계 자동차 산업의 괄목할만한 성장은 시장 전망을 밝게 하는 중요한 요인 중 하나입니다. 또한, 전기 산업에서 냉간 압조기의 보급이 시장 성장을 가속하고 있습니다. 또한 진동을 측정하고 고장을 정확하게 예측하는 원격 기계 모니터링 시스템의 개발 등 다양한 기술 발전이 시장 성장을 가속하고 있습니다. 이와 함께, 환경에 대한 인식이 높아짐에 따라 주요 기업들은 환경 친화적이고 폐기물이 없는 제품 변형을 생산할 수밖에 없어 시장 성장에 긍정적인 영향을 미치고 있습니다. 이와는 별도로 중장비 및 기계에 대한 수요 증가와 건설 산업에서 냉간 압착의 사용 증가는 전 세계적으로 시장의 추가 성장을 위한 원동력이 되고 있습니다.
목차
제1장 서문
제2장 조사 범위와 조사 방법
- 조사 목적
- 이해관계자
- 데이터 소스
- 시장 추정
- 조사 방법
제3장 주요 요약
제4장 서론
제5장 세계의 냉간 압조기 시장
- 시장 개요
- 시장 실적
- COVID-19의 영향
- 시장 예측
제6장 시장 분석 : 유형별
- Single-Die
- Two-Die Three-Header
- Multiple Header
- 기타
제7장 시장 분석 : 툴별
제8장 시장 분석 : 유통 채널별
제9장 시장 분석 : 최종사용자 산업별
제10장 시장 분석 : 지역별
- 북미
- 아시아태평양
- 유럽
- 독일
- 프랑스
- 영국
- 이탈리아
- 스페인
- 러시아
- 기타
- 라틴아메리카
- 중동 및 아프리카
제11장 SWOT 분석
제12장 밸류체인 분석
제13장 Porter의 Five Forces 분석
- 개요
- 바이어의 교섭력
- 공급 기업의 교섭력
- 경쟁 정도
- 신규 진출업체의 위협
- 대체품의 위협
제14장 가격 분석
제15장 경쟁 구도
- 시장 구조
- 주요 기업
- 주요 기업 개요
- Asahi Sunac Corporation
- Carlo Salvi S.p.A.(Hatebur Umformmaschinen AG)
- GFM GmbH Steyr
- Lan Dee Woen Factory Co. Ltd
- Nakashimada Engineering Works Ltd
- National Machinery
- Nedschroef Machinery
- SACMA Limbiate S.p.A.
- Sakamura Machine Co. Ltd
- Sijin Intelligent Forming Machinery Co. Ltd.
- Tanisaka Iron Works Co. Ltd.
- Wrentham Tool Group
LSH
The global cold heading machine market size reached US$ 3.7 Billion in 2023. Looking forward, IMARC Group expects the market to reach US$ 5.3 Billion by 2032, exhibiting a growth rate (CAGR) of 3.8% during 2024-2032.
A cold heading machine refers to mechanical equipment that uses a series of powerful hammers to form net-shaped or near net-shaped parts of metal. It performs various steps to create a specified shape from a metal wire without adding heat. It uses a replicate series of hammers, diyes, and punches at high speed. Cold heading machines are widely used to manufacture headed parts, rivets, screws, bolts, and taper roller heading. It provides greater tensile strength and enhanced production efficiencies to reduce raw material waste and lower production costs. The cold heading machine is also commonly used in the pins for various automobile control units, such as pressure sensors, vehicle-mounted sensors, and engine control units (ECUs). In comparison to metal cutting machines, cold heading machines allow rapid production of large quantities while maintaining tolerances and efficiency. As a result, it finds extensive application across various industries, such as electrical, automotive, aerospace, and defense.
Cold Heading Machine Market Trends:
Significant growth in the automotive industry across the globe is one of the key factors creating a positive outlook for the market. Additionally, the widespread adoption of cold heading machines across the electrical industry is favoring the market growth. Moreover, various technological advancements, such as the development of remote machine monitoring systems to measure vibrations and accurately predict faults, are boosting market growth. In line with this, the rising environmental consciousness has compelled the key players to manufacture eco-friendly and zero-waste product variants, which is positively impacting the market growth. Apart from this, the rising demand for heavy equipment and machinery and the increasing use of cold heading in the construction industry are driving the market toward growth further across the globe.
Key Market Segmentation:
IMARC Group provides an analysis of the key trends in each sub-segment of the global cold heading machine market report, along with forecasts at the global, regional and country level from 2024-2032. Our report has categorized the market based on type, tooling, distribution channel and end user industry.
Breakup by Type:
Single-Die
Two-Die Three-Header
Multiple Header
Others
Breakup by Tooling:
Punches
Dies
Breakup by Distribution Channel:
Direct
Indirect
Breakup by End User Industry:
Automotive
Electrical
Industrial
Aerospace and Defense
Others
Breakup by Region:
North America
United States
Canada
Asia-Pacific
China
Japan
India
South Korea
Australia
Indonesia
Others
Europe
Germany
France
United Kingdom
Italy
Spain
Russia
Others
Latin America
Brazil
Mexico
Others
Middle East and Africa
Competitive Landscape:
The competitive landscape of the industry has also been examined along with the profiles of the key players being Asahi Sunac Corporation, Carlo Salvi S.p.A. (Hatebur Umformmaschinen AG), GFM GmbH Steyr, Lan Dee Woen Factory Co. Ltd, Nakashimada Engineering Works Ltd, National Machinery, Nedschroef Machinery, SACMA Limbiate S.p.A., Sakamura Machine Co. Ltd, Sijin Intelligent Forming Machinery Co. Ltd., Tanisaka Iron Works Co. Ltd. and Wrentham Tool Group.
Key Questions Answered in This Report:
- How has the global cold heading machine market performed so far and how will it perform in the coming years?
- What has been the impact of COVID-19 on the global cold heading machine market?
- What are the key regional markets?
- What is the breakup of the market based on the type?
- What is the breakup of the market based on the tooling?
- What is the breakup of the market based on the distribution channel?
- What is the breakup of the market based on the end user industry?
- What are the various stages in the value chain of the industry?
- What are the key driving factors and challenges in the industry?
- What is the structure of the global cold heading machine market and who are the key players?
- What is the degree of competition in the industry?
Table of Contents
1 Preface
2 Scope and Methodology
- 2.1 Objectives of the Study
- 2.2 Stakeholders
- 2.3 Data Sources
- 2.3.1 Primary Sources
- 2.3.2 Secondary Sources
- 2.4 Market Estimation
- 2.4.1 Bottom-Up Approach
- 2.4.2 Top-Down Approach
- 2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
- 4.1 Overview
- 4.2 Key Industry Trends
5 Global Cold Heading Machine Market
- 5.1 Market Overview
- 5.2 Market Performance
- 5.3 Impact of COVID-19
- 5.4 Market Forecast
6 Market Breakup by Type
- 6.1 Single-Die
- 6.1.1 Market Trends
- 6.1.2 Market Forecast
- 6.2 Two-Die Three-Header
- 6.2.1 Market Trends
- 6.2.2 Market Forecast
- 6.3 Multiple Header
- 6.3.1 Market Trends
- 6.3.2 Market Forecast
- 6.4 Others
- 6.4.1 Market Trends
- 6.4.2 Market Forecast
7 Market Breakup by Tooling
- 7.1 Punches
- 7.1.1 Market Trends
- 7.1.2 Market Forecast
- 7.2 Dies
- 7.2.1 Market Trends
- 7.2.2 Market Forecast
8 Market Breakup by Distribution Channel
- 8.1 Direct
- 8.1.1 Market Trends
- 8.1.2 Market Forecast
- 8.2 Indirect
- 8.2.1 Market Trends
- 8.2.2 Market Forecast
9 Market Breakup by End User Industry
- 9.1 Automotive
- 9.1.1 Market Trends
- 9.1.2 Market Forecast
- 9.2 Electrical
- 9.2.1 Market Trends
- 9.2.2 Market Forecast
- 9.3 Industrial
- 9.3.1 Market Trends
- 9.3.2 Market Forecast
- 9.4 Aerospace and Defense
- 9.4.1 Market Trends
- 9.4.2 Market Forecast
- 9.5 Others
- 9.5.1 Market Trends
- 9.5.2 Market Forecast
10 Market Breakup by Region
- 10.1 North America
- 10.1.1 United States
- 10.1.1.1 Market Trends
- 10.1.1.2 Market Forecast
- 10.1.2 Canada
- 10.1.2.1 Market Trends
- 10.1.2.2 Market Forecast
- 10.2 Asia-Pacific
- 10.2.1 China
- 10.2.1.1 Market Trends
- 10.2.1.2 Market Forecast
- 10.2.2 Japan
- 10.2.2.1 Market Trends
- 10.2.2.2 Market Forecast
- 10.2.3 India
- 10.2.3.1 Market Trends
- 10.2.3.2 Market Forecast
- 10.2.4 South Korea
- 10.2.4.1 Market Trends
- 10.2.4.2 Market Forecast
- 10.2.5 Australia
- 10.2.5.1 Market Trends
- 10.2.5.2 Market Forecast
- 10.2.6 Indonesia
- 10.2.6.1 Market Trends
- 10.2.6.2 Market Forecast
- 10.2.7 Others
- 10.2.7.1 Market Trends
- 10.2.7.2 Market Forecast
- 10.3 Europe
- 10.3.1 Germany
- 10.3.1.1 Market Trends
- 10.3.1.2 Market Forecast
- 10.3.2 France
- 10.3.2.1 Market Trends
- 10.3.2.2 Market Forecast
- 10.3.3 United Kingdom
- 10.3.3.1 Market Trends
- 10.3.3.2 Market Forecast
- 10.3.4 Italy
- 10.3.4.1 Market Trends
- 10.3.4.2 Market Forecast
- 10.3.5 Spain
- 10.3.5.1 Market Trends
- 10.3.5.2 Market Forecast
- 10.3.6 Russia
- 10.3.6.1 Market Trends
- 10.3.6.2 Market Forecast
- 10.3.7 Others
- 10.3.7.1 Market Trends
- 10.3.7.2 Market Forecast
- 10.4 Latin America
- 10.4.1 Brazil
- 10.4.1.1 Market Trends
- 10.4.1.2 Market Forecast
- 10.4.2 Mexico
- 10.4.2.1 Market Trends
- 10.4.2.2 Market Forecast
- 10.4.3 Others
- 10.4.3.1 Market Trends
- 10.4.3.2 Market Forecast
- 10.5 Middle East and Africa
- 10.5.1 Market Trends
- 10.5.2 Market Breakup by Country
- 10.5.3 Market Forecast
11 SWOT Analysis
- 11.1 Overview
- 11.2 Strengths
- 11.3 Weaknesses
- 11.4 Opportunities
- 11.5 Threats
12 Value Chain Analysis
13 Porters Five Forces Analysis
- 13.1 Overview
- 13.2 Bargaining Power of Buyers
- 13.3 Bargaining Power of Suppliers
- 13.4 Degree of Competition
- 13.5 Threat of New Entrants
- 13.6 Threat of Substitutes
14 Price Analysis
15 Competitive Landscape
- 15.1 Market Structure
- 15.2 Key Players
- 15.3 Profiles of Key Players
- 15.3.1 Asahi Sunac Corporation
- 15.3.1.1 Company Overview
- 15.3.1.2 Product Portfolio
- 15.3.2 Carlo Salvi S.p.A. (Hatebur Umformmaschinen AG)
- 15.3.2.1 Company Overview
- 15.3.2.2 Product Portfolio
- 15.3.3 GFM GmbH Steyr
- 15.3.3.1 Company Overview
- 15.3.3.2 Product Portfolio
- 15.3.4 Lan Dee Woen Factory Co. Ltd
- 15.3.4.1 Company Overview
- 15.3.4.2 Product Portfolio
- 15.3.5 Nakashimada Engineering Works Ltd
- 15.3.5.1 Company Overview
- 15.3.5.2 Product Portfolio
- 15.3.6 National Machinery
- 15.3.6.1 Company Overview
- 15.3.6.2 Product Portfolio
- 15.3.7 Nedschroef Machinery
- 15.3.7.1 Company Overview
- 15.3.7.2 Product Portfolio
- 15.3.8 SACMA Limbiate S.p.A.
- 15.3.8.1 Company Overview
- 15.3.8.2 Product Portfolio
- 15.3.9 Sakamura Machine Co. Ltd
- 15.3.9.1 Company Overview
- 15.3.9.2 Product Portfolio
- 15.3.10 Sijin Intelligent Forming Machinery Co. Ltd.
- 15.3.10.1 Company Overview
- 15.3.10.2 Product Portfolio
- 15.3.10.3 Financials
- 15.3.11 Tanisaka Iron Works Co. Ltd.
- 15.3.11.1 Company Overview
- 15.3.11.2 Product Portfolio
- 15.3.12 Wrentham Tool Group
- 15.3.12.1 Company Overview
- 15.3.12.2 Product Portfolio
