세계 섬유 강화 폴리머(FPR) 복합재 시장 규모는 2022년 2,510억 6,000만 달러에서 2030년 3,625억 4,000만 달러에 달하고, 2023-2030년의 예측 기간 동안 4.7%의 CAGR을 나타낼 것으로 예상됩니다. 지난 20년간의 기술 발전과 혁신으로 인해 강도가 높고 다양한 용도에 사용할 수 있는 우수한 재료에 대한 수요가 증가하고 있습니다.
섬유 강화 폴리머(FPR) 복합재료는 운송 산업, 항공기, 헬리콥터 등에서 전통적인 알루미늄 및 강철과 같은 부품을 대체하고 있습니다. 첨단 탄소섬유 복합재료는 우주 및 항공기 응용 분야의 재료 요구 사항을 변화시키고 있으며, FPR은 강성, 강도 및 피로 저항과 같은 고유 한 특성을 가지고있어 가혹한 환경에 영향을 받기 쉽습니다. 다양한 공기 역학적 차량의 곡선 부품은 최고급 재료로 간주되는 유리 섬유 및 탄소섬유 복합재료를 사용하여 제조됩니다. 이러한 탄소섬유 복합재료는 유지 보수가 용이하고 연비 효율이 뛰어나며 습기, 햇빛 노출 및 열 손상에 대한 저항력이 뛰어납니다.
국제자동차산업협회(OICA)는 2022년 자동차 생산량이 6% 증가하여 약 8,500만 대의 자동차가 생산될 것으로 전망하고 있습니다. 항공 제조 부문을 선도하는 Boeing은 2041년까지 신규 항공기 납품 시장 규모가 7조 2,000억 달러에 달할 것이며, 주요 납품처는 아시아태평양이 될 것이라는 상업적 시장 전망을 예측했습니다.
탄소섬유강화플라스틱(CFRP) 소재는 원래 경량화 부품을 개발하던 자동차 산업의 발전을 바꾸고 있습니다. 기계적 강도와 압착 거동 요구 사항을 충족하는 동시에 차량 무게를 줄이는 것이 필수적인 자동차 산업의 구조 부품은 탄소섬유 강화 플라스틱 재료를 사용하여 실현됩니다. 리어 시트, 윈드실드 프레임, 기둥 보강재 등은 이러한 소재를 사용하여 크게 최적화 된 경량화 차량의 대표적인 부품입니다. 첨단 자동차의 경량화는 에너지 소비를 줄이는 데 크게 기여하고 있습니다. 섬유 강화 열경화성 수지는 내화성, 내열성, 내음성, 전자파 차폐의 최고 기준을 충족하는 EV용 고전압 배터리에 탑재되고 있습니다.
국제에너지기구(IEA)가 발표한 보고서는 세계 전기차 전망을 반영하여 2022년에 1,000만 대 이상의 전기차가 판매되고 이후 35% 성장하여 약 1,400만 대에 달할 것으로 예상했습니다. 전기자동차의 절반 이상이 중국, 유럽, 미국에서 판매되고 있으며, 이들 국가의 다양한 야심찬 정책 프로그램으로 인해 전기자동차 시장 점유율이 더욱 확대될 것으로 예상됩니다.
전자의 빈번한 기술 혁신은 섬유 강화 폴리머(FPR) 복합재료를 사용하여 이루어지고 있습니다. 강도는 그대로 유지하면서 경량화된 이 소재는 소비자 전자제품 생산에 활용되고 있습니다. 이러한 열가소성 복합재료를 전자기기 하우징에 사용하는 가장 큰 장점은 우수한 강도와 하중 변형 요구 사항을 쉽게 충족할 수 있다는 점입니다. 소비자 전자제품은 엄청난 마모와 파손으로 인해 원치 않는 스크래치가 발생할 수 있지만, 섬유 강화 폴리머(FPR) 복합재료는 스크래치 저항성이 뛰어나 예측할 수 없는 조건에서도 견딜 수 있습니다. 스크래치 저항성 외에도 FPR은 내열성 및 난연성을 갖추고 있어 소비자 전자제품에서 자주 발생하는 과열 문제를 근절할 수 있습니다.
Consumer Technology Association이 발표한 데이터에 따르면, 2022년 미국 소비자 기술 산업의 소매 매출은 5,050억 달러 이상에 달할 것으로 예상되며, 2022년 IBM은 605억 달러의 매출을 기록하여 약 12%의 매출 성장을 달성할 것으로 예상됩니다. IBM은 약 20억 달러의 투자와 8개의 기업 인수를 통해 약 12%의 매출 성장을 달성할 것으로 예상됩니다.
코로나19의 발생은 많은 부문과 사람들의 삶에 심각한 영향을 미쳤으며, 모든 사람이 감염에 취약해졌습니다. 건설업과 방위산업은 낮은 수요와 노동력과 기술 가용성으로 인해 가장 중요한 부문이었습니다. 자동차 산업과 항공 산업은 전염병 기간 동안 완전히 중단되어 이러한 복합재료와 재료의 사용이 감소했습니다. 시간이 지남에 따라 규제가 완화됨에 따라 소재 기업들은 새로운 섬유 강화 복합재료에 대한 투자와 개발을 강요받았고, 이는 시장 성장으로 이어졌습니다.
이 보고서는 세계 섬유 강화 폴리머(FPR) 복합재료 시장에 대해 조사 분석했으며, 시장 규모와 예측, 시장 역학, 주요 기업 현황과 전망 등을 전해드립니다.
Global Fiber Reinforced Polymer (FPR) Composites Market size was valued at USD 251.06 billion in 2022 which is expected to reach USD 362.54 billion in 2030 with a CAGR of 4.7% for the forecast period between 2023 and 2030. The advancement in technology and innovation over the last two decades has raised the demand for good materials with excellent strength and use in various applications. Fiber reinforced polymer composites are significantly stronger than steel and other hard materials and possess non-corrosive properties. A wide range of carbon fiber and its reinforced plastics are incorporated in numerous applications like aerospace, automotive, etc. Glass fiber reinforced plastics are gaining prominent importance in upgrading product design that offers high strength and moderate stiffness along with minimizing the weight of the components. These materials possess excellent damping characteristics and are resistant to chemicals and corrosion. With various effective properties fiber reinforced polymer composites have incredible market potential where its contribution to the market is significantly recognized.
Fiber-reinforced polymer (FPR) composite materials are progressively replacing the conventional aluminum and steel-like components in the transportation industry, aircraft, helicopters, etc. There are advanced carbon fiber composites that are transforming the materials requirement for space and aircraft applications. FPR possesses unique characteristics like stiffness, strength, and fatigue resistance, which make them susceptible to aggressive environments. Curved parts of different aerodynamic vehicles are manufactured using fiberglass and carbon fiber composites, which are considered superlative materials. Such carbon fiber composites can easily be maintained and have fantastic fuel efficiency and reflect remarkable resistance to moisture, sun exposure, and thermal damage.
The International Organization of Motor Vehicle Manufacturers (OICA) estimates that in 2022, vehicle manufacturing will significantly increase by 6%, accounting for about 85 million automobiles. Boeing aviation company, which is leading the airline manufacturing unit, forecasts a commercial market outlook that will reach a market value of USD 7.2 trillion for new airplane deliveries through 2041, where the major deliveries will be to the Asia-Pacific regions.
Carbon fiber-reinforced plastic (CFRP) materials are changing the advancement in the automotive industry, which essentially develops lightweight parts. Structural components for the automotive industry that indispensably meet the requirement of mechanical strength and crash behavior while reducing the vehicle weight simultaneously are achieved by using carbon fiber-reinforced plastic materials. Rear seats, windshield frames, and pillar reinforcements are some prominent parts in lightweight vehicles that are substantially optimized using such materials. The reduction in weight of advanced vehicles significantly led to a reduction in energy consumption. Fiber-reinforced thermosets are equipped with EV-high voltage batteries that meet the highest standards for fire resistance, thermal, acoustics, and electromagnetic shielding.
A report stated by the International Energy Agency reflects the global electric vehicle outlook and represents that in 2022 over 10 million electric vehicles were sold, which is subsequently estimated to grow by 35% to reach around 14 million. Over half of all electric vehicles are from China, Europe, and the United States, where different ambitious policy programs in such countries are further expected to increase the market share for electric vehicles.
Frequent innovations in electronics are successfully accomplished using fiber reinforced polymer (FPR) composite materials. Without compromising the strength, these lightweight materials are leading to the production of consumer electronics. The significant benefits of using such thermoplastic composites in electronic casing are superior strength and can easily meet load-deflection requirements. Enormous wear and tear in consumer electronics are very common, which leads to unwanted scratches, and fiber-reinforced polymer composites are scratch-resistant and can withstand extremely unpredictable conditions. In addition to scratch resistance, these FPRs are also equipped with heat resistant and fire retardant properties that eradicate the frequent overheating problems that occur in consumer electronics.
Data released by the Consumer Technology Association states that in 2022, the United States consumer technology industry is estimated to generate over USD 505 billion in retail sales revenue. In 2022, IBM generated a revenue of USD 60.5 billion, consequently leading to a revenue growth of around 12%. They have successfully invested around USD 2 billion and assisted in acquiring 8 companies.
The outbreak of COVID-19 has severely impacted numerous sectors and human livelihoods, where every person was vulnerable to infectious disease. Construction and defense industries were the most important sectors due to the low demand and availability of workers and technology. The Automotive and aviation industries were totally shut down during the pandemic, which reduced the utilization of such composites and materials. The ease in restrictions over time has forced materials companies to invest and develop novel fiber-reinforced composite materials, which progressively led to the growth of the Fiber Reinforced Polymer (FPR) Composites market.
The Fiber Reinforced Polymer (FPR) Composites market is successfully growing with the increasing demand for effective material solutions that are equipped with incredible properties and carry lightweight. Hexcel Corporation has developed carbon fiber composite materials by the registered HexTow carbon fiber that has advanced applications in aerospace and industries. Hexcel manufactures lightweight, high-strength composite structures for commercial and military aircraft, business jets, and space modules. They also offer a wide range of globally certified aerospace products that vary according to the required types like glass, carbon, aramid, and specialty fibers.
Hexcel Corporation, in March 2023, commenced a new center for research and technology excellence in West Valley City, Utah, that substantially supports next-generation developments in advanced composites technologies.
All segments will be provided for all regions and countries covered:
Companies mentioned above DO NOT hold any order as per market share and can be changed as per information available during research work.