한글목차

플라스틱 사출 성형 세계 시장은 2024년 132억 달러로 평가되며, 2030년에는 168억 달러로 연평균 3.9%로 성장할 것으로 예상됩니다.

포장, 자동차, 헬스케어, 가전, 건설 등의 분야에서의 수요가 시장 확대에 크게 기여하고 있습니다. 포장 분야에서는 식품, 식음료, 제약 산업에서 플라스틱 용기 및 필름이 널리 사용되고 있는 것이 주요 성장 요인으로 작용하고 있습니다. 자동차 산업에서는 연비 향상과 배기가스 규제 준수를 위해 경량 플라스틱 부품의 채택이 증가하고 있습니다. 의료 분야에서는 무균 일회용 플라스틱 기기에 대한 의존도가 높아지면서 시장 성장에 더욱 기여하고 있습니다. 소비자 전자제품은 사출 성형을 통한 소형 부품의 제조 정밀도의 혜택을 누리고 있으며, 건설 부문에서는 플라스틱 기반 피팅 및 단열재 사용이 증가하고 있습니다. 자동화, AI 통합, 3D 프린팅과 같은 기술 혁신은 생산을 간소화하고, 지속가능성에 대한 노력은 생분해성 플라스틱과 재생 플라스틱의 채택을 촉진하여 시장의 세계 성장 궤도를 확고히 하고 있습니다.

시장 촉진요인

포장 및 소비재 산업의 수요 증가

주요 시장 과제

환경문제에 대한 우려와 플라스틱 사용에 대한 엄격한 규제 강화

주요 시장 동향

지속가능하고 재활용 가능한 플라스틱의 채택 증가

목차

제1장 개요

제2장 조사 방법

제3장 주요 요약

제4장 고객의 소리

제5장 세계의 플라스틱 사출 성형 시장 전망

• 시장 규모 및 예측
  • 금액별
• 시장 점유율과 예측
  • 원재료별(폴리프로필렌, 아크릴로니트릴 부타디엔 스티렌(ABS), 폴리스티렌, 폴리에틸렌, 폴리염화비닐(PVC), 폴리카보네이트, 폴리아미드, 기타)
  • 용도별(포장, 건축·건설, 소비재, 전자기기, 자동차·운송, 헬스케어, 기타)
  • 지역별(북미, 유럽, 남미, 중동 및 아프리카, 아시아태평양)
• 기업별(2024년)
• 시장 맵

제6장 북미의 플라스틱 사출 성형 시장 전망

• 시장 규모 및 예측
• 시장 점유율과 예측
• 북미 : 국가별 분석
  • 미국
  • 캐나다
  • 멕시코

제7장 유럽의 플라스틱 사출 성형 시장 전망

• 시장 규모 및 예측
• 시장 점유율과 예측
• 유럽 : 국가별 분석
  • 독일
  • 프랑스
  • 영국
  • 이탈리아
  • 스페인

제8장 아시아태평양의 플라스틱 사출 성형 시장 전망

• 시장 규모 및 예측
• 시장 점유율과 예측
• 아시아태평양 : 국가별 분석
  • 중국
  • 인도
  • 일본
  • 한국
  • 호주

제9장 중동 및 아프리카의 플라스틱 사출 성형 시장 전망

• 시장 규모 및 예측
• 시장 점유율과 예측
• 중동 및 아프리카 : 국가별 분석
  • 사우디아라비아
  • 아랍에미리트
  • 남아프리카공화국

제10장 남미의 플라스틱 사출 성형 시장 전망

• 시장 규모 및 예측
• 시장 점유율과 예측
• 남미 : 국가별 분석
  • 브라질
  • 콜롬비아
  • 아르헨티나

제11장 시장 역학

• 성장 촉진요인
• 과제

제12장 시장 동향과 발전

• 인수합병
• 제품 출시
• 최근 동향

제13장 기업 개요

• Magna International Inc.
• Toshiba Corporation
• DOW Inc.
• LyondellBasell Industries N.V.
• HTI Plastics, Inc.
• DuPont de Nemours, Inc.
• Valder Kunststoffverarbeitungs GmbH
• Huntsman Corporation
• Coastal Plastic Molding Inc.
• BASF SE

제14장 전략적 제안

제15장 조사 회사 소개 및 면책사항

영문목차

The Global Plastic Injection Moulding Market was valued at USD 13.2 billion in 2024 and is projected to reach USD 16.8 billion by 2030, growing at a CAGR of 3.9%. This market's expansion is largely fueled by demand from sectors such as packaging, automotive, healthcare, consumer electronics, and construction. In packaging, the widespread use of plastic containers and films in food, beverage, and pharmaceutical industries is a key growth driver. The automotive industry increasingly adopts lightweight plastic parts to enhance fuel efficiency and comply with emission standards. The medical sector's growing reliance on sterile, single-use plastic devices further contributes to market momentum. Consumer electronics benefit from injection moulding's precision in producing compact components, while the construction sector sees rising usage in plastic-based fittings and insulation. Technological innovations like automation, AI integration, and 3D printing have streamlined production, while sustainability initiatives are pushing the adoption of biodegradable and recycled plastics, solidifying the market's global growth trajectory.

Key Market Drivers

Rising Demand from Packaging and Consumer Goods Industries

The packaging sector stands as a major driver of the plastic injection moulding market, driven by the need for cost-effective, lightweight, and durable materials. This technology is extensively used for manufacturing bottles, containers, films, and pouches across various industries. The food and beverage segment, in particular, demands solutions that ensure product longevity, tamper-resistance, and environmental compliance. Similarly, the pharmaceutical sector relies on precise and sterile packaging for products like syringes and vials. The growing e-commerce industry further amplifies demand for protective and lightweight packaging suited for efficient logistics. Customization and visual appeal in packaging also play a vital role in boosting adoption.

In parallel, the consumer goods segment significantly supports market growth through its demand for robust, visually appealing, and economically produced plastic items in categories such as household products, toys, and personal care. Injection moulding is preferred for its high-volume capacity, detailed designs, and minimal material waste. Moreover, the shift towards recyclable and biodegradable plastics in packaging aligns with evolving environmental regulations and sustainability goals.

Key Market Challenges

Environmental Concerns and Stringent Regulations on Plastic Usage

Environmental sustainability poses a key challenge for the global plastic injection moulding market. The increasing concerns about plastic waste and its ecological impact have prompted governments worldwide to implement stricter regulations targeting single-use plastics and promoting recycling. Policies like the EU's Single-Use Plastics Directive and the U.S. Plastics Pact are pushing the industry to transition toward eco-friendly practices.

Manufacturers are under growing pressure to incorporate recycled or biodegradable materials, which often present issues such as higher production costs, inconsistent quality, and limited availability. Additionally, some biodegradable plastics require specialized processing environments, complicating integration into standard operations. Compliance with these evolving standards often necessitates significant financial investment, including retooling production lines, upgrading equipment, and workforce training. These adaptations, while essential for environmental compliance, can strain operational efficiency and increase the cost burden, especially for small and medium-sized enterprises.

Key Market Trends

Increasing Adoption of Sustainable and Recyclable Plastics

The push for environmental sustainability is a defining trend in the plastic injection moulding market, with a notable shift toward using recyclable, biodegradable, and bio-based plastics. Rising global awareness about pollution and regulatory pressure are prompting manufacturers to reduce their reliance on traditional petroleum-based plastics.

Companies are investing in bioplastics made from renewable sources such as corn starch and sugarcane, which offer functional parity with conventional plastics while breaking down more efficiently in the environment. Furthermore, advancements in recycling technologies are allowing greater reuse of plastic waste, particularly through the integration of post-consumer recycled and ocean-bound plastics. These materials are gaining traction across various industries, including packaging, automotive, and electronics, not only for their sustainability benefits but also as a response to growing consumer demand for environmentally responsible products.

Key Market Players

• Magna International Inc.
• Toshiba Corporation
• DOW Inc.
• LyondellBasell Industries N.V.
• HTI Plastics, Inc.
• DuPont de Nemours, Inc.
• Valder Kunststoffverarbeitungs GmbH
• Huntsman Corporation
• Coastal Plastic Molding Inc.
• BASF SE

Report Scope:

In this report, the Global Plastic Injection Moulding Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

Plastic Injection Moulding Market, By Raw Material Type:

• Polypropylene
• Acrylonitrile Butadiene Styrene (ABS)
• Polystyrene
• Polyethylene
• Polyvinyl Chloride (PVC)
• Polycarbonate
• Polyamide
• Other

Plastic Injection Moulding Market, By Application:

• Packaging
• Building and Construction
• Consumer Goods
• Electronics
• Automotive and Transportation
• Healthcare
• Other

Plastic Injection Moulding Market, By Region:

• North America
  • United States
  • Canada
  • Mexico
• Europe
  • Germany
  • France
  • United Kingdom
  • Italy
  • Spain
• Asia Pacific
  • China
  • India
  • Japan
  • South Korea
  • Australia
• South America
  • Brazil
  • Colombia
  • Argentina
• Middle East & Africa
  • Saudi Arabia
  • UAE
  • South Africa

Competitive Landscape

Company Profiles: Detailed analysis of the major companies present in the Global Plastic Injection Moulding Market.

Available Customizations:

Global Plastic Injection Moulding Market report with the given market data, TechSci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional market players (up to five).

Table of Contents

1. Product Overview

• 1.1. Market Definition
• 1.2. Scope of the Market
  • 1.2.1. Markets Covered
  • 1.2.2. Years Considered for Study
  • 1.2.3. Key Market Segmentations

2. Research Methodology

• 2.1. Objective of the Study
• 2.2. Baseline Methodology
• 2.3. Key Industry Partners
• 2.4. Major Association and Secondary Sources
• 2.5. Forecasting Methodology
• 2.6. Data Triangulation & Validation
• 2.7. Assumptions and Limitations

3. Executive Summary

• 3.1. Overview of the Market
• 3.2. Overview of Key Market Segmentations
• 3.3. Overview of Key Market Players
• 3.4. Overview of Key Regions/Countries
• 3.5. Overview of Market Drivers, Challenges, and Trends

4. Voice of Customer

5. Global Plastic Injection Moulding Market Outlook

• 5.1. Market Size & Forecast
  • 5.1.1. By Value
• 5.2. Market Share & Forecast
  • 5.2.1. By Raw Material Type (Polypropylene, Acrylonitrile Butadiene Styrene (ABS), Polystyrene, Polyethylene, Polyvinyl Chloride (PVC), Polycarbonate, Polyamide, Other)
  • 5.2.2. By Application (Packaging, Building and Construction, Consumer Goods, Electronics, Automotive and Transportation, Healthcare, Other)
  • 5.2.3. By Region (North America, Europe, South America, Middle East & Africa, Asia Pacific)
• 5.3. By Company (2024)
• 5.4. Market Map

6. North America Plastic Injection Moulding Market Outlook

• 6.1. Market Size & Forecast
  • 6.1.1. By Value
• 6.2. Market Share & Forecast
  • 6.2.1. By Raw Material Type
  • 6.2.2. By Application
  • 6.2.3. By Country
• 6.3. North America: Country Analysis
  • 6.3.1. United States Plastic Injection Moulding Market Outlook
    • 6.3.1.1. Market Size & Forecast
      • 6.3.1.1.1. By Value
    • 6.3.1.2. Market Share & Forecast
      • 6.3.1.2.1. By Raw Material Type
      • 6.3.1.2.2. By Application
  • 6.3.2. Canada Plastic Injection Moulding Market Outlook
    • 6.3.2.1. Market Size & Forecast
      • 6.3.2.1.1. By Value
    • 6.3.2.2. Market Share & Forecast
      • 6.3.2.2.1. By Raw Material Type
      • 6.3.2.2.2. By Application
  • 6.3.3. Mexico Plastic Injection Moulding Market Outlook
    • 6.3.3.1. Market Size & Forecast
      • 6.3.3.1.1. By Value
    • 6.3.3.2. Market Share & Forecast
      • 6.3.3.2.1. By Raw Material Type
      • 6.3.3.2.2. By Application

7. Europe Plastic Injection Moulding Market Outlook

• 7.1. Market Size & Forecast
  • 7.1.1. By Value
• 7.2. Market Share & Forecast
  • 7.2.1. By Raw Material Type
  • 7.2.2. By Application
  • 7.2.3. By Country
• 7.3. Europe: Country Analysis
  • 7.3.1. Germany Plastic Injection Moulding Market Outlook
    • 7.3.1.1. Market Size & Forecast
      • 7.3.1.1.1. By Value
    • 7.3.1.2. Market Share & Forecast
      • 7.3.1.2.1. By Raw Material Type
      • 7.3.1.2.2. By Application
  • 7.3.2. France Plastic Injection Moulding Market Outlook
    • 7.3.2.1. Market Size & Forecast
      • 7.3.2.1.1. By Value
    • 7.3.2.2. Market Share & Forecast
      • 7.3.2.2.1. By Raw Material Type
      • 7.3.2.2.2. By Application
  • 7.3.3. United Kingdom Plastic Injection Moulding Market Outlook
    • 7.3.3.1. Market Size & Forecast
      • 7.3.3.1.1. By Value
    • 7.3.3.2. Market Share & Forecast
      • 7.3.3.2.1. By Raw Material Type
      • 7.3.3.2.2. By Application
  • 7.3.4. Italy Plastic Injection Moulding Market Outlook
    • 7.3.4.1. Market Size & Forecast
      • 7.3.4.1.1. By Value
    • 7.3.4.2. Market Share & Forecast
      • 7.3.4.2.1. By Raw Material Type
      • 7.3.4.2.2. By Application
  • 7.3.5. Spain Plastic Injection Moulding Market Outlook
    • 7.3.5.1. Market Size & Forecast
      • 7.3.5.1.1. By Value
    • 7.3.5.2. Market Share & Forecast
      • 7.3.5.2.1. By Raw Material Type
      • 7.3.5.2.2. By Application

8. Asia Pacific Plastic Injection Moulding Market Outlook

• 8.1. Market Size & Forecast
  • 8.1.1. By Value
• 8.2. Market Share & Forecast
  • 8.2.1. By Raw Material Type
  • 8.2.2. By Application
  • 8.2.3. By Country
• 8.3. Asia Pacific: Country Analysis
  • 8.3.1. China Plastic Injection Moulding Market Outlook
    • 8.3.1.1. Market Size & Forecast
      • 8.3.1.1.1. By Value
    • 8.3.1.2. Market Share & Forecast
      • 8.3.1.2.1. By Raw Material Type
      • 8.3.1.2.2. By Application
  • 8.3.2. India Plastic Injection Moulding Market Outlook
    • 8.3.2.1. Market Size & Forecast
      • 8.3.2.1.1. By Value
    • 8.3.2.2. Market Share & Forecast
      • 8.3.2.2.1. By Raw Material Type
      • 8.3.2.2.2. By Application
  • 8.3.3. Japan Plastic Injection Moulding Market Outlook
    • 8.3.3.1. Market Size & Forecast
      • 8.3.3.1.1. By Value
    • 8.3.3.2. Market Share & Forecast
      • 8.3.3.2.1. By Raw Material Type
      • 8.3.3.2.2. By Application
  • 8.3.4. South Korea Plastic Injection Moulding Market Outlook
    • 8.3.4.1. Market Size & Forecast
      • 8.3.4.1.1. By Value
    • 8.3.4.2. Market Share & Forecast
      • 8.3.4.2.1. By Raw Material Type
      • 8.3.4.2.2. By Application
  • 8.3.5. Australia Plastic Injection Moulding Market Outlook
    • 8.3.5.1. Market Size & Forecast
      • 8.3.5.1.1. By Value
    • 8.3.5.2. Market Share & Forecast
      • 8.3.5.2.1. By Raw Material Type
      • 8.3.5.2.2. By Application

9. Middle East & Africa Plastic Injection Moulding Market Outlook

• 9.1. Market Size & Forecast
  • 9.1.1. By Value
• 9.2. Market Share & Forecast
  • 9.2.1. By Raw Material Type
  • 9.2.2. By Application
  • 9.2.3. By Country
• 9.3. Middle East & Africa: Country Analysis
  • 9.3.1. Saudi Arabia Plastic Injection Moulding Market Outlook
    • 9.3.1.1. Market Size & Forecast
      • 9.3.1.1.1. By Value
    • 9.3.1.2. Market Share & Forecast
      • 9.3.1.2.1. By Raw Material Type
      • 9.3.1.2.2. By Application
  • 9.3.2. UAE Plastic Injection Moulding Market Outlook
    • 9.3.2.1. Market Size & Forecast
      • 9.3.2.1.1. By Value
    • 9.3.2.2. Market Share & Forecast
      • 9.3.2.2.1. By Raw Material Type
      • 9.3.2.2.2. By Application
  • 9.3.3. South Africa Plastic Injection Moulding Market Outlook
    • 9.3.3.1. Market Size & Forecast
      • 9.3.3.1.1. By Value
    • 9.3.3.2. Market Share & Forecast
      • 9.3.3.2.1. By Raw Material Type
      • 9.3.3.2.2. By Application

10. South America Plastic Injection Moulding Market Outlook

• 10.1. Market Size & Forecast
  • 10.1.1. By Value
• 10.2. Market Share & Forecast
  • 10.2.1. By Raw Material Type
  • 10.2.2. By Application
  • 10.2.3. By Country
• 10.3. South America: Country Analysis
  • 10.3.1. Brazil Plastic Injection Moulding Market Outlook
    • 10.3.1.1. Market Size & Forecast
      • 10.3.1.1.1. By Value
    • 10.3.1.2. Market Share & Forecast
      • 10.3.1.2.1. By Raw Material Type
      • 10.3.1.2.2. By Application
  • 10.3.2. Colombia Plastic Injection Moulding Market Outlook
    • 10.3.2.1. Market Size & Forecast
      • 10.3.2.1.1. By Value
    • 10.3.2.2. Market Share & Forecast
      • 10.3.2.2.1. By Raw Material Type
      • 10.3.2.2.2. By Application
  • 10.3.3. Argentina Plastic Injection Moulding Market Outlook
    • 10.3.3.1. Market Size & Forecast
      • 10.3.3.1.1. By Value
    • 10.3.3.2. Market Share & Forecast
      • 10.3.3.2.1. By Raw Material Type
      • 10.3.3.2.2. By Application

11. Market Dynamics

• 11.1. Drivers
• 11.2. Challenges

12. Market Trends and Developments

• 12.1. Merger & Acquisition (If Any)
• 12.2. Product Launches (If Any)
• 12.3. Recent Developments

13. Company Profiles

• 13.1. Magna International Inc.
  • 13.1.1. Business Overview
  • 13.1.2. Key Revenue and Financials
  • 13.1.3. Recent Developments
  • 13.1.4. Key Personnel
  • 13.1.5. Key Product/Services Offered
• 13.2. Toshiba Corporation
• 13.3. DOW Inc.
• 13.4. LyondellBasell Industries N.V.
• 13.5. HTI Plastics, Inc.
• 13.6. DuPont de Nemours, Inc.
• 13.7. Valder Kunststoffverarbeitungs GmbH
• 13.8. Huntsman Corporation
• 13.9. Coastal Plastic Molding Inc.
• 13.10. BASF SE

14. Strategic Recommendations

15. About Us & Disclaimer