기어 모터 시장 규모는 2024년에 250억 6,000만 달러로 평가되었고 2026-2032년에 걸쳐 CAGR 5.93%를 나타내 2032년에는 397억 4,000만 달러에 달할 것으로 예측되고 있습니다.
기어 모터 시장은 풍력 발전 설비의 확대, 기어 모터의 저렴하고 압축된 성질, 기계적 동력 전달의 효능에 대한 우려 증가 등의 요인에 의해 견인되고 있습니다. 시장 보고서는 시장의 전반적인 평가를 설명합니다. 주요 부문, 동향, 시장 성장 촉진요인, 억제요인, 경쟁 구도, 시장에서 중요한 역할을 하는 요인 등을 종합적으로 분석합니다.
세계의 기어 모터 시장 정의
기어 박스가 설치된 전기 모터는 기어 모터라고 불리며, 그 결과 모터의 토크가 증가하고 출력이 증가합니다. 기어 모터는 전기 모터와 기어 박스의 조합을 가리킵니다.
중량물을 이동시키는 경우는 축의 회전수가 낮고 토크 출력이 큰 기어 모터가 사용됩니다. 전체 모터 샤프트를 콤팩트하게 연결할 수 있습니다.
기어드 모터는 용도 및 사양에 따라 모터의 속도와 토크를 조정하기 위해 기계적 기어를 사용합니다. 농업 산업에서는 수확, 잡초 구제, 종자 살포, 관개에 기어 모터가 채용되고 있습니다. 임업은 기본적으로 목재 생산에 기어드 모터를 채용하고 있습니다.
세계의 기어 모터 시장 개요
큰 토크가 필요한 경우, 기어 모터가 사용됩니다. 또, 저속 용도에서는 기존 DC 모터에 대신해, 보다 고속으로 운전할 수 있다고 하는 이점도 있습니다.
기어 모터 시장은 풍력 발전 설비의 확대, 기어 모터의 저렴하고 압축된 성질, 기계적 동력 전달의 유효성에 대한 우려 증가 등의 요인에 의해 견인되고 있습니다. 하지만 매우 비용 효과가 높다고 되어 있습니다. 그 용도의 넓이로부터입니다. 변화하는 주파수 드라이브나 전기 드라이브와 같은 신기술이 시장에 참가해, 널리 사용되게 되면, 기어드 모터는 지보를 굳히고 개선하는 것이 어려워질 가능성이 있습니다.
Gear Motor Market size was valued at USD 25.06 Billion in 2024 and is projected to reach USD 39.74 Billion by 2032, growing at a CAGR of 5.93% from 2026 to 2032.
The market for gear motors is being driven by factors such as expanding wind energy installations, the inexpensive and compressed nature of gear motors, and rising worries over the effectiveness of mechanical power transmission. The Global Gear Motor Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.
Global Gear Motor Market Definition
Electric motors with a gearbox attached to them are called gear motors. As a result, the motor's torque increases, increasing its power. In applications that require a lot of power, such industrial or construction equipment, gear motors are frequently employed. Gear Motor refers to the combination of electric motor and gearbox. A gear box usually consists of a gear motor to limit the speed of the motor's shaft and therefore increase the motor's ability to output torque.
To move heavy objects, gear motors with lower shaft speeds and higher torque output are used. A gear motor is a motor that is constructed using several speed gears. The reduction gear and electric motor are merged into one unit, which also allows for a more compact connection of the motor shaft as a whole. This motor can be severed in a number of different ways, including in a vertical, horizontal, or slanted position. Applying a higher gear ratio will result in a more considerable torque.
Geared motors use mechanical gears to regulate the motor's speed or torque depending on the application and specifications. Direct current (DC) or alternating current (AC) can be used to power geared motors. The agriculture industry adopts gear motors for harvesting, weed control, seed spreading, and irrigation. The Forest Department fundamentally deploys geared motors for producing lumber.
Global Gear Motor Market Overview
When a great amount of torque is needed, gear motors are used. They also replace traditional DC motors in low-speed applications, and they also have the benefit of being able to run at greater speeds. They can operate at very low speeds thanks to the gear reduction, which would be impossible with a straight driveshaft or other arrangements. The main uses for gear motors are in packaging machinery like bottling machines and printing equipment like printers, copiers, and scanners.
The market for gear motors is being driven by factors such as expanding wind energy installations, the inexpensive and compressed nature of gear motors, and rising worries over the effectiveness of mechanical power transmission. Because of their adaptability and cost-effectiveness obtained through modular design, gear motors have gained traction in recent years. Geared motors are considered very cost-effective for power transmission applications, whether mechanical, industrial, or other types. Due to the wide range of applications they have. As new technologies like changing frequency drives and electric drives enter the market and gain widespread usage, geared motors may find it difficult to gain ground and improve. However, with significant investments in research and development, more opportunities are anticipated to arise shortly.
The Global Gear Motor Market is segmented on the basis of Gear Type, Industry, and Geography.
Based on Gear Type, the market is bifurcated into Helical Gear Motors, Planetary Gear Motors, Helical-Bevel Gear Motors, Worm Gear Motors, and Others. Planetary gears are expected to constitute the fastest-growing segment in the market. The demand for helical gear motors is more eminent than that of other gear models. Helical gear motors are anticipated to hold the largest share of the total Gear Motor Market. These motors are predicted to dominate the market during the estimated period.
Based on Industry, the market is bifurcated into Construction, Marine, Material Handling, Metals and Mining, Automotive, and Others. The wind power and material handling industries are anticipated to be the fastest-growing segments in the Gear Motor Market during the calculated period.
The "Global Gear Motor Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are Eaton Corporation PLC, Bauer Gear Motor, SEW-Eurodrive, Sumitomo Drive Technologies, Siemens AG, BFT Automation U.K. Ltd., Baldor Electric Company, and others.
Our market analysis includes a section specifically devoted to such major players, where our analysts give an overview of each player's financial statements, along with product benchmarking and SWOT analysis. Key development strategies, market share analysis, and market positioning analysis of the aforementioned players globally are also included in the competitive landscape section.