한글목차

코팅 드럼 동향 및 전망

세계 코팅 드럼 시장의 미래는 식음료, 바이오의약품, 화학 시장에 기회가 있을 것으로 보입니다. 세계 코팅 드럼 시장은 2024년부터 2030년까지 연평균 5.3%의 성장률을 보일 것으로 예상됩니다. 이 시장의 주요 촉진요인은 식품 가공 및 제약 응용 분야에 대한 수요 증가, 제약 및 건강보조식품 산업의 성장, 제조 공정의 품질과 효율성에 대한 관심 증가입니다.

• Lucintel의 예측에 따르면, 유형별로는 매끄러운 표면이 예측 기간 동안 높은 성장세를 보일 것으로 예상됩니다.
• 용도별로는 식음료가 높은 성장세를 보일 것으로 예상됩니다.
• 지역별로는 아시아태평양이 예측 기간 동안 가장 높은 성장을 보일 것으로 예상됩니다.

코팅 드럼 시장의 전략적 성장 기회

코팅 드럼 시장에는 주로 최종 용도에 따라 많은 전략적 성장 기회가 있습니다. 업계에서 발판을 마련하고 새로운 발전을 활용하고자 하는 제조업체는 이러한 기회를 파악하는 것이 중요합니다.

• 항공우주 산업 : 항공우주 산업은 경량화 및 내구성 향상을 위해 고성능 코팅이 필수적이기 때문에 코팅 드럼 시장에 큰 기회가 있습니다. 이 산업은 고성능 코팅 응용 분야에 대한 접근성을 제공하고 코팅 재료 배합의 혁신을 촉진합니다.
• 자동차 응용 분야 : 자동차 산업이 자동차 표면을 위한 고급 코팅에 점점 더 중점을 두고 있기 때문에 코팅 드럼 공급 사업에는 기회가 있습니다. 이 경쟁이 치열한 시장에서는 표면 외관을 개선하는 보호 코팅의 개발이 요구되고 있습니다.
• 전자 분야 : 코팅된 전자부품에 대한 수요 증가는 코팅 드럼 시장에 전망을 가져다 줍니다. 각 제조업체는 전기 절연성과 내구성을 향상시키는 코팅 시스템을 개발하여 전자 시장의 요구에 효과적으로 대응할 수 있습니다.
• 산업용 코팅 : 중장비 및 장비의 코팅 시장이 있는 산업용 코팅 분야는 코팅 드럼 제조업체에 대한 전망이 열려 있습니다. 따라서 열악한 환경에서도 견딜 수 있는 내구성이 강한 도료가 필요하며, 더 나은 코팅 솔루션에 대한 수요가 증가하고 있습니다.
• 건설 산업 : 건설 산업은 계속 확장되고 있으며, 보호 및 장식용 도료에 사용되는 코팅 드럼에 대한 기회를 창출하고 있습니다. 이 수요는 건축자재의 효과적인 표면 보호와 미적 감각을 향상시키는 폴리머 기반 코팅 시스템 생산을 통해 충족시킬 수 있습니다.

코팅 드럼 시장의 이러한 전략적 성장 기회는 기술 혁신을 촉진하고 다양한 분야에서 시장 활용을 확대함으로써 업계에 영향을 미칠 것입니다. 이해관계자들은 이러한 기회를 포착하여 경쟁력을 강화하고 시장 성장을 촉진해야 합니다.

코팅드럼 시장의 촉진요인 및 과제

코팅 드럼 시장은 시장 촉진요인 및 과제에 노출되어 그 진화에 영향을 미치고 있습니다. 여기에는 신기술, 경제 환경, 산업 관련 정치 활동 등이 포함됩니다.

코팅 드럼 시장을 주도하는 요인은 다음과 같습니다.

• 기술의 발전 : 코팅 제조업체들이 코팅 드럼 기술 향상에 주력하면서 보다 효과적이고 신뢰할 수 있는 제품 개발이 필요하게 되었습니다. 제조업체들은 항공우주, 자동차 등의 분야에서 새로운 요구 사항을 충족시키기 위해 새로운 특성을 가진 신소재를 생산하기 위해 노력하고 있습니다.
• 지속가능한 솔루션에 대한 수요 증가 : 소비자의 인식 변화로 인해 제조업체는 친환경 제품을 우선순위에 두는 것이 필수적입니다. VOC가 적고 환경적으로 안전한 페인트에 대한 요구가 증가하고 있으며, 이러한 기준을 충족하는 솔루션을 찾는 것이 기업의 경쟁력 향상으로 이어집니다.
• 주요 산업의 성장 : 항공우주, 자동차, 전자 등 주요 산업의 성장도 코팅 드럼에 대한 시장 수요를 견인하고 있습니다. 이러한 산업의 성장과 함께 품질, 전문성 및 다양성 측면에서 특정 유형의 코팅에 대한 수요도 증가하여 제조업체의 성장을 가능하게 합니다.
• 도시화 및 인프라 개발 : 개발도상국의 급속한 도시화 및 인프라 개발은 정교한 도료에 대한 수요 증가로 이어지고 있습니다. 건설 활동이 증가함에 따라 제품의 성능과 내구성을 향상시키는 우수한 품질의 코팅 드럼에 대한 수요가 증가하여 성장 기회가 확대되고 있습니다.

코팅 드럼 시장의 과제는 다음과 같습니다.

• 치열한 경쟁 : 코팅 드럼 시장의 경쟁은 꾸준히 증가하고 있으며, 많은 기업들이 시장 점유율을 차지하기 위해 경쟁하고 있습니다. 과도한 경쟁은 가격 인하와 수익률 하락을 초래할 수 있으며, 각 업체는 제품 포지셔닝을 변경하고 제품 라인업을 강화해야 합니다.
• 공급망 혼란 : 불황과 같은 세계 위기는 전쟁과 같은 지역적 위기와 함께 원자재의 안정적인 공급원에 악영향을 미치고 생산 비용에 영향을 미칠 수 있습니다. 제조업체는 제품 품질을 보장하고 납기를 지키면서 이러한 문제를 해결해야 합니다.
• 규제 준수 : 제품 및 환경 관련 규제의 증가는 제조업체에게 장벽이 되고 있습니다. 이러한 규제를 준수하기 위해서는 R&D와 품질 관리에 지속적인 노력을 기울여야 하며, 이는 자원을 압박하고 성장에 제약이 되고 있습니다.

이러한 시장 촉진요인과 과제는 코팅 드럼 시장을 형성하고 전략을 추진하며 투자 결정의 방향을 정하고 있습니다. 이러한 시장 동향은 각각 이해 관계자에게 위험을 수반합니다.

목차

제1장 주요 요약

제2장 세계의 코팅 드럼 시장 : 시장 역학

• 소개, 배경, 분류
• 공급망
• 업계 성장 촉진요인과 과제

제3장 2018년부터 2030년까지 시장 동향과 예측 분석

• 거시경제 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 코팅 드럼 시장 동향(2018-2023년)과 예측(2024-2030년)
• 유형별 : 세계의 코팅 드럼 시장
  • 매끄러운 표면
  • 골이 있는 표면
• 용도별 : 세계의 코팅 드럼 시장
  • 식품 및 음료
  • 바이오의약품
  • 화학제품
  • 기타

제4장 2018년부터 2030년까지 지역별 시장 동향과 예측 분석

• 지역별 세계의 코팅 드럼 시장
• 북미의 코팅 드럼 시장
• 유럽의 코팅 드럼 시장
• 아시아태평양의 코팅 드럼 시장
• 기타 지역의 코팅 드럼 시장

제5장 경쟁 분석

• 제품 포트폴리오 분석
• 운영 통합
• Porter's Five Forces 분석

제6장 성장 기회와 전략 분석

• 성장 기회 분석
  • 세계의 코팅 드럼 시장의 유형별 성장 기회
  • 세계의 코팅 드럼 시장의 용도별 성장 기회
  • 세계의 코팅 드럼 시장의 지역별 성장 기회
• 세계의 코팅 드럼 시장 최신 동향
• 전략 분석
  • 신제품 개발
  • 세계의 코팅 드럼 시장 생산능력 확대
  • 세계의 코팅 드럼 시장 합병, 인수, 합작투자
  • 인증과 라이선싱

제7장 주요 기업 개요

• PPM Technologies
• Glatt
• Applied Chemical Technology
• Heat and Control
• Axis Automation
• PLP Systems
• Royce Metal Products

영문목차

Coating Drum Trends and Forecast

The future of the global coating drum market looks promising with opportunities in the food & beverage, biopharmaceutical, and chemical markets. The global coating drum market is expected to grow with a CAGR of 5.3% from 2024 to 2030. The major drivers for this market are increasing demand for food processing and pharmaceutical applications, growth in the pharmaceutical and nutraceutical industries, and rising focus on quality and efficiency in manufacturing processes.

• Lucintel forecasts that, within the type category, smooth surface is expected to witness higher growth over the forecast period.
• Within the application category, food & beverage is expected to witness higher growth.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Coating Drum Market

The Coating Drum market is influenced by several emerging trends that correspond with changing patterns in technology, consumer preferences, and environmental concerns. These trends are altering the status quo and competitive practices in the sector

• Sustainability Initiatives: The market favors green practices, where more materials are recovered and less energy is used in the manufacturing of coating drums. There is consumer demand and legal requirements for green products that drive this trend. Sustainable efforts not only improve corporate image but also assist businesses in adhering to international standards.
• Smart Technology Integration: The trend of integrating IoT and smart technology into coating drums is changing production methods. Such technologies allow for the monitoring of production systems as well as the collection of information to enhance manufacturers' efficiency. This trend supports operational and production efficiencies, decreases waste, and improves product quality, meeting the demands of a slowly shifting market.
• Customization and Flexibility: The solution to customer problems is not the same for everyone, and clients have individual requirements for coatings. Therefore, there is a trend toward designing coatings on demand. Manufacturers are focusing on producing multifunctional coating drums that apply to several materials and processes. This approach enables companies to provide quicker and easier solutions for their customers, helping to increase their market share.
• Advanced Coating Materials: Domestic investment in advanced composite coating materials is growing in the coating drum market. Novel developments in nanomaterials and special-purpose coatings offer much more efficient and long-lasting solutions. Improvements to coated products are being made to meet the growing needs of these industries.
• Automation and Robotics: The use of automation and robotics in coating processes is gaining acceptance. These systems reduce the amount of physical labor required while enhancing the speed and uniformity of production. This is particularly evident among manufacturers aiming to gain a competitive advantage by seeking efficient production due to high demand.

To conclude, many of these developments are positively affecting the coating drum market as they enhance technology and customization while promoting sustainability. Every stakeholder must be ready for these emerging trends to remain competitive and address the needs of changing consumers.

Recent Developments in the Coating Drum Market

The changes made recently within the coating drum market have pointed to a current trend characterized by the adoption of advanced technologies, sustainable practices and processes, and operational efficiency. Consumer needs and legal obligations are the causes of these developments; as a result, the industry becomes more competitive and innovative.

• Development of Eco-Friendly Drums: Manufacturers are paying more attention to the production of coating drums made from green materials. Such development is consistent with the global aim of minimizing adverse emissions and complying with stringent laws, thus creating brand equity and appealing to environmentally conscious consumers.
• Automation in Manufacturing: There is a growing trend toward the application of automation technology in the manufacturing of coating drums. Synchronized activities reduce errors caused by personnel and increase productivity when combined with mechanized tasks. This transformation is imperative to meet the increasing demand for goods and the need for quality in the industry.
• Introduction of Smart Coating Solutions: The emergence of smart coating solutions enabled by the Internet of Things capabilities allows for monitoring and controlling during the painting process, correlating with the conventional use of the solution. This leads to an increase in both quality and speed, enabling companies to maximize production while minimizing losses.
• Expansion of R&D Investments: Companies are increasing their investment levels to gain a competitive advantage in coating drum technologies in the future. This focus on R&D and innovation is critical as it coincides with changes in the market landscape, requiring new materials and processes to meet these demands.
• Global Supply Chain Optimization: Coating equipment manufacturing companies are undertaking supply chain optimization measures to increase efficiency and lower costs. The companies aim to source suppliers from various regions and implement just-in-time inventory management strategies, improving agility and flexibility in response to market changes.

In a nutshell, these recent developments are influencing the coating drum industry regarding new ideas, environmentalism, and improved functionality. Companies should take advantage of these developments, as they are imperative for remaining relevant in the market and responding to the changing needs of clientele.

Strategic Growth Opportunities for Coating Drum Market

The coating drums market has many strategic growth opportunities primarily based on critical end-use applications. It is important to pinpoint these opportunities for manufacturers who aspire to strengthen their foothold in the industry and take advantage of emerging developments.

• Aerospace Industry: There are significant opportunities in the coating drum market due to the demand for high-performance coatings in the aerospace industry, as these coatings are essential for weight savings and durability improvements. This industry provides access to high-performance coating applications, which stimulate innovations in the formulation of coating materials.
• Automotive Applications: There are opportunities in the coating drum supply business concerning the automotive industry, as it increasingly focuses on advanced coatings for automobile surfaces. There is a need for the development of protective coatings that also enhance the appearance of surfaces, which is desirable in this highly competitive market.
• Electronics Sector: The increasing demand for coated electronic components presents prospects in the coating drum market. Manufacturers can innovate and create coating systems that enhance electrical insulation and durability, responding effectively to the needs of the electronics market.
• Industrial Coatings: There are prospects for coating drum producers in the industrial coatings sector, where there is a market for coatings of heavy machinery and equipment. This has led to a significant need for durable coatings that can withstand extreme environments, highlighting the demand for better coating solutions.
• Construction Industry: The construction industry continues to expand, creating opportunities for coating drums used in protective and decorative coatings. This demand can be fulfilled through the production of polymer-based coating systems that provide effective surface protection and aesthetic enhancement of building materials.

These strategic growth opportunities in the coating drum market impact the industry by driving innovations and expanding market use across different sectors. Stakeholders should seize these opportunities to enhance competitiveness and foster market growth.

Coating Drum Market Driver and Challenges

The coating drum market is subject to drivers and challenges that influence its evolution. These include new technologies, the economic environment, and any political activities that are relevant to the industry.

The factors responsible for driving the coating drum market include:

• Technological Advancements: Coating manufacturers' focus on improving coating drum technologies necessitates the development of more effective and reliable products. Manufacturers are working towards producing novel materials with improved properties to meet emerging requirements in fields such as aerospace and automotive.
• Increasing Demand for Sustainable Solutions: The changing attitudes among consumers make it imperative for manufacturers to prioritize eco-friendliness. The desire for low VOC and environmentally safe coatings is increasing, encouraging businesses to find solutions that meet these standards, thus improving their competitiveness.
• Growth of Key Industries: The growth of key industries such as aerospace, automotive, and electronics also drives market demand for coating drums. With the growth of these industries, the demand for certain types of coatings in terms of quality, specialization, and variety also increases, allowing for the growth of manufacturers.
• Urbanization and Infrastructure Development: The rapid rate of urbanization and infrastructure development in developing regions is leading to an increased need for sophisticated coatings. With the emergence of construction activities, there is a need for superior-quality coating drums that enhance product performance and durability, opening up growth opportunities.

Challenges in the coating drum market include:

• Intense Competition: Competition in the coating drum market is steadily increasing, with many players vying for market share. Excessive competition may result in price cuts and lower profit margins than companies aim for, forcing them to reposition their products and enhance their offerings.
• Supply Chain Disruptions: Global crises, such as recessions, coupled with local crises, like wars, can adversely affect reliable sources of raw materials, thus impacting production costs. Manufacturers need to address these issues while ensuring product quality and meeting deadlines, which calls for improved supply chain systems.
• Regulatory Compliance: The increasing number of product and environmental regulations poses barriers for manufacturers. To comply with these rules, continuous efforts must be directed toward R&D and quality management, straining resources and creating constraints to growth.

These drivers and challenges shape the coating drum market, driving strategies and directing investment decisions. Each of these market trends carries risks for stakeholders.

List of Coating Drum Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies coating drum companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the coating drum companies profiled in this report include-

• PPM Technologies
• Glatt
• Applied Chemical Technology
• Heat and Control
• Axis Automation
• PLP Systems
• Royce Metal Products

Coating Drum by Segment

The study includes a forecast for the global coating drum market by type, application, and region.

Coating Drum Market by Type [Analysis by Value from 2018 to 2030]:

• Smooth Surface
• Ribbed Surface

Coating Drum Market by Application [Analysis by Value from 2018 to 2030]:

• Food & Beverage
• Biopharmaceutical
• Chemical
• Others

Coating Drum Market by Region [Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Coating Drum Market

Technology has enhanced the growth rate of the coating drum market due to unmet demand for improved coatings and sustainability. Key market players in the United States, China, Germany, India, and Japan are improving their manufacturing processes and the products they offer to meet the changing market. This changing scenario indicates a trend toward increased automation, customization, and environmentally friendly processes; therefore, further growth of the coating drum market is expected.

• United States: The market for coating drums in America is evolving toward the automation of most coating processes to improve efficiency and reduce waste. The use of smart coating drums featuring IoT technology is finding increasing applications since they allow for real-time changes in how the coating is applied. This advancement meets regulatory expectations relating to environmental sustainability, attracting clients to applications that satisfy ecologically friendly standards.
• China: The coating drum market in China is rising due to increasing industrialization and the need for sophisticated manufacturing. Companies in the country are allocating funds toward R&D to design coating drums that prioritize high efficiency and low material waste. With the government promoting green manufacturing standards, the industry is shifting towards greener technologies; thus, China will remain one of the most promising markets in the world.
• Germany: Germany continues to lead in the development of coating drum technology, with a constant emphasis on precision and quality. Recent developments include the introduction of multi-purpose, economically efficient coating drums that accommodate diverse materials and coatings. Concerns about the environmental impact of manufacturing have encouraged innovations that improve energy efficiency, allowing German manufacturers to reduce CO2 emissions while adhering to strict EU regulations.
• India: The Indian coating drum market is experiencing significant changes, with many local manufacturers upgrading their production plants. The use of sophisticated technology, such as automation and real-time monitoring systems, is enhancing operational efficiency. With increasing demand for quality coatings, Indian manufacturers are improving product performance to compete in the global market.
• Japan: The coating drum market in Japan is highly competitive, driven by strong demand for R&D toward the launch of new coating drums and materials that incorporate innovative features. Firms are discovering new ways to formulate substrates and coatings that add value and functionality without harming the environment. The concept of incorporating intelligent technologies in coating processes is also becoming popular, as it enhances production accuracy and improves output quality.

Features of the Global Coating Drum Market

Market Size Estimates: Coating drum market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Coating drum market size by type, application, and region in terms of value ($B).

Regional Analysis: Coating drum market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different type, application, and regions for the coating drum market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the coating drum market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the coating drum market by type (smooth surface and ribbed surface), application (food & beverage, biopharmaceutical, chemical, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Coating Drum Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global Coating Drum Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global Coating Drum Market by Type
  • 3.3.1: Smooth Surface
  • 3.3.2: Ribbed Surface
• 3.4: Global Coating Drum Market by Application
  • 3.4.1: Food & Beverage
  • 3.4.2: Biopharmaceutical
  • 3.4.3: Chemical
  • 3.4.4: Others

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global Coating Drum Market by Region
• 4.2: North American Coating Drum Market
  • 4.2.1: North American Market by Type: Smooth Surface and Ribbed Surface
  • 4.2.2: North American Market by Application: Food & Beverage, Biopharmaceutical, Chemical, and Others
• 4.3: European Coating Drum Market
  • 4.3.1: European Market by Type: Smooth Surface and Ribbed Surface
  • 4.3.2: European Market by Application: Food & Beverage, Biopharmaceutical, Chemical, and Others
• 4.4: APAC Coating Drum Market
  • 4.4.1: APAC Market by Type: Smooth Surface and Ribbed Surface
  • 4.4.2: APAC Market by Application: Food & Beverage, Biopharmaceutical, Chemical, and Others
• 4.5: ROW Coating Drum Market
  • 4.5.1: ROW Market by Type: Smooth Surface and Ribbed Surface
  • 4.5.2: ROW Market by Application: Food & Beverage, Biopharmaceutical, Chemical, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Coating Drum Market by Type
  • 6.1.2: Growth Opportunities for the Global Coating Drum Market by Application
  • 6.1.3: Growth Opportunities for the Global Coating Drum Market by Region
• 6.2: Emerging Trends in the Global Coating Drum Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Coating Drum Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Coating Drum Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: PPM Technologies
• 7.2: Glatt
• 7.3: Applied Chemical Technology
• 7.4: Heat and Control
• 7.5: Axis Automation
• 7.6: PLP Systems
• 7.7: Royce Metal Products