세계의 자동차용 전동 액추에이터 시장 예측(-2032년) : 유형별, 차량 유형별, 동작 유형별, 전압 범위별, 재료 유형별, 판매 채널별, 지역별 분석
Automotive Electric Actuator Market Forecasts to 2032 - Global Analysis By Type, Vehicle Type, Motion Type, Voltage Range, Material Type, Sales Channel and By Geography
상품코드 : 1818015
리서치사 : Stratistics Market Research Consulting
발행일 : 2025년 09월
페이지 정보 : 영문 200+ Pages
 라이선스 & 가격 (부가세 별도)
US $ 4,150 ₩ 5,979,000
PDF (Single User License) help
PDF 보고서를 1명만 이용할 수 있는 라이선스입니다. 인쇄 가능하며 인쇄물의 이용 범위는 PDF 이용 범위와 동일합니다.
US $ 5,250 ₩ 7,564,000
PDF (2-5 User License) help
PDF 보고서를 동일 사업장에서 5명까지 이용할 수 있는 라이선스입니다. 인쇄는 5회까지 가능하며 인쇄물의 이용 범위는 PDF 이용 범위와 동일합니다.
US $ 6,350 ₩ 9,149,000
PDF & Excel (Site License) help
PDF 및 Excel 보고서를 동일 사업장의 모든 분이 이용할 수 있는 라이선스입니다. 인쇄는 5회까지 가능합니다. 인쇄물의 이용 범위는 PDF 및 Excel 이용 범위와 동일합니다.
US $ 7,500 ₩ 10,806,000
PDF & Excel (Global Site License) help
PDF 및 Excel 보고서를 동일 기업의 모든 분이 이용할 수 있는 라이선스입니다. 인쇄는 10회까지 가능하며 인쇄물의 이용 범위는 PDF 이용 범위와 동일합니다.


한글목차

Stratistics MRC에 따르면 세계의 자동차용 전동 액추에이터 시장은 2025년에 277억 달러를 차지하고 예측 기간 동안 CAGR 8.1%를 나타내며 2032년에는 479억 달러에 이를 전망입니다. 자동차용 전동 액추에이터는 전기 에너지를 기계적 움직임으로 변환하여 다양한 기능을 제어하는 현대 자동차에 필수적인 구성 요소입니다. 스로틀 제어, 가변 밸브 타이밍, 터보차저 작동, HVAC 시스템, 파워시트, 브레이크 기구 등의 프로세스를 자동화함으로써 자동차의 효율성, 안전성, 쾌적성을 높이는데 중요한 역할을 하고 있습니다. 기존의 유압식 및 공압식 액추에이터와 달리 전동 액추에이터는 고정밀도, 고속 응답, 저 배출 가스 및 에너지 소비를 줄여줍니다.

자동차용 전동화 및 배출가스 규제

자동차의 전동화가 진행되고 있으며, 파워트레인이나 섀시의 용도에 있어서 컴팩트하고 에너지 효율적인 액추에이션 시스템에 대한 수요가 높아지고 있습니다. 규제의 의무화는 기계식에서 전자 제어 메커니즘으로의 전환을 강화하고 있습니다. 또한 경량 소재와 모듈식 통합 전략이 채용을 뒷받침하고 있습니다. 업계 전반에서 지속가능성이 강조되어 전동 액추에이터의 전략적 중요성이 높아지고 있습니다. 설계와 성능의 지속적인 혁신은 차세대 이동성 플랫폼에서 액추에이터의 역할을 강화하고 있습니다.

차량 시스템과의 복잡한 통합

다양한 차량 플랫폼에서는 맞춤형 액추에이터 설계가 필요하며 개발 시간과 비용이 증가합니다. 전자 제어 장치(ECU) 및 센서 네트워크와의 동기화에는 높은 정밀도와 견고한 소프트웨어 지원이 필요합니다. 레거시 시스템에 대한 개조는 엔지니어링 오버헤드를 더욱 늘립니다. 소규모 공급업체는 세계 표준 표준의 검증 및 규정 준수에 어려움을 겪을 수 있습니다. 이러한 제약은 비용 중시의 소량 생산 분야에서의 채용을 늦추고 있습니다.

에너지 효율과 환경상의 이점

회생 브레이크, 능동형 냉각, 열 관리 시스템의 용도가 확대되고 그 기능적 관련성이 확산되고 있습니다. 재료와 임베디드 제어 알고리즘의 발전으로 전체 플랫폼의 성능 기준이 향상되었습니다. OEM의 투자는 발전하는 지속가능성과 에너지 목표를 충족시키기 위해 개발을 가속화하고 있습니다. 전동화된 드라이브 트레인과 스마트 차량 아키텍처와의 통합은 시장의 잠재력을 강화하고 있습니다. 이러한 요인들은 종합적으로 자동차용 전동 액추에이터 시장의 장기 성장에 대한 강력한 궤도를 형성하고 있습니다.

대체 액추에이터 기술을 통한 위협

적응성이 있는 다기능 액추에이터를 필요로 하는 자율주행차 플랫폼에서 채용이 진행되고 있습니다. OEM 개발 파이프라인은 비용과 성능을 절충하고 통합의 실현 가능성을 개발하고 있습니다. 표준화된 프로토콜이 없고, 장기적인 검증 데이터가 한정되어 있는 것이, 보급의 장벽이 되고 있습니다. 시장의 단편화와 기술적 불확실성은 부품 조달의 전략적 결정에 영향을 미칩니다. 이러한 경쟁으로부터의 압력은 전동 액추에이터의 미래 시장 역학을 재구성하고 있습니다.

COVID-19의 영향

COVID-19의 대유행으로 자동차용 전동 액추에이터 시장은 생산 중단, 공급망 지연, 잠금 및 이동 제한으로 인한 자동차 판매 감소 등 큰 혼란을 겪었습니다. 제조업체는 원재료 및 부품 부족에 직면하여 생산 능력에 영향을 미쳤습니다. 개인 소비가 감소함에 따라 신차 수요도 줄어들었습니다. 그러나 규제가 완화됨에 따라 전기자동차와 첨단자동차기술의 채용이 진행됨에 따라 시장은 회복으로 돌아왔습니다. 팬데믹은 업계 공급망 회복력과 디지털 변혁 가속의 필요성을 돋보이게 했습니다.

예측 기간 동안 스로틀 액추에이터 부문이 최대가 될 것으로 예상

스로틀 액추에이터 부문은 엔진 성능 조정에 필수적인 역할을 하기 때문에 예측 기간 동안 최대 시장 점유율을 차지할 것으로 예측됩니다. 이 시스템은 공기 흐름과 연료 공급을 관리하고 배기 가스 컴플라이언스와 운전 효율을 지원합니다. 전자제어장치과의 통합은 응답성을 향상시킵니다. 수요는 내연차, 하이브리드 자동차, 전기자동차에 걸쳐 있습니다. 제조업체는 정확성과 내구성을 위해 설계를 최적화합니다. 이 부문은 차량 역학의 핵심 기능이기 때문에 앞으로도 계속 이어질 것입니다.

예측 기간 동안 폴리머 부문이 가장 높은 CAGR을 나타낼 것으로 예상

예측 기간 동안 가볍고 비용 효율적인 재료에 대한 수요로 인해 고분자 부문이 가장 높은 성장률을 보일 것으로 예측됩니다. 기어, 하우징 및 링키지에 사용하면 차량 중량을 줄이고 연비를 향상시킬 수 있습니다. 재료의 혁신으로 내열성과 내구성이 뛰어난 설계가 가능해지고 있습니다. OEM은 지속가능성과 재활용성 목표를 달성하기 위해 폴리머를 채택합니다. 스마트 시스템과의 통합으로 응용 범위가 확대되고 있습니다. 경량화가 설계의 우선순위가 됨에 따라 이 분야는 급성장할 것으로 보입니다.

최대 점유율을 차지하는 지역

예측 기간 동안 북미는 선진 자동차 기술과 주요 자동차 제조업체의 강한 존재감으로 최대 시장 점유율을 차지할 것으로 예측됩니다. 이 지역은 자율 주행, 연비 효율, 배기 가스 규제의 혁신에 중점을 둡니다. 전기자동차와 하이브리드 자동차에 대한 소비자의 선호도 증가는 용도, HVAC 및 안전 시스템에 걸친 액추에이터 수요를 촉진합니다. 배출가스에 대한 정부의 엄격한 규제와 커넥티드 차량에 대한 투자 증가는 더욱 채용을 촉진합니다. 또한 스마트기능과 운전지원기술의 통합으로 작고 에너지 효율적인 액추에이터 사용이 가속화되고 있습니다. 경쟁 구도은 제휴, 제품 혁신, 애프터마켓 서비스의 확대에 의해 형성됩니다.

가장 높은 CAGR을 나타내는 지역

예측 기간 동안 자동차 생산 증가와 가처분 소득 증가로 아시아태평양이 가장 높은 CAGR을 나타낼 것으로 전망됩니다. 이 지역은 소형?중형 승용차의 거점이며, 쾌적성과 안전성을 향상시키기 위해서 액추에이터가 널리 채용되고 있습니다. 특히 중국, 일본, 한국에서는 전기차 채용이 확대되고 있으며 수요를 더욱 밀어 올리고 있습니다. 비용 효율적인 제조 능력과 더 깨끗한 이동성에 대한 정부 인센티브가 시장을 강화하고 있습니다. 자동차의 첨단 전자 제품 통합의 향상은 스로틀, 브레이크 및 시트 시스템에서 액추에이터의 사용을 지원합니다. 현지 공급업체와 세계 기업이 적극적으로 거점을 확장하고 매우 역동적이고 경쟁 환경을 형성하고 있습니다.

무료 맞춤형 서비스

이 보고서를 구독하는 고객은 다음 무료 맞춤설정 옵션 중 하나를 사용할 수 있습니다.

목차

제1장 주요 요약

제2장 서문

제3장 시장 동향 분석

제4장 Porter's Five Forces 분석

제5장 세계의 자동차용 전동 액추에이터 시장 : 유형별

제6장 세계의 자동차용 전동 액추에이터 시장 : 차량 유형별

제7장 세계의 자동차용 전동 액추에이터 시장 : 동작 유형별

제8장 세계의 자동차용 전동 액추에이터 시장 : 전압 범위별

제9장 세계의 자동차용 전동 액추에이터 시장 : 재료 유형별

제10장 세계의 자동차용 전동 액추에이터 시장 : 판매 채널별

제11장 세계의 자동차용 전동 액추에이터 시장 : 지역별

제12장 주요 발전

제13장 기업 프로파일링

KTH
영문 목차

영문목차

According to Stratistics MRC, the Global Automotive Electric Actuator Market is accounted for $27.7 billion in 2025 and is expected to reach $47.9 billion by 2032 growing at a CAGR of 8.1% during the forecast period. An automotive electric actuator is an essential component in modern vehicles that converts electrical energy into mechanical motion to control various functions. It plays a key role in enhancing vehicle efficiency, safety, and comfort by automating processes such as throttle control, variable valve timing, turbocharger actuation, HVAC systems, power seats, and braking mechanisms. Unlike traditional hydraulic or pneumatic actuators, electric actuators offer higher precision, faster response, lower emissions, and reduced energy consumption.

Market Dynamics:

Driver:

Vehicle electrification & emission regulations

Rising vehicle electrification is increasing demand for compact, energy-efficient actuation systems across powertrain and chassis applications. Regulatory mandates are intensifying the transition from mechanical to electronic control mechanisms. Adoption is further supported by lightweight materials and modular integration strategies. Industry-wide focus on sustainability is elevating the strategic importance of electric actuators. Continued innovation in design and performance is reinforcing their role in next-generation mobility platforms.

Restraint:

Complex integration with vehicle systems

Diverse vehicle platforms require customized actuator designs, increasing development time and cost. Synchronization with electronic control units (ECUs) and sensor networks demands high precision and robust software support. Retrofitting in legacy systems adds further engineering overhead. Smaller suppliers may struggle with validation and compliance across global standards. These constraints are slowing adoption in cost-sensitive and low-volume segments.

Opportunity:

Energy efficiency & environmental benefits

Expanding applications in regenerative braking, active cooling, and thermal management systems are broadening their functional relevance. Advancements in materials and embedded control algorithms are elevating performance standards across platforms. Investment from OEMs is accelerating development to meet evolving sustainability and energy targets. Integration with electrified drivetrains and smart vehicle architectures is reinforcing market potential. These factors are collectively shaping a strong trajectory for long-term growth in the automotive electric actuator segment.

Threat:

Threat from alternative actuation technologies

Adoption is gaining traction within autonomous vehicle platforms that require adaptive and multifunctional actuation. Evaluation of cost-performance trade-offs and integration feasibility is underway across OEM development pipelines. Absence of standardized protocols and limited long-term validation data are creating barriers to widespread deployment. Market fragmentation and technical uncertainty are influencing strategic decisions in component sourcing. Competitive pressure from these alternatives is reshaping future market dynamics for electric actuators.

Covid-19 Impact:

The Covid-19 pandemic significantly disrupted the automotive electric actuator market by halting production, delaying supply chains, and reducing vehicle sales due to lockdowns and travel restrictions. Manufacturers faced shortages of raw materials and components, impacting production capacity. Demand for new vehicles dropped as consumer spending declined. However, as restrictions eased, the market began recovering, driven by increasing adoption of electric vehicles and advanced automotive technologies. The pandemic highlighted the need for supply chain resilience and accelerated digital transformation in the industry.

The throttle actuators segment is expected to be the largest during the forecast period

The throttle actuators segment is expected to account for the largest market share during the forecast period due to their essential role in regulating engine performance. These systems manage airflow and fuel delivery, supporting emission compliance and driving efficiency. Integration with electronic control units enhances responsiveness. Demand spans across combustion, hybrid, and electric vehicles. Manufacturers are optimizing design for precision and durability. This segment will continue to lead due to its core function in vehicle dynamics.

The polymer segment is expected to have the highest CAGR during the forecast period

Over the forecast period, the polymer segment is predicted to witness the highest growth rate owing to demand for lightweight and cost-effective materials. Use in gears, housings, and linkages helps reduce vehicle weight and improve fuel economy. Material innovations are enabling heat-resistant and durable designs. OEMs are adopting polymers to meet sustainability and recyclability goals. Integration with smart systems is expanding application scope. This segment is set for rapid growth as light weighting becomes a design priority.

Region with largest share:

During the forecast period, the North America region is expected to hold the largest market share by advanced vehicle technologies and the strong presence of leading automakers. The region emphasizes innovations in autonomous driving, fuel efficiency, and emission control. Growing consumer preference for electric and hybrid vehicles fuels actuator demand across applications, HVAC and safety systems. Strict government regulations on emissions and rising investments in connected vehicles further enhance adoption. Additionally, integration of smart features and driver-assist technologies accelerates the use of compact and energy-efficient actuators. The competitive landscape is shaped by collaborations, product innovations, and aftermarket service expansions.

Region with highest CAGR:

Over the forecast period, the Asia Pacific region is anticipated to exhibit the highest CAGR due to increasing vehicle production, and growing disposable incomes. The region is a hub for small and mid-sized passenger vehicles where actuators are widely adopted to improve comfort and safety. Expanding electric vehicle adoption, especially in China, Japan, and South Korea, further boosts demand. Cost-effective manufacturing capabilities and government incentives for cleaner mobility strengthen the market. Rising integration of advanced electronics in vehicles supports actuator usage in throttle, braking, and seating systems. Local suppliers and global players actively expand their footprints, creating a highly dynamic and competitive environment.

Key players in the market

Some of the key players in Automotive Electric Actuator Market include Robert Bosch GmbH, Continental AG, Denso Corporation, Mitsubishi Electric Corporation, Nidec Corporation, Johnson Electric Holdings Ltd., Hitachi Ltd., Aptiv PLC, BorgWarner Inc., CTS Corporation, Hella GmbH & Co. KGaA, Valeo SA, ZF Friedrichshafen AG, Magneti Marelli S.p.A. and Mahle GmbH.

Key Developments:

In July 2025, Continental Automotive's CES division expanded its engineering partnerships across six customer segments, including niche OEMs and urban mobility innovators. These collaborations focus on scalable actuator integration for autonomous platforms, bridging high-volume production with custom applications in drones, hypercars, and next-gen electric vehicles.

In January 2025, Bosch published its strategic whitepaper emphasizing cross-industry partnerships to accelerate software-defined vehicle (SDV) transformation. The company is actively collaborating with hyperscalers, SoC suppliers, and OEMs to integrate modular electric actuator systems into centralized E/E architectures for next-gen mobility platforms.

Types Covered:

Vehicle Types Covered:

Motion Types Covered:

Voltage Ranges Covered:

Material Types Covered:

Sales Channels Covered:

Regions Covered:

What our report offers:

Free Customization Offerings:

All the customers of this report will be entitled to receive one of the following free customization options:

Table of Contents

1 Executive Summary

2 Preface

3 Market Trend Analysis

4 Porters Five Force Analysis

5 Global Automotive Electric Actuator Market, By Type

6 Global Automotive Electric Actuator Market, By Vehicle Type

7 Global Automotive Electric Actuator Market, By Motion Type

8 Global Automotive Electric Actuator Market, By Voltage Range

9 Global Automotive Electric Actuator Market, By Material Type

10 Global Automotive Electric Actuator Market, By Sales Channel

11 Global Automotive Electric Actuator Market, By Geography

12 Key Developments

13 Company Profiling

(주)글로벌인포메이션 02-2025-2992 kr-info@giikorea.co.kr
ⓒ Copyright Global Information, Inc. All rights reserved.
PC버전 보기