역률 개선(PFC) 시장은 예측기간 중(2024-2032년) 약 5.2%라는 큰 성장률이 예상됩니다. 이 시장의 성장에 기여하는 요인은 데이터센터, 제조업 등 최종 사용자 부문의 올바른 전력 공급에 대한 잠재적인 수요입니다. 지난 몇 년동안 IoT에 대한 지출은 지수적으로 증가하고 있으며, 로트 연결된 장치 및 기타 컴퓨터 시스템의 수가 증가하고 있습니다. 2024년 말까지 예상되는 IoT에 대한 지출액은 약 1조 달러에 달할 전망입니다. 게다가 2021년에는 IT 데이터센터에 대한 지출은 2,400억 달러에 달할 것으로 추정됩니다.
무효 전력에 따라 시장은 0-200KVAR, 200-500KVAR, 500-1500KVAR, 1500KVAR 이상으로 구분됩니다. 0-200KVAR 부문이 시장에서 가장 큰 점유율을 차지하는 이유는 이 유형이 저중압 산업용, 상업용, 가정용 모든 용도에 일반적으로 적용될 수 있기 때문입니다. 구체적으로는, 이러한 설비는 저-중기 전력 요구사항 범위를 가지며, 이러한 설정에서 근본적인 변경을 받지 않고 에너지 효율 수준 향상을 위해 적응하는 기업에 이상적일 수 있습니다. 게다가 이 범위의 PFC 시스템에 대해서는 에너지 삭감의 비용에 관한 연동 사실과 효율적인 에너지·인-시스템에 대한 산업계의 관심을 높이는 대응 규정 덕분에 안정된 수요가 전망됩니다.
유형별로 볼 때 시장은 고정식과 자동식으로 구분됩니다. 2023년에는 고정식 부문이 전체 시장을 지배했습니다. 자동 부문 역률 개선(PFC) 시장은 실시간 효율성으로 최대 시장 점유율을 차지할 것으로 예상됩니다. 이 유형에 따르면, 다양한 부하 조건에 대한 독립적인 자동 PFC 시스템은 운영자 없이 변경되므로 때때로 변동하는 전력 요구를 가진 산업 및 상업시설에 적합해야 합니다. 동시에 소비 전력, 총 러닝 비용, 저역률로 인한 페널티 가능성을 줄일 수 있습니다. 따라서 사업자가 에너지 사용의 신뢰성과 효율성을 강조하기 시작했기 때문에 이러한 수요가 높아지고 있습니다.
판매 채널에 따라 시장은 대행사와 OEM 직접 판매으로 구분됩니다. 2023년 전체 시장에서는 유통업체 부문이 우위를 차지했습니다. 비용 최적화와 함께 효율적인 에너지 관리를 필요로 하는 기업이 늘어나고 있기 때문에 향후 개발될 PFC 제품의 제조에 있어서의 리셀러의 역할과 입장은 매우 중요하게 될 것입니다. 기술적 측면 및 기타 제품과 관련하여 다양한 시장에서 지원을 계속 확장할 수 있다는 사실이 유통업체를 뒷받침하고 있습니다. 또한 산업 및 상업 부문에서의 활동 증가는 효과적인 유통망 실현에 압박을 가해 유통업체의 PFC 시장 부문의 성장을 가속하고 있습니다.
역률 개선 시장의 채용을 보다 잘 이해하기 위해 시장은 북미(미국, 캐나다, 기타 북미), 유럽(독일, 프랑스, 영국, 스페인, 이탈리아, 기타 유럽), 아시아태평양(중국, 일본, 인도 및 기타 아시아태평양), 세계 기타 지역에서 세계의 존재에 따라 분석됩니다. 아시아태평양은 예측 기간 동안 높은 CAGR로 성장할 것으로 예상됩니다. 중국, 인도, 동남아시아, 기타 아시아 국가들에서는, 산업화 및 도시화가 급속히 진행되고 있으며 에너지 소비 수요가 높아지고 있기 때문에 효율적인 에너지 관리 솔루션이 필요합니다. 따라서 이 지역에서는 첨단 에너지 효율 및 인증 저탄소 제품을 장려하는 정부의 인센티브 등의 모든 관행은 PFC 시스템의 채용에 기여하는 요인이 되고 있습니다. 또한 인프라의 고도화와 송전망의 근대화에 대한 투자도 아시아태평양에서의 PFC 기술 시장의 성장 기회를 창출하고 있어 시장 전체 성장을 이끌고 있습니다.
시장에 진출하는 주요 기업으로는 Schneider Electric, Eaton, GE Vernova, AB, Hitachi Group, Gentec-eo, TCI, Powerside, Cos Phi, and Controliix. 등이 있습니다.
Various factors like the enhanced global energy consumption brought about by the advancement of industrialization besides urbanization, are putting pressure on the power grids. This makes PFC one of the most essential systems for industries since it mainly deals with the optimization of energy and reduction of power loss and the cost of electricity. Moreover, greater regulatory measures on energy effectiveness also depict that due to the increase of global sustainable pressures, companies must use PFC technologies to enrich their energy administration and correspond to the required environmental standards.
The Power Factor Correction Market is expected to grow at a significant rate of around 5.2% during the forecast period (2024-2032). The factors that help in the growth of this market is the potential demand for correct power supply from the end user sectors like data centers, manufacturing, and other sectors in the past couple of years the spending on IoT has increased exponentially, the number of lots connected devices and other computer systems also have increased. The projected spending on lots by the end of 2024 is expected to reach around USD 1 Trillion. Moreover, in the year 2021, the spending on IT data centers was estimated to be close to USD 240 Billion.
Based on the reactive power, the market has been segmented into 0-200 KVAR, 200-500 KVAR, 500-1500 KVAR, and Above 1500 KVAR. The 0-200 KVAR segment accounted for the largest share of the market because this type can be generally applied to practically any low-medium voltage industrial, commercial, and household applications. Specifically, these are the facilities that have lower to midterm power requirements ranges and may be ideal for the firms to adapt towards their increased energy efficiency levels without having to undergo fundamental changes in such a setup. Furthermore, for the PFC systems within this range, there will be a steady demand thanks to conjunction facts regarding the cost of energy-cutting and corresponding stipulations in raising concern with the industries for efficient energy in systems.
Based on type, the market has been segmented into fixed and automatic. The fixed segment dominated the overall market in 2023. The Power Factor Correction (PFC) Market in the automatic segment is expected to hold the largest market share due to its real-time efficiency. According to this type, the independent automatic PFC system to various load conditions is changed without the operator, so it needs to be well suited to industries and commercial facilities with occasionally fluctuating power needs. It does this while at the same time slashing energy consumption, total running expenses, and the likelihood of penalties arising out of the low power factor. Therefore, this demand is increased because business operators are starting to attach importance to the reliability and efficiency of energy usage.
Based on sales channel, the market has been segmented into distributors, and OEM direct. The distributors segment dominated the overall market in 2023. The increasing numbers of businesses require efficient energy management in combination with cost optimization, the role and position of the distributor in making the PFC products that are to be developed will be thus very pivotal. The fact that they continue to be capable of extending their support in different markets in terms of technical aspects, and other products puts them up. Moreover, heightened activity in the industrial and commerce sectors is putting pressure on achieving effective distribution networks that in turn are fostering growth in the PFC market segment of distributors
For a better understanding of the market adoption of the power factor correction market, the market is analyzed based on its worldwide presence in countries such as North America (U.S., Canada, and the Rest of North America), Europe (Germany, France, U.K., Spain, Italy, Rest of Europe), Asia-Pacific (China, Japan, India, Rest of Asia-Pacific), Rest of World. Asia Pacific is expected to grow with a significant CAGR during the forecast period. Fast-growing industrialization and urbanization in countries like China, India Southeast Asia, and other Asian countries puts higher demand for energy consumption and therefore a need for efficient energy management solutions. Thus, practices such as government incentives encouraging advanced energy efficiency and certified low-carbon products in the region are also factors contributing to the adoption of PFC systems. Further, the advancement of the infrastructure and investment in grid modernization are also creating opportunities for the PFC technologies market growth in the Asia Pacific region which will let it lead the overall market growth.
Some of the major players operating in the market include Schneider Electric, Eaton, GE Vernova, AB, Hitachi Group, Gentec-eo, TCI, Powerside, Cos Phi, and Controliix.