한글목차

세계의 고정식 브릿지 CMM 시장 미래는 자동차, 항공우주, 중기계, 의료시장에 기회가 있을 것입니다. 글로벌 고정 브리지 CMM 시장은 2025년부터 2031년까지 8.7%의 연평균 성장률(CAGR)을 나타낼 것으로 예상됩니다. 이 시장의 주요 촉진요인은 제조 및 품질 관리 프로세스에서 정밀 측정에 대한 수요 증가, 정확성 및 자동화를 향상시키는 CMM 기술의 진보, 자동차 및 항공우주 등 산업에서의 자동화 도입 증가입니다.

Lucintel의 예측에서는 유형별로는 항공우주나 자동차 등의 산업에서 대형 부품의 정밀 측정 요구가 높아지고 있기 때문에 대형이 예측 기간 중에 높은 성장을 이룰 전망입니다.

용도별로는 자동차 제조 및 품질 관리 프로세스에서 정밀 측정에 대한 수요가 높기 때문에 자동차가 가장 높은 성장이 예상되고 있습니다.

지역별로는 정밀 측정 기술에 대한 수요와 산업의 급속한 성장으로 아시아태평양이 예측 기간 동안 가장 높은 성장을 이룰 전망입니다.

150페이지 이상의 종합적인 보고서를 통해 비즈니스 의사 결정에 도움이 되는 귀중한 인사이트를 얻으십시오.

고정식 브릿지 CMM 시장 새로운 동향

고정식 브릿지 CMM 시장은 시장을 변화시키는 다양한 신흥 동향을 가지고 있습니다. IoT, Industry 4.0의 개념을 통합하고 있습니다. 현대 제조업 수요에 부응하고자 하는 산업계는 이러한 동향이 시장에 영향을 미치고 품질 관리에 의해 정밀하고 효율적인 솔루션을 가져올 것입니다.

• CMM과 자동 생산 라인의 통합 : 이는 자동화된 생산 라인에 CMM을 통합하는 등 업계에서 가장 중요한 동향 중 하나입니다. 현재 일관성이 확보됩니다. 현재 높은 생산률이 요구되고 있으며 휴먼 에러를 줄여야 합니다.
• 인공지능과 머신러닝 : 고정식 브릿지 CMM에 AI와 머신러닝을 통합하여 측정 프로세스에 혁명을 가져오고 있습니다. 3차원 측정기는 새로운 측정 조건에 대한 적응성을 높여 과거의 데이터로부터 학습할 수 있기 때문에 신뢰성 향상, 조작의 고속화, 비용 절감이 가능해집니다.
• 인더스트리 4.0과 스마트 CMM : 인더스트리 4.0의 원칙은 고정식 브릿지 CMM의 설계에 큰 영향을 미칩니다. 템은 실시간 품질 관리를 제공하여 수작업 검사를 최소화하고 생산 사이클 중에 제품이 설정된 규격을 준수하고 있음을 보장합니다.
• 컴팩트하고 휴대용 CMM에 대한 관심 증가 : 모바일 검사가 필요한 업계에서는 컴팩트하고 휴대용 CMM이 주목을 받고 있습니다. 제조의 여러 단계에서 많은 부품을 검사하고 때로는 이동하면서 검사를 실시하기 때문에 인라인 검사 및 아웃라인 검사에 많이 사용되고 있습니다.
• 지속가능성과 에너지 효율 : 고정식 브릿지 CMM의 개발은 지속가능성이 중요시되고 있습니다. 세계의 동향과 일치하고 있습니다. 지속가능성의 중시에는 재활용 가능한 재료의 사용, 폐기물의 저감, 전력 사용의 최적화 등이 포함됩니다.

이러한 새로운 동향은 측정 프로세스에 자동화, 연결성 및 효율성을 도입하여 고정식 브릿지 CMM 시장을 재구성하고 있습니다. MM 제조업체는 이러한 동향에 의해 첨단 기술의 혁신과 통합을 진행하고 있습니다. 그 결과, 복잡한 제조 공정에 대응해, 리얼타임의 품질 관리를 실현할 수 있는 보다 스마트하고 적응성이 높은 CMM 시스템으로 이동하고 있습니다.

고정식 브릿지 CMM 시장의 최근 동향

최근 고정식 브릿지 CMM 시장에서는 기술 혁신과 업계 요구사항의 변화로 인해 많은 주요 발전이 나타났습니다.

• 스마트 CMM 시스템 개발 : 스마트 CMM 시스템은 첨단 센서, AI, IoT 기술을 시스템에 도입하여 실시간으로 데이터 분석 및 측정의 자동 피드백을 가능하게 하는 것으로, 고정식 브릿지 CMM 시장에서 새로운 중요한 개발입니다.
• 자동 생산 라인과의 통합 또 다른 중요한 개발은 고정식 브릿지 CMM과 자동 생산 라인의 통합입니다. 기타 자동 시스템에 통합하는 것으로, 품질 관리가 합리화되고, 제조업체는 생산 속도를 희생하지 않고, 보다 높은 정밀도 기준을 만족시킬 수 있습니다.
• CMM 시스템의 소형화 및 휴대성 : 고정식 브릿지 CMM의 개발에서는 소형화와 휴대성이 중요한 동향이 되고 있습니다. 타블 CMM은 유연성과 편리성을 갖추고 있어 제조 현장이나 제조의 여러 단계에서 부품을 검사할 수 있습니다.
• 에너지 효율 향상 : 고정식 브릿지 CMM 시스템의 설계에서 에너지 효율 개념이 중요한 역할을 하고 있습니다. 작에 의한 환경에 대한 영향을 전체적으로 저감하기 위해, 새로운 모터나 한층 더 고도의 전력 관리 시스템을 사용해, 에너지 절약 설계가 되어 있습니다.
• 강도 향상을 위한 첨단 재료 : 고정식 브릿지 CMM의 구조는 내구성을 높이고 가혹한 환경에 견디도록 설계된 고급 재료가 사용되도록 되어 있습니다. 측정의 정밀도에 영향을 주는 환경 요인에 대한 내성도 갖추고 있습니다. 그 때문에 3차원 측정기 시스템의 신뢰성이 향상해, 다양한 조건하에서 성능을 발휘할 수 있게 되어, 보다 폭넓은 업계에 대응할 수 있게 되어 있습니다.

최근 이러한 동향은 CMM 시스템의 기술 혁신, 효율성, 용도의 이용을 증가시킴으로써 고정식 브릿지 CMM 시장을 견인하고 있습니다.

목차

제1장 주요 요약

제2장 세계의 고정식 브릿지 CMM 시장 : 시장 역학

• 서론, 배경, 분류
• 공급망
• 업계의 성장 촉진요인과 과제

제3장 시장 동향과 예측 분석(2019-2031년)

• 거시 경제 동향(2019-2024년)과 예측(2025-2031년)
• 세계의 고정식 브릿지 CMM 시장 동향(2019-2024년)과 예측(2025-2031년)
• 유형별
  • 중소
  • 대
• 용도별
  • 자동차
  • 항공우주
  • 중장비
  • 의학
  • 기타

제4장 지역별 시장 동향과 예측 분석(2019-2031년)

• 지역별
• 북미
• 유럽
• 아시아태평양
• 기타 지역

제5장 경쟁 분석

• 제품 포트폴리오 분석
• 운영 통합
• Porter's Five Forces 분석

제6장 성장 기회와 전략 분석

• 성장 기회 분석
  • 유형별
  • 용도별
  • 지역별
• 세계의 고정식 브릿지 CMM 시장 새로운 동향
• 전략 분석
  • 신제품 개발
  • 세계의 고정식 브릿지 CMM 시장 생산 능력 확대
  • 세계의 고정식 브릿지 CMM 시장 합병, 인수, 합작 사업
  • 인증 및 라이선싱

제7장 주요 기업의 기업 프로파일

• Hexagon
• Mitutoyo
• Zeiss
• FARO
• Nikon
• Werth
• Wenzel
• Tokyo Seimitsu
• Coord3
• Leader Metrology

영문목차

The future of the global fixed bridge CMM market looks promising with opportunities in the automotive, aerospace, heavy machinery, and medical markets. The global fixed bridge CMM market is expected to grow with a CAGR of 8.7% from 2025 to 2031. The major drivers for this market are growing demand for precision measurements in manufacturing and quality control processes, advancements in CMM technology for improved accuracy and automation, and increasing adoption of automation in industries like automotive and aerospace.

Lucintel forecasts that, within the type category, large is expected to witness higher growth over the forecast period due to increasing need for precise measurement of large-scale components in industries like aerospace and automotive.

Within the application category, automotive is expected to witness the highest growth due to high demand for precision measurement in vehicle manufacturing and quality control processes.

In terms of region, APAC is expected to witness the highest growth over the forecast period due to demand for precise measurement technologies and rapid industrial growth.

Gain valuable insights for your business decisions with our comprehensive 150+ page report. Sample figures with some insights are shown below.

Emerging Trends in the Fixed Bridge CMM Market

There are various emerging trends in the fixed bridge CMM market, which are transforming the market. These emerging trends are based on technological innovations, increased demands for higher precision, and faster production processes. These trends comprise integrating automation, AI, IoT, and Industry 4.0 concepts in CMM systems. Industries looking to answer modern manufacturing's demand will make it so these trends influence the market and yield a more precise and efficient solution to quality control.

• Integration of CMM with Automated Production Lines: This is one of the most crucial trends in the industry, including integration of CMMs with automated production lines. This allows manufacturers to measure continuously during and through the production process, reduce downtime, and improve efficiency. Automation of processes ensures that consistency meets quality standards even as the operation is streamlined. Higher production rates are now demanded, and human error needs to be reduced. High-precision industries, such as automotive and aerospace, need something like this. As this trend advances, Fixed Bridge CMMs are nowadays designed to integrate cohesively with other manufacturing systems in use.
• Artificial Intelligence and Machine Learning: The integration of AI and machine learning into Fixed Bridge CMMs is now revolutionizing the process of measurement. AI enables the machines to automatically find errors and optimize measurement settings, keeping accuracy at its best and reducing manual intervention. Machine learning algorithms enable CMMs to adapt better to new measurement conditions and learn from past data, which improves reliability, speeds up operation, and reduces costs. AI-driven CMMs offer predictive maintenance, which can predict problems before they happen, minimizing downtime and maximizing productivity.
• Industry 4.0 and Smart CMMs: Industry 4.0 principles are significantly shaping the design of Fixed Bridge CMMs as manufacturers go for smart, connected systems offering real-time information and analysis. Smart CMMs, integrated with IoT devices, can be able to communicate to other systems in the production process for immediate feedback. These systems provide real-time quality control, minimizing the use of manual inspection and ensuring that the products are in accordance with the set standards during the production cycle. The industry 4.0 is making the market push for more sophisticated, connected, and intelligent CMM solutions.
• Growing Interest in Compact and Portable CMMs: Compact and portable CMMs are gaining more attention in industries where mobile inspection is required. The portable nature of these systems makes them applicable in demanding conditions, including site and field conditions. Industries that have portable CMMs highly use them for in-line and out-of-line inspections as they involve a lot of part inspection at the different stages of production and sometimes on the move. Fixed Bridge CMMs are becoming very popular in various industries because their designs are compact yet not sacrificing on precision and performance.
• Sustainability and Energy Efficiency: Sustainability is becoming a key consideration in the development of Fixed Bridge CMMs. Manufacturers are increasingly focused on designing energy-efficient systems that reduce power consumption without sacrificing performance. These efforts are aligned with global trends towards environmental responsibility and cost reduction. The focus on sustainability includes using recyclable materials, reducing waste, and optimizing power usage. As the industry adopts more energy-efficient solutions, manufacturers are able to reduce operational costs and contribute to global sustainability efforts.

These emerging trends are reshaping the fixed bridge CMM market by introducing more automation, connectivity, and efficiency into measurement processes. As industries increasingly demand faster, more accurate, and cost-effective solutions, these trends are pushing CMM manufacturers to innovate and integrate advanced technologies. The result is a shift towards smarter, more adaptable CMM systems capable of handling complex manufacturing processes and delivering real-time quality control.

Recent Developments in the Fixed Bridge CMM Market

There have been a number of key developments in the fixed bridge CMM market in recent years, driven by technological innovation and shifting industry requirements. These are primarily focused on the requirements for precision, automation, and greater integration with production processes. Companies are focusing on accuracy improvement, reducing measurement time, and increasing the overall efficiency of CMM systems.

• Development of Smart CMM Systems: Smart CMM systems is a new important development in the fixed bridge CMM market, as they introduce advanced sensors, AI, and IoT technologies in the system that would allow the system to conduct real-time data analysis and automatic feedback in measurements. The smart CMMs enhance quality control through real-time errors detection and necessary real-time adjustments. The inclusion of artificial intelligence and machine learning in them has enhanced more accuracy and dependability, improving the manufacturing efficiency.
• Its integration with an automated production line: Another significant development is the integration of Fixed Bridge CMMs with automated production lines. This enables continuous measurement and adjustment of parts during the manufacturing process, thus reducing downtime and increasing efficiency. The integration of CMMs with robotics and other automated systems has streamlined quality control, allowing manufacturers to meet higher precision standards without compromising production speed. This development is particularly valuable in industries that require high-volume production, such as automotive and aerospace.
• Miniaturization and Portability of CMM Systems: Miniaturization and portability have been key trends in the development of Fixed Bridge CMMs. Smaller and more compact CMM systems are being designed to provide accurate measurements in space-constrained environments. Portable CMMs offer flexibility and convenience, allowing manufacturers to inspect parts on-site or at different stages of production. This trend has helped expand the application of CMM systems in industries like construction and automotive, where mobility and quick inspections are essential.
• Better Energy Efficiency: The concept of energy efficiency is beginning to play an important role in the design of Fixed Bridge CMM systems. Manufacturers are becoming increasingly interested in lowering power consumption without compromising measurement accuracy or speed. New models are designed to be energy saving, with newer motors and even more advanced power management systems for the overall benefit of reducing environmental impacts due to CMM operations. Such development aligns with global goals on sustainability while cutting down operational costs for manufacturers.
• Advanced Materials for Improved Strength: Advanced materials are increasingly being used in the construction of Fixed Bridge CMMs, which are designed to be more durable and withstand harsh environments. These materials are not only lightweight but also resistant to vibrations, temperature fluctuations, and other environmental factors that could impact the accuracy of measurements. Therefore, CMM systems are becoming more reliable and capable of performing in a wider range of conditions, making them suitable for a broader array of industries.

These developments of recent times are driving the fixed bridge CMM market upward by increasing innovation, efficiency, and use of applications for CMM systems. Companies that adopt advanced technologies find themselves capable enough to meet increased requirements in precision in manufacturing, thereby ensuring quality product and reducing waste. The market is likely to continue the growth as such advancements spread across the industries.

Strategic Growth Opportunities in the Fixed Bridge CMM Market

The fixed bridge CMM market offers numerous strategic growth opportunities, especially for industries that make high-precision measurements. Manufacturing processes are undergoing changes, leading to an increase in demand for sophisticated CMM solutions. This can be a strong growth opportunity for applications. Such growth is encouraged by technological improvements, automation trends, and growing quality control consciousness.

• Automotive Industry: The automotive industry is one of the biggest growth areas for the fixed bridge CMM market. As manufacturers adopt more complex designs and production techniques, the requirements for more precise measurement systems have increased. CMMs are widely applied in automotive manufacturing to ensure that high-quality components are delivered under tough standards. Electric vehicles and autonomous driving technologies will result in larger demand opportunities for high-precision CMM systems.
• Aerospace Industry: The aerospace industry continues to drive demand for Fixed Bridge CMMs due to the need for high-precision measurement of components used in aircraft and spacecraft. CMMs are essential for ensuring the quality and safety of critical aerospace parts. As the aerospace sector embraces more advanced technologies and materials, the demand for specialized CMM systems capable of measuring complex geometries and high-performance materials is expected to grow. This represents a significant growth opportunity for CMM manufacturers.
• Electronics and Semiconductors Industry: Electronics and semiconductors form a huge market for Fixed Bridge CMM. These sectors require extreme precision in the measurement of their products, such as microchips and circuit boards that are made from other fragile parts of electronics. As the technology is advancing, the demand for high-accuracy, automated QC at the electronics manufacturing stage will continue to rise. This will also open an opportunity for CMM companies to increase their reach in capturing more of these emerging industries.
• Medical Device Manufacture: As the medical devices are more sophisticated and strict compliance with regulation at the production, the fixed bridge CMM market is an upward trend in a growing market. Accuracy in measurements would be very vital for every part made in implant products, surgical devices, and any diagnostic device manufacturing. This growing demand for medical devices is expected to increase the requirement for advanced CMM solutions as well.
• Energy and Power Generation: There is also scope for growth of Fixed Bridge CMMs in the energy and power generation industry. This is because the entire energy and power generation sector necessitates the high-precision measurement of various components used within power plants, turbines, etc. Demand will continue to increase for high-quality, reliable measurement tools with growing emphasis on renewable energy sources and modernization of power generation systems. Fixed Bridge CMM systems are ideal for inspecting large, complex components used in this sector, hence a promising area for expansion.

These strategic growth opportunities show that expansion in the fixed bridge CMM market can still be expected to grow further. With increasing industrial demands for high precision and automated manufacturing processes, CMM systems will increasingly have a role in quality control and efficiency. Therefore, by exploring these growth opportunities, manufacturers are likely to innovate even more to accommodate the needs of key sectors in the market.

Fixed Bridge CMM Market Driver and Challenges

Technological, economic, and regulatory factors drive the fixed bridge CMM market. The main drivers are the greater need for precision, advancements in automation, and the demand for quality control. However, high costs and complexity, alongside limited use among small and medium-sized enterprises, can pose a challenge to the growth of this market.

The factors responsible for driving the fixed bridge CMM market include:

1. Technological Advancements in CMM Systems: Technological developments have been driving the fixed bridge CMM market forward. Artificial intelligence, the Internet of Things, and machine learning have been contributing to major enhancements in CMM functionality so that measurements can be done with even more precision and accuracy. Smarter CMM systems that may be integrated into automated production lines are in greater demand across several industries.

2. Growing Demand for Accuracy in Production: As the manufacturing process becomes more complex, there is a growing need for precision in production. Automotive, aerospace, and electronics industries are highly dependent on Fixed Bridge CMMs to ensure the quality and accuracy of components. The increasing demand for higher quality standards is fueling the growth of the fixed bridge CMM market, as companies invest in advanced measurement systems to meet these demands.

3. Adoption of Automation and Industry 4.0: The adoption of automation and Industry 4.0 principles is another major driver in the fixed bridge CMM market. Manufacturers are including smart technologies and automation in production lines, hence the need for advanced CMM systems for monitoring and feedback purposes. This makes the demand increase for CMMs that fit into automated lines, thus efficient and with lower human error.

4. Increasing High-Precision Industries: The aerospace, automotive, and medical devices industries are expanding globally, and high-precision measurement tools are in demand. Fixed Bridge CMMs are a must in these industries to ensure that the components meet the required specifications. Continued growth in these industries is a strong driver for the fixed bridge CMM market.

5. Cost Reduction in CMM Manufacturing: The reduction in manufacturing costs for Fixed Bridge CMM systems is making these tools more accessible to a wider range of industries. As CMM manufacturers continue to innovate and streamline production, the cost of high-precision systems has decreased, making them more affordable for small and medium-sized enterprises (SMEs). This is expanding the market for Fixed Bridge CMMs across different sectors.

Challenges in the fixed bridge CMM market are:

1. High Initial Investment: Many companies are deterred by the huge upfront investment that must be incurred to buy a Fixed Bridge CMM. In the long run, precision and efficiency are definite advantages, but in the case of small manufacturers, such an initial investment can be very expensive. This challenge could restrict the deployment of CMM systems in certain industries or regions, especially developing economies.

2. Complexity and Skill Requirements: CMM systems in the modern age need highly professional operators and technicians. The necessity of exclusive training and expertise will be a constraint for companies that fail to afford high investment for their human resources. This challenge might also delay the acceptance of upgraded systems of advanced CMM in small businesses or sectors with limited technical know-how.

3. Limited Adoption in SMEs: Although large corporations have quickly embraced fixed bridge CMMs, SMEs face major challenges in adopting such technologies. This is partly due to high costs and the need for high skill levels for implementing the technology. As SMEs represent a significant proportion of the worldwide manufacturing sector, their market potential for CMM manufacturers remains restricted.

These factors will determine the route on which the fixed bridge CMM market will grow. Even though technology development and demands for precision are pushing this market forward, several challenges such as its high initial costs and skill requirements act as deterrents. To overcome these challenges is necessary if the market is to fulfill its full potential and continue growing.

List of Fixed Bridge CMM Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies fixed bridge CMM companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the fixed bridge CMM companies profiled in this report include-

• Hexagon
• Mitutoyo
• Zeiss
• FARO
• Nikon
• Werth
• Wenzel
• Tokyo Seimitsu
• Coord3
• Leader Metrology

Fixed Bridge CMM Market by Segment

The study includes a forecast for the global fixed bridge CMM market by type, application, and region.

Fixed Bridge CMM Market by Type [Value from 2019 to 2031]:

• Small and Medium
• Large

Fixed Bridge CMM Market by Application [Value from 2019 to 2031]:

• Automotive
• Aerospace
• Heavy Machinery
• Medical
• Others

Fixed Bridge CMM Market by Region [Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Fixed Bridge CMM Market

The Fixed Bridge Coordinate Measuring Machine (CMM) market has experienced tremendous growth and innovation in recent years in a number of key countries. This advancement has been driven mainly by the need for precision in manufacturing and quality control, particularly in the automotive, aerospace, and heavy machinery industries. As technological advancements continue to evolve, countries like the United States, China, Germany, India, and Japan are experiencing unique developments in their fixed bridge CMM markets. Each of these countries is implementing new solutions and improving their CMM technologies to address the increasing demand for accurate measurements and efficiency in production lines.

• United States: The fixed bridge CMM market, in the US, is increasing at a rapid phase, driven forward by automation as well as a wave of technological advancements in its digitalization, where smart systems, with AI coupled with IoT support, have added to the significantly improved efficiency scale of measurement processing. These offer greater accuracy by minimizing human involvement and error probabilities. The high standards of quality demanded in aerospace and automotive industries have spurred the growth of high-precision CMM systems. The US market also focuses on integrating CMMs with larger production lines, streamlining manufacturing workflows, and ensuring product consistency.
• China: China is experiencing rapid expansion in the fixed bridge CMM market, with significant investments in advanced manufacturing technologies. The country's industrial modernization and smart manufacturing push has been driving the demand for more precise and efficient measuring solutions. Being one of the largest players in the automotive and electronics industries, China is seeing a growing need for quality control and precision in production. The focus of local companies is increasingly on developing CMMs specific to the needs of the industry in the region while collaborating with international players for innovation. In addition, Chinese government efforts at automation in the manufacturing sector are likely to make Fixed Bridge CMM systems take off even more rapidly.
• Germany: Germany continues to be at the forefront in the fixed bridge CMM market, with its emphasis on precision engineering and quality manufacturing. A strong automotive and aerospace sector of the country generates significant demand for advanced measurement systems. German companies are infusing AI, ML, and robotics technologies into CMMs in an effort to optimize speed, accuracy, and productivity. Moreover, its focus on Industry 4.0 enables German smart CMMs, especially the ability of CMM systems to work out and implement analytics and real-time feedback at shop floors and with production systems to achieve this, hence contributing to continued dominance by German players in global market CMM share.
• India: The fixed bridge CMM market in India is growing, influenced by the high growth rate of the manufacturing industry and an ever-increasing focus on quality control. Automotive and aerospace industries are primarily driving the demand for advanced measurement systems. In the quest for global quality, Indian manufacturers increasingly rely on high-precision CMM technologies to guarantee precision and minimal defects. The government's "Make in India" program boosts the idea behind the creation of domestic manufacturing capabilities, hence is bound to fuel the CMM market further. Automation and digitalization are going to be the essentials within India's fixed bridge CMM market.
• Japan: Japan is head of the list when it comes to fixed bridge CMM market with its tendency towards innovative and high-tech manufacturing ideas. Automotive, electronics, and robotics are some of the largest consumers of Fixed Bridge CMM systems in the country. The need for precision has only been increasing day by day. Japanese companies are now incorporating the latest technologies like AI and IoT into their CMM systems to improve performance and minimize downtime. Industry 4.0 in Japan is also promoting the creation of smart factories where CMM systems are integral to maintaining product quality. The integration of technological innovation with a strong manufacturing base has made Japan a leading country in the global CMM market.

Features of the Global Fixed Bridge CMM Market

Market Size Estimates: Fixed bridge CMM market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.

Segmentation Analysis: Fixed bridge CMM market size by type, application, and region in terms of value ($B).

Regional Analysis: Fixed bridge CMM market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different type, application, and regions for the fixed bridge CMM market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the fixed bridge CMM market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the fixed bridge CMM market by type (small and medium and large), application (automotive, aerospace, heavy machinery, medical, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Fixed Bridge CMM Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2019 to 2031

• 3.1. Macroeconomic Trends (2019-2024) and Forecast (2025-2031)
• 3.2. Global Fixed Bridge CMM Market Trends (2019-2024) and Forecast (2025-2031)
• 3.3: Global Fixed Bridge CMM Market by Type
  • 3.3.1: Small and Medium
  • 3.3.2: Large
• 3.4: Global Fixed Bridge CMM Market by Application
  • 3.4.1: Automotive
  • 3.4.2: Aerospace
  • 3.4.3: Heavy Machinery
  • 3.4.4: Medical
  • 3.4.5: Others

4. Market Trends and Forecast Analysis by Region from 2019 to 2031

• 4.1: Global Fixed Bridge CMM Market by Region
• 4.2: North American Fixed Bridge CMM Market
  • 4.2.1: North American Market by Type: Small and Medium and Large
  • 4.2.2: North American Market by Application: Automotive, Aerospace, Heavy Machinery, Medical, and Others
• 4.3: European Fixed Bridge CMM Market
  • 4.3.1: European Market by Type: Small and Medium and Large
  • 4.3.2: European Market by Application: Automotive, Aerospace, Heavy Machinery, Medical, and Others
• 4.4: APAC Fixed Bridge CMM Market
  • 4.4.1: APAC Market by Type: Small and Medium and Large
  • 4.4.2: APAC Market by Application: Automotive, Aerospace, Heavy Machinery, Medical, and Others
• 4.5: ROW Fixed Bridge CMM Market
  • 4.5.1: ROW Market by Type: Small and Medium and Large
  • 4.5.2: ROW Market by Application: Automotive, Aerospace, Heavy Machinery, Medical, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Fixed Bridge CMM Market by Type
  • 6.1.2: Growth Opportunities for the Global Fixed Bridge CMM Market by Application
  • 6.1.3: Growth Opportunities for the Global Fixed Bridge CMM Market by Region
• 6.2: Emerging Trends in the Global Fixed Bridge CMM Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Fixed Bridge CMM Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Fixed Bridge CMM Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Hexagon
• 7.2: Mitutoyo
• 7.3: Zeiss
• 7.4: FARO
• 7.5: Nikon
• 7.6: Werth
• 7.7: Wenzel
• 7.8: Tokyo Seimitsu
• 7.9: Coord3
• 7.10: Leader Metrology