Vehicle Armor Materials Market by Type (Metals & Alloys, Ceramics, Composites, Fiberglass, Aramid Fibers), Application (Defense, Para Military, Police, Security Agencies, Personal), and Region (North America, Europe, APAC, ROW) - Global Forecast to 2029
상품코드:1458538
리서치사:MarketsandMarkets
발행일:2024년 03월
페이지 정보:영문 202 Pages
라이선스 & 가격 (부가세 별도)
ㅁ Add-on 가능: 고객의 요청에 따라 일정한 범위 내에서 Customization이 가능합니다. 자세한 사항은 문의해 주시기 바랍니다.
한글목차
세계의 차량용 장갑재 시장 규모는 2024년 67억 달러로 추정되고, 2029년까지 93억 달러에 이를 전망이며, CAGR 6.7%의 성장이 예측되고 있습니다.
시장은 세계 안보 위협의 진화와 재료 과학의 기술 발전을 모두 반영하는 복합 요인에 의해 급속한 확대를 보여줍니다. 이러한 성장을 뒷받침하는 것은 성능과 기동성을 손상시키지 않으면서 보호 성능을 향상시킨 차량에 대한 군, 법 집행 기관 및 민간 부문 수요 증가입니다. 첫째, 안전보장 위협을 둘러싼 세계정세는 끊임없이 변화하고 있으며, 무력분쟁, 테러리즘, 도시에서의 폭력 등이 복잡한 과제를 뚫고 있습니다. 이 예측 불가능한 환경으로 인해 고속 투사물부터 폭발물까지 다양한 위협에 대해 뛰어난 방어력을 발휘할 수 있는 장갑차의 개발이 필요합니다. 그 결과 세계 국방군과 치안기관은 최신 장갑 기술로 차량을 업그레이드하기 위해 많은 투자를 하고 있으며 시장 성장에 박차를 가하고 있습니다. 둘째, 재료과학 기술의 발전으로 보다 가볍고 내구성이 우수하면서도 내탄성을 향상시킨 혁신적인 장갑재가 개발되고 있습니다. 세라믹, 초고분자량 폴리에틸렌(UHMWPE), 첨단 금속 합금을 포함한 복합 장갑은 이러한 개발의 최전선에 있습니다. 이러한 재료는 우수한 보호 성능을 제공할 뿐만 아니라 경량화를 통해 차량 전체의 성능을 향상시키고 연비와 속도를 향상시키는 데에도 기여합니다. 게다가 민간부문이 개인 안보에 관심을 갖게 되면서 장갑승용차 수요에 박차가 가해져 시장 범위가 더욱 넓어지고 있습니다. 이 수요는 범죄율이 높은 지역이나 정세가 불안정한 지역에서 특히 두드러지며, 사람들과 기업 자산의 안전이 가장 중요한 과제가 되고 있습니다. 시장 확대에는 규제 요인도 중요한 역할을 합니다. 정부와 국제기구는 엄격한 안전 기준과 규제를 실시하고 있으며, 제조업체는 이러한 요구 사항을 준수하기 위해 최신 장갑 기술과 재료를 채택하도록 강요하고 있습니다. 이러한 규제 압력은 산업 내 혁신과 채택의 지속적인 사이클을 보장합니다. 마지막으로 시장에서는 차량 제조업체, 재료 과학자, 방위 계약자간의 제휴 증가가 보입니다. 이러한 파트너십은 차량 설계 단계에서 장갑 솔루션을 통합하는 것을 목표로 하며, 보호, 성능 및 비용 효율성을 철저히 최적화한 플랫폼 개발로 이어집니다.
조사 범위
조사 대상년도
2020-2029년
기준년
2023년
예측 기간
2024-2029년
단위
금액(10억/100만 달러), 수량(킬로톤)
부문
유형별, 용도별, 지역별
대상 지역
아시아태평양, 북미, 유럽, 중동, 아프리카, 남미
'금액 기준으로는 방위가 차량용 장갑재 시장에서 예측 기간에 CAGR로 6.9%로 가장 빠르게 성장할 전망입니다.'
차량용 장갑재 시장에서 가장 급성장하고 있는 부문으로서의 방위 부문의 지위는 기본적으로 세계의 안보 과제의 진화하는 성질과 군사 요건의 진보하는 적합에 관련되어 있습니다. 이러한 성장은 첨단 보호 솔루션에 대한 이 부문의 임박한 필요성을 명확히 하는 서로 관련된 여러 요인들에 의해 촉진되고 있습니다. 첫째, 현대 전장은 끊임없이 변화하는 위협의 상황을 특징으로 하며, 적대 세력은 다양한 전술과 점점 더 진화하는 무기를 전개하고 있습니다. 기존의 탄도 공격에서 즉석 폭발 장치(IED)와 선진 대장갑 시스템에 이르기까지 폭넓은 위협으로부터 군인과 자산을 지키는 것이 급무이기 때문에 혁신적인 장갑재에 대한 수요가 높아지고 있습니다. 이러한 재료는 강화된 탄도 보호뿐만 아니라 전투 시나리오에서 중요한 차량의 기동성과 연료 효율을 향상시키는 경량화도 제공해야 합니다. 재료 과학의 기술 발전은 이 부문의 성장에 크게 기여합니다. 새로운 복합재료, 첨단 세라믹, 초고강도 합금의 개발로 뛰어난 보호 능력과 상당한 경량화를 겸비한 장갑이 탄생했습니다. 이 두 가지 장점은 최고 수준의 보호를 보장하면서 다양한 지형에서 신속하게 조종할 수 있는 차량에 대한 군의 운영 요구에 직접 대응합니다. 이러한 기술 혁신은 또한 장갑차의 수명을 연장시켜 마모 및 환경 조건에 대한 내성을 향상시킵니다.
이 보고서는 세계의 차량용 장갑재 시장에 대한 조사 분석을 통해 주요 촉진요인 및 억제요인, 경쟁 구도, 미래 동향 등의 정보를 제공합니다.
목차
제1장 서론
제2장 조사 방법
제3장 주요 요약
제4장 중요 인사이트
차량용 장갑재 시장의 기업에게 매력적인 기회
차량용 장갑재 시장 : 유형별
차량용 장갑재 시장 : 국가별
제5장 시장 개요
서문
시장 역학
성장 촉진요인
억제요인
기회
과제
Porter's Five Forces 분석
고객의 비즈니스에 영향을 미치는 동향 및 혼란
에코시스템 맵
관세 및 규제 상황
규제기관, 정부기관 및 기타 조직
차량용 장갑재 시장에 관한 규제
밸류체인 분석
원재료 공급자
연구개발
용도 및 책정자
최종 사용자
투자 및 자금조달
기술 분석
가격 분석
평균 판매 가격의 동향 :지역별
평균 판매 가격 : 유형별
주요 기업의 평균 판매 가격 : 상위3 유형별
특허 분석
무역 분석
수입 시나리오
수출 시나리오
사례 연구 분석
주된 회의 및 이벤트(2024-2025년)
주요 이해관계자 및 구매 기준
제6장 차량용 장갑재 시장 : 유형별
서문
금속 및 합금
세라믹
복합재료
아라미드 섬유
유리 섬유
기타 유형
제7장 차량용 장갑재 시장 : 용도별
서문
방위
민병 조직
경찰
보안 기관
개인
기타 용도
제8장 차량용 장갑재 시장 : 지역별
서문
아시아태평양
북미
유럽
중동 및 아프리카
남미
제9장 경쟁 구도
서문
시장 점유율 분석
주요 시장 기업 순위(2022년)
주요 기업의 시장 점유율
수익 분석
기업의 평가 매트릭스 : 주요 기업(2023년)
기업의 평가 매트릭스 : 스타트업 및 중소기업(2023년)
경쟁 시나리오 및 동향
제10장 기업 프로파일
주요 기업
DUPONT DE NEMOURS, INC.
SAINT-GOBAIN SA
ALLEGHENY TECHNOLOGIES INCORPORATED(ATI INC.)
HONEYWELL INTERNATIONAL INC.
TEIJIN LIMITED
ALCOA CORPORATION
TATA STEEL LIMITED
SSAB
CERAMTEC
MORGAN ADVANCED MATERIALS
기타 기업
PPG INDUSTRIES
COORSTEK INC.
CERCO CORPORATION
AGY HOLDING CORP.
SAFARILAND, LLC
LEECO STEEL
ARMORWORKS ENTERPRISES LLC
WACO COMPOSITES
AT&F ADVANCED METALS LLC
PROTECTIVE STRUCTURES, LTD.
CPS TECHNOLOGIES, CORP.
JPS COMPOSITES MATERIALS
SCHUNK CARBON TECHNOLOGY
SURMET CORPORATION
3M
제11장 부록
AJY
영문 목차
영문목차
The vehicle armor materials market is projected to reach USD 9.3 billion by 2029, at a CAGR of 6.7% from USD 6.7 billion in 2024. The vehicle armor materials market is experiencing rapid expansion, driven by a combination of factors that reflect both the evolving nature of global security threats and technological advancements in material science. This growth is underpinned by increasing demand from military, law enforcement, and civilian sectors for vehicles that offer enhanced protection without compromising on performance or mobility. Firstly, the global landscape of security threats is continuously changing, with armed conflicts, terrorism, and urban violence presenting complex challenges. This unpredictable environment has necessitated the development of armored vehicles capable of providing superior protection against a wide array of threats, from high-velocity projectiles to explosive devices. As a result, defense forces and security agencies worldwide are investing significantly in upgrading their fleets with the latest armor technologies, fueling market growth. Secondly, technological advancements in materials science have led to the development of innovative armor materials that offer improved ballistic resistance while being lighter and more durable. Composite armors, incorporating ceramics, ultra-high molecular weight polyethylene (UHMWPE), and advanced metallic alloys, are at the forefront of these developments. These materials not only provide superior protection but also contribute to the overall vehicle performance by reducing weight, thereby enhancing fuel efficiency and speed. Additionally, the civilian sector's interest in personal security has spurred demand for armored passenger vehicles, further broadening the market's scope. This demand is particularly pronounced in regions with high crime rates or political instability, where the safety of individuals and corporate assets is a paramount concern. Regulatory factors also play a significant role in the market's expansion. Governments and international bodies are implementing stringent safety standards and regulations, pushing manufacturers to adopt the latest armor technologies and materials to comply with these requirements. This regulatory pressure ensures a continuous cycle of innovation and adoption within the industry. Lastly, the market is witnessing increased collaboration between vehicle manufacturers, material scientists, and defense contractors. These partnerships aim to integrate armor solutions during the vehicle design phase, leading to the development of platforms that are optimized for protection, performance, and cost-effectiveness from the ground up.
Scope of the Report
Years Considered for the Study
2020-2029
Base Year
2023
Forecast Period
2024-2029
Units Considered
Value (USD Billion/Million), Volume (Kiloton)
Segments
Type, Application, and Region
Regions covered
Asia Pacific, North America, Europe, Middle East & Africa, and South America
"Composites, by type, accounts for the second-largest market share in 2024."
Composites represent the second largest material type in the vehicle armor materials market, standing out as a pivotal component due to their unique blend of properties that traditional materials like metals cannot match. This category has gained prominence for several reasons, which are integral to understanding its position and role in the market. The core advantage of composite materials lies in their exceptional strength-to-weight ratio. Composites can provide similar or superior levels of ballistic protection as metals while significantly reducing the overall weight of the armor. This reduction in weight is crucial for vehicle performance, allowing for greater mobility, increased payload capacity, and improved fuel efficiency - factors that are especially important in military operations where agility and endurance are paramount. Another key feature of composites is their versatility in protection capabilities. By adjusting the composition and layering of materials, manufacturers can tailor armor solutions to protect against a wide range of threats, from small arms fire to explosive devices. This customization enables the development of specialized armor systems for different operational requirements, enhancing the versatility and applicability of armored vehicles across various scenarios. Technological advancements have also propelled composites to the forefront of the vehicle armor materials market. Innovations in material science and manufacturing processes have led to the development of new composite materials that offer improved ballistic resistance, durability, and environmental resistance. These advancements not only enhance the protective capabilities of composites but also contribute to cost efficiency over the armor's lifecycle, considering factors like maintenance, repair, and replacement. Furthermore, the integration of composites in vehicle armor aligns with the growing emphasis on survivability and crew protection as primary design considerations. Composites can be engineered to absorb and disperse the energy from impacts and blasts more effectively than traditional materials, reducing the risk of injury to occupants and ensuring the structural integrity of the vehicle in combat situations. The environmental impact of materials used in vehicle armor is increasingly becoming a concern, and here too, composites offer benefits. They are often more environmentally friendly to produce and dispose of than traditional armor materials, aligning with global efforts to reduce the environmental footprint of defense and security operations.
"Defense is expected to be the fastest growing at CAGR 6.9% for vehicle armor materials market during the forecast period, in terms of value."
The defense sector's position as the fastest-growing segment in the vehicle armor materials market is fundamentally linked to the evolving nature of global security challenges and the progressive adaptation of military requirements. This growth is fueled by several interconnected factors that underscore the sector's pressing need for advanced protective solutions. Firstly, the modern battlefield is characterized by an ever-changing threat landscape, where adversaries deploy a variety of tactics and increasingly sophisticated weaponry. The imperative to safeguard military personnel and assets against a broad spectrum of threats, ranging from conventional ballistic attacks to improvised explosive devices (IEDs) and advanced anti-armor systems, drives the demand for innovative armor materials. These materials must offer not only enhanced ballistic protection but also reduced weight to improve vehicle mobility and fuel efficiency, which are critical in combat scenarios. Technological advancements in material science significantly contribute to the sector's growth. The development of new composite materials, advanced ceramics, and ultra-high-strength alloys has led to the creation of armor that combines superior protective capabilities with significant weight reductions. This dual benefit directly addresses the military's operational needs for vehicles that can swiftly maneuver in diverse terrains while ensuring the highest levels of protection. Such innovations also extend the service life of armored vehicles, offering better resistance to wear and environmental conditions, which is crucial for maintaining operational readiness. Another pivotal factor is the increase in defense budgets globally, with a considerable portion earmarked for the modernization and procurement of military vehicles. This financial backing facilitates the adoption of cutting-edge armor technologies, reflecting a widespread commitment to enhancing force survivability. Governments and defense departments recognize the strategic value of investing in advanced armor solutions as part of broader efforts to maintain a qualitative edge in military capabilities. Furthermore, there is an acute focus on personnel safety within the defense sector. The enhanced protection provided by advanced armor materials directly contributes to reducing casualties and injuries in conflict situations. This emphasis on survivability has catalyzed the integration of sophisticated armor systems into a wide range of military vehicles, from front-line combat platforms to support and logistics vehicles, ensuring comprehensive protection for troops across all operational contexts. Additionally, the demand for multi-mission capabilities in military operations necessitates vehicles that are adaptable and can be quickly reconfigured with different armor packages to meet the requirements of specific missions, whether in urban combat, reconnaissance, or peacekeeping roles. The defense sector's need for modular and scalable armor solutions underscores the importance of versatility in vehicle design and protection, driving continuous innovation in the vehicle armor materials market. Lastly, regulatory and standardization efforts by military organizations and international defense standards bodies play a crucial role in shaping the market. These entities regularly update protection requirements, pushing manufacturers to continuously refine and enhance their armor offerings to comply with the latest standards. This ensures that military vehicles are equipped with the most effective and up-to-date protective technologies, ready to face current and future threats on the battlefield.
"Based on region, Europe was the second largest market for vehicle armor materials market in 2024."
Europe holds the position of the second largest market for vehicle armor materials, a status underpinned by several key factors that reflect the region's unique geopolitical, economic, and technological landscape. Firstly, Europe's complex security environment, marked by evolving threats both within and at the borders of the continent, necessitates advanced protective solutions for military and civilian vehicles alike. This need is accentuated by ongoing tensions in various regions, the rise in terrorism, and the need for peacekeeping and humanitarian missions, driving demand for armored vehicles equipped with the latest material innovations. Moreover, Europe boasts a robust industrial base with some of the world's leading defense contractors and material science companies. This industrial ecosystem fosters significant research and development activities, leading to technological advancements in armor materials that cater to the stringent requirements of both European and global defense markets. European companies are at the forefront of developing innovative composite materials, ceramics, and lightweight alloys, contributing to the global supply chain of advanced armor solutions. The region's commitment to regulatory standards and collaborative defense initiatives also plays a crucial role. European countries, through frameworks like the European Defence Agency (EDA), actively pursue standardization and interoperability in defense procurement, including vehicle armor. This encourages harmonization in defense spending and fosters a market environment conducive to innovation and cross-border collaboration. Economic factors, including sustained defense spending among European NATO members committed to meeting their defense investment pledges, further stimulate the vehicle armor materials market. These investments are directed towards modernizing military fleets, enhancing national and collective defense capabilities, and ensuring the safety of military personnel, all of which require the latest in vehicle armor technology. Lastly, the civilian sector in Europe contributes to the demand for armored vehicles, driven by concerns over personal security and the protection of assets in regions with high rates of crime or political instability. This civilian market segment, although smaller than the military sector, underscores the diverse applications of vehicle armor materials and the broad spectrum of protection needs across the continent.
In the process of determining and verifying the market size for several segments and subsegments identified through secondary research, extensive primary interviews were conducted. A breakdown of the profiles of the primary interviewees is as follows:
By Company Type: Tier 1 - 40%, Tier 2 - 30%, and Tier 3 - 30%
By Designation: C-Level - 20%, Director Level - 10%, and Others - 70%
By Region: North America - 20%, Europe -30%, Asia Pacific - 30%, Middle East & Africa - 10%, and South America-10%
The key players in this market are DuPont De Nemours, Inc. US), Saint-Gobain SA (France), ATI, Inc. (US), Honeywell international Inc. (US), Teijin Limited (Japan), Alcoa Corporation (US), Tata Steel Limited (India), Ceramtec (Germany), SSAB AB (Sweden), Morgan Advanced Materials (UK) etc.
Research Coverage
This report segments the market for the vehicle armor materials market on the basis of type, application, form, end-use industry and region. It provides estimations for the overall value of the market across various regions. A detailed analysis of key industry players has been conducted to provide insights into their business overviews, products & services, key strategies, new product launches, expansions, and mergers & acquisitions associated with the market for the vehicle armor materials market.
Key benefits of buying this report
This research report is focused on various levels of analysis - industry analysis (industry trends), market ranking analysis of top players, and company profiles, which together provide an overall view of the competitive landscape, emerging and high-growth segments of the vehicle armor materials market; high-growth regions; and market drivers, restraints, opportunities, and challenges.
The report provides insights on the following pointers:
Analysis of key drivers: Technological advancements in the electronics industry coupled with rise in demand for hydrogen peroxide in the semiconductor industry.
Market Penetration: Comprehensive information on the vehicle armor materials market offered by top players in the global vehicle armor materials market.
Product Development/Innovation: Detailed insights on upcoming technologies, research & development activities, and new product launches in the vehicle armor materials market.
Market Development: Comprehensive information about lucrative emerging markets - the report analyzes the markets for the vehicle armor materials market across regions.
Market Diversification: Exhaustive information about new products, untapped regions, and recent developments in the global vehicle armor materials market.
Competitive Assessment: In-depth assessment of market shares, strategies, products, and manufacturing capabilities of leading players in the vehicle armor materials market.
