한글목차

항공기 엔진용 컴프레서 동향 및 전망

항공기 엔진용 컴프레서 세계 시장은 2024년부터 2030년까지 연평균 6.2%의 성장률을 보이며 2030년에는 약 159억 달러에 달할 것으로 예상됩니다. 이 시장의 주요 촉진요인은 신형 항공기에 대한 수요 증가, 엄격한 배기가스 규제, 재료 및 기술 발전입니다. 항공기 엔진용 컴프레서 세계 시장의 미래는 상업용 및 비즈니스 항공기 시장과 군용 항공기 시장에서 기회가 있고 유망한 것으로 보입니다.

• Lucintel은 엔진 성능 향상, 배기가스 배출량 감소 및 항공기의 전반적인 효율성 향상에 필수적이기 때문에 유형별로는 헤비 듀티가 예측 기간 동안 가장 큰 부문으로 남을 것으로 예상했습니다.
• 용도별로는 공항 네트워크의 확대와 연결성 향상으로 민간 및 비즈니스 항공기가 높은 성장세를 보일 것으로 예상됩니다.
• 지역별로 보면 유럽은 헬리콥터, 군용기, 상용기, 항공기 엔진 부품을 대량으로 생산하는 대형 항공기 제조업체가 존재하기 때문에 예측 기간 동안에도 가장 큰 지역으로 남을 것으로 보입니다.

항공기 엔진용 컴프레서 시장의 전략적 성장 기회

항공기 엔진용 컴프레서 시장은 기술 발전과 연료 효율 및 성능에 대한 요구가 높아지면서 상당한 성장세를 보이고 있습니다. 항공기가 계속 진화하는 가운데, 몇 가지 주요 응용 분야는 압축기 제조업체에게 전략적 기회를 제공하고 있습니다. 이러한 기회는 설계, 재료 및 시장 특성의 변화로 인해 발생하며, 기업은 항공우주 산업의 변화하는 요구를 충족시키면서 새로운 기술을 채택할 수 있습니다.

• 고성능 엔진용 첨단 소재 : 세라믹 매트릭스 복합재료(CMC)는 압축기의 효율과 수명을 향상시키는 데 사용할 수 있는 첨단 소재입니다. CMC는 경량화 및 내열성 향상에 도움을 주어 연료 소비율과 성능을 향상시키며, 출력 밀도가 중요한 항공 분야에서 요구되는 고출력, 고강도, 고효율의 엔진을 만들 수 있습니다.
• 하이브리드 및 전기 항공기 엔진 : 압축기 설계는 하이브리드 및 전기 항공기 엔진의 보급에 대응해야 합니다. 기존 엔진과 비교하여 이러한 압축기는 고려해야 할 고유 한 작동 매개 변수가 있습니다. 그 결과, 하이브리드 전기 추진 시스템의 효율성을 높이고 성능을 향상시키기 위한 압축기 기술 혁신에 대한 요구가 높아지고 있으며, 이는 친환경 항공기로의 전환을 시사하고 있습니다.
• 연료 효율에 대한 관심 증가 : 항공기 엔진의 연비 향상에 대한 요구는 환경 규제 강화와 함께 연료 비용의 상승을 가져옵니다. 공기역학적 특성과 가변 형상과 같은 첨단 컴프레서 설계는 보다 효율적인 연료 연소에 기여하여 배출가스를 낮출 수 있습니다. 또한, 이러한 초점은 세계 지속가능성 목표에 부합하며, 특히 컴프레서 에너지 절약 기술에 투자하는 조직에 성장의 근거를 제공합니다.
• 차세대 엔진 설계 : 기어드 터보 팬과 오픈 로터 엔진을 포함한 차세대 엔진 아키텍처 개발에는 혁신적인 컴프레서 솔루션이 필요합니다. 따라서 다양한 속도와 압력에서 효율적으로 작동할 수 있는 컴프레서가 요구됩니다. 이러한 새로운 엔진 설계를 기반으로 컴프레서 기술을 개선하는 기업들은 첨단 항공우주 추진 시스템 시장의 확대에 따라 수익을 향상시킬 수 있습니다.
• 신흥 시장 및 리저널 항공기 : 지역 및 신흥국 시장의 확대로 저렴하고 효율적인 항공기 엔진에 대한 수요가 증가하고 있습니다. 소형 리저널 제트기 및 신흥국 시장에 적합한 압축기를 개발할 것으로 예상됩니다. 확장 가능하고 합리적인 가격의 컴프레서 기술에 집중하는 제조업체는 지역 항공사의 고유한 요구 사항을 이해함으로써 이러한 신흥 시장에 접근할 수 있습니다.

항공기 엔진용 컴프레서 시장은 재료의 발전, 하이브리드 및 전기 엔진, 연료 효율에 대한 관심, 차세대 엔진 설계, 지역 시장 확대로 인해 역동적으로 성장하고 있습니다. 각 기회는 기술 혁신을 촉진하고 일반적인 산업 동향을 반영하여 압축기 제조업체가 미래 수요를 충족하고 항공기의 전반적인 성능을 향상시킬 수 있도록 돕습니다.

항공기 엔진용 컴프레서 시장 활성화 요인 및 과제

항공기 엔진용 컴프레서 시장은 기술 발전, 경제 상황, 규제 변화 등 다양한 시장 촉진요인 및 과제에 의해 형성되고 있습니다. 이러한 요소들은 시장 역학에 큰 영향을 미치고 이 분야의 성장과 개척에 영향을 미칩니다. 이러한 요소들을 이해하는 것은 시장의 복잡성을 극복하고 새로운 기회를 활용하고자 하는 이해관계자들에게 매우 중요합니다.

항공기 엔진용 컴프레서 시장을 주도하는 요인은 다음과 같습니다.

• 기술 발전 : 기술 발전 : 고효율 경량 소재와 첨단 냉각 시스템 개발 등 압축기 기술의 끊임없는 혁신은 엔진 성능과 연비 효율을 향상시킵니다. 이러한 발전은 제조업체가 더 엄격한 배기가스 배출 기준을 충족하고 전체 항공기 성능을 향상시키는 데 도움이 되며, 고성능 압축기에 대한 수요를 촉진하고 있습니다.
• 항공 수요 증가 : 가처분 소득의 증가와 관광산업에 힘입어 전 세계 항공 여행이 증가함에 따라 새로운 항공기와 엔진 업그레이드의 필요성이 대두되고 있습니다. 항공사와 운항사들은 연료 효율을 높이고 운항 비용을 절감하기 위해 첨단 컴프레서를 장착한 최신 항공기에 투자하고 있으며, 이는 항공기 엔진용 컴프레서 시장을 확대시키고 있습니다.
• 군 및 방위비 : 전 세계 군 및 방위 예산의 증가는 엔진 및 컴프레서를 포함한 첨단 항공기 기술에 대한 투자 증가로 이어집니다. 군용 제트기 및 기타 방위 항공기의 성능 요건이 강화됨에 따라 더 높은 신뢰성과 효율성을 제공하는 고성능 컴프레서에 대한 수요가 증가하고 있습니다.
• 환경 규제 : 엄격한 환경 규제로 인해 제조업체들은 더 높은 연료 효율과 낮은 배기가스 배출 기준을 충족하는 압축기를 개발해야 하는 상황에 직면해 있습니다. 이러한 규제 압력은 기업이 세계 및 지역적 환경 요건을 준수하기 위해 노력하면서 혁신과 신기술 채택을 촉진합니다.
• 신흥 시장의 성장 : 신흥국들은 경제 성장과 연결성을 지원하기 위해 항공 인프라에 투자하고 항공기를 확장하고 있습니다. 이러한 확장은 새로운 항공사와 운항사가 운영을 강화하기 위해 첨단 비용 효율적인 기술을 찾고 있기 때문에 항공기 엔진과 압축기의 큰 시장을 창출할 수 있습니다.

항공기 엔진용 컴프레서 시장의 과제는 다음과 같습니다.

• 높은 개발 비용 : 첨단 항공기 엔진용 컴프레서 개발 및 생산에는 막대한 연구개발 비용이 소요됩니다. 기술 혁신, 테스트 및 인증과 관련된 높은 비용은 투자 기회를 제한하고 제조업체에 재정적 어려움을 초래하여 시장 성장에 영향을 미칠 수 있습니다.
• 규제 대응 : 배출가스 및 성능 기준에 대한 복잡하고 진화하는 규제 요건을 이해하는 것은 어려운 일입니다. 지역마다 다른 규제를 준수하기 위해서는 많은 자원과 적응이 필요하며, 이는 신제품을 신속하고 비용 효율적으로 시장에 출시하는 능력에 영향을 미칠 수 있습니다.
• 공급망 혼란 : 중요한 자재 및 부품 부족을 포함한 세계 공급망 혼란은 항공기 엔진용 컴프레서의 생산 및 납품 일정에 영향을 미칠 수 있습니다. 이러한 혼란은 지연과 비용 증가로 이어져 전체 시장의 안정성과 성장 전망에 영향을 미칠 수 있습니다.

목차

제1장 주요 요약

제2장 세계의 항공기 엔진용 컴프레서 시장 : 시장 역학

• 소개, 배경, 분류
• 공급망
• 업계 성장 촉진요인과 과제

제3장 2018년부터 2030년까지 시장 동향과 예측 분석

• 거시경제 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 항공기 엔진용 컴프레서 시장 동향(2018-2023년)과 예측(2024-2030년)
• 세계의 항공기 엔진용 컴프레서 시장(유형별)
  • 대형
  • 미디엄 듀티
  • 라이트 의무
• 세계의 항공기 엔진용 컴프레서 시장(용도별)
  • 민간항공기 및 비즈니스 항공기
  • 군용기
  • 기타

제4장 2018년부터 2030년까지 지역별 시장 동향과 예측 분석

• 지역별 항공기 엔진용 컴프레서 시장
• 북미의 항공기 엔진용 컴프레서 시장
• 유럽의 항공기 엔진용 컴프레서 시장
• 아시아태평양의 항공기 엔진용 컴프레서 시장
• 기타 리저널 항공기 엔진용 컴프레서 시장

제5장 경쟁 분석

• 제품 포트폴리오 분석
• 운영 통합
• Porter's Five Forces 분석

제6장 성장 기회와 전략 분석

• 성장 기회 분석
  • 세계의 항공기 엔진용 컴프레서 시장의 유형별 성장 기회
  • 세계의 항공기 엔진용 컴프레서 시장의 용도별 성장 기회
  • 세계의 항공기 엔진용 컴프레서 시장의 지역별 성장 기회
• 세계의 항공기 엔진용 컴프레서 시장 최신 동향
• 전략 분석
  • 신제품 개발
  • 세계의 항공기 엔진용 컴프레서 시장 생산능력 확대
  • 세계의 항공기 엔진용 컴프레서 시장 합병, 인수, 합작투자
  • 인증과 라이선싱

제7장 주요 기업 개요

• Bet Shemesh Engines
• Bharat Forge
• Compressed Air Systems
• EuroJet Turbo
• General Electric
• Honeywell
• IHI Aerospace
• JSC Klimov
• Melrose Industries
• MTU Aero Engines

영문목차

Aircraft Engine Compressor Trends and Forecast

The future of the global aircraft engine compressor market looks promising with opportunities in the commercial & business aircraft and military aircraft markets. The global aircraft engine compressor market is expected to reach an estimated $15.9 billion by 2030 with a CAGR of 6.2% from 2024 to 2030. The major drivers for this market are increasing demand for new aircraft, stringent emission regulations, and advancements in materials and technology.

• Lucintel forecasts that, within the type category, heavy duty will remain the largest segment over the forecast period because they are crucial for enhancing engine performance, reducing emissions, and increasing overall aircraft efficiency.
• Within the application category, commercial & business aircraft is expected to witness higher growth due to the growing airport network and improved connectivity.
• In terms of regions, Europe will remain the largest region over the forecast period due to the existence of significant aircraft manufacturers who produce a large amount of helicopters, military, commercial, and aviation engine parts.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Aircraft Engine Compressor Market

The market for aircraft engine compressors is changing dynamically due to the power of technology and the needs of a growing industry. The enhanced performance, efficiency gains, and environmental sustainability achieved by innovations introduced to aircraft engines are significant. With stricter environmental regulations, the aerospace industry is focused on fuel improvements as well as integrating advanced materials and designs. Understanding key trends will help stakeholders navigate this shifting landscape and capitalize on new opportunities.

• Advanced Materials and Coatings: Innovative materials such as ceramic matrix composites (CMCs) and advanced coatings are increasingly applied in compressors for higher temperature resistance and weight reduction. These materials ensure durability, allowing for high pressure ratios and elevated temperatures, thereby leading to improved engine output and fuel efficiency. They are used to meet environmental standards while reducing operational costs.
• Variable Geometry Compressors: Variable geometry compressors, which adjust their blade angles or other parameters according to system conditions, are becoming more prevalent. This allows for optimization of performance over different flight profiles, enhancing overall engine efficiency and decreasing fuel consumption rates. Through better adaptation of the compressor to varying flying conditions, this technology improves the overall performance of an engine and enhances its operational flexibility.
• Integration of Digital Technologies: Compressor operations have been completely transformed by digital technologies, including advanced sensors and data analytics. By analyzing real-time information from engines, it is possible to lead proactive maintenance, resulting in reduced downtime due to component maintenance; all these improvements enhance reliability within airline operations. Additionally, digital technologies facilitate the identification of compressors' optimal running conditions, thus achieving better results through faster record analysis, making engineering operations more efficient and safer than before.
• Hybrid and Electric Propulsion: The push towards hybrid and electric propulsion is to leading changes in compressor design. The need for compressors that can operate effectively with various power outputs and interfaces has emerged as a result. Designing compressors for hybrid and electric motors is crucial in advancing sustainable aviation technologies aimed at reducing the carbon footprint of aircraft operations.
• Enhanced Aerodynamic Designs: Improved aerodynamic designs have resulted in more efficient compressor geometries. Better blade shapes and optimized flow dynamics reduce drag while increasing compression efficiency. These design enhancements contribute to overall engine performance and align with the aerospace industry's goals for fuel economy and reduced emissions.

These emerging trends are significantly reshaping the market for aircraft engine compressors. Durability is boosted by advanced materials and coatings, while variable geometry compressors improve adaptability and efficiency. Digital technologies enable better monitoring and maintenance, and hybrid/electric propulsion necessitates innovative compressor designs. Enhanced aerodynamic designs contribute to fuel efficiency and performance. Thus, these trends impact aircraft engine compressors, making them more efficient, sustainable, and technologically advanced.

Recent Developments in the Aircraft Engine Compressor Market

The aircraft engine compressor market is experiencing significant changes driven by technological advancements, regulatory pressures, and evolving industry needs. Innovations focus on improving efficiency, reducing emissions, and enhancing overall performance. Key developments include advancements in materials and design, increased adoption of additive manufacturing, integration of advanced control systems, breakthroughs in high-bypass ratio engines, and a shift towards sustainable technologies. These trends are reshaping the market landscape, enhancing operational efficiency, and addressing environmental concerns.

• Advanced Materials and Design Innovations: The use of advanced materials such as ceramic matrix composites (CMCs) and titanium alloys is improving compressor efficiency and durability. These materials withstand higher temperatures and stresses, leading to enhanced performance and reduced maintenance costs. Their integration allows for lighter and more fuel-efficient engines, supporting airlines' goals of reducing operational expenses and environmental impact.
• Additive Manufacturing (3D Printing): Additive manufacturing is revolutionizing compressor component production by enabling complex geometries that enhance performance and reduce weight. This technology allows for rapid prototyping and customization, resulting in more efficient and cost-effective manufacturing processes. It accelerates development cycles and reduces lead times, contributing to faster deployment of innovative compressor designs.
• Advanced Control Systems Integration: Modern compressors increasingly incorporate sophisticated control systems that optimize performance and efficiency. These systems use real-time data to adjust compressor settings, improving fuel efficiency and reducing emissions. Enhanced control capabilities lead to more precise engine management, better adaptability to varying flight conditions, and improved operational efficiency.
• High-Bypass Ratio Engines: The shift towards high-bypass ratio engines is driven by their superior fuel efficiency and reduced noise levels. Compressors designed for these engines offer improved performance at lower fuel consumption rates. This trend aligns with environmental regulations and market demands for quieter, more eco-friendly aircraft, providing a competitive edge in the aviation industry.
• Sustainable Technologies and Green Initiatives: There is a growing focus on developing compressors that support sustainable aviation fuels (SAFs) and hybrid-electric propulsion systems. These technologies aim to lower carbon emissions and support the aviation industry's transition to greener alternatives. Investments in research and development are crucial for achieving long-term sustainability goals and meeting regulatory requirements.

These developments in the aircraft engine compressor market are driving significant improvements in efficiency, performance, and sustainability. Advanced materials and additive manufacturing enhance component performance and manufacturing flexibility. Integrating advanced control systems and adopting high-bypass ratio engines contribute to operational efficiency and environmental benefits. Meanwhile, the shift towards sustainable technologies reflects a broader industry commitment to reducing emissions and supporting greener aviation practices.

Strategic Growth Opportunities for Aircraft Engine Compressor Market

The aircraft engine compressor market is on the cusp of substantial growth due to technological advancements and increasing requirements for fuel efficiency and performance. As aviation continues to evolve, several major applications provide strategic opportunities for compressor manufacturers. These opportunities arise from changes in design, materials used, and market characteristics that enable companies to adopt new technologies while meeting the changing needs of the aerospace industry.

• Advanced Materials for High-Performance Engines: Ceramic matrix composites (CMCs) are advanced materials that can be used to improve the efficiency and longevity of compressors. They help reduce weight and enhance heat resistance, leading to improved fuel consumption rates and performance. The use of CMCs allows for the creation of strong and efficient engines with high power output that are demanded in aeronautics, where power density is critical.
• Hybrid and Electric Aircraft Engines: Compressor designs must respond to the growing prominence of hybrid and electric aircraft engines. Compared to traditional engines, these compressors have unique operating parameters that require consideration. Consequently, there is increased demand for innovation in compressor technology to enhance efficiency and increase performance within hybrid electric propulsion systems, signaling a shift toward environmentally friendly aviation.
• Increased Focus on Fuel Efficiency: The demand for better fuel economy in aircraft engines drives higher fuel costs, along with stricter environmental regulations. Advanced compressor designs, such as those with better aerodynamics or variable geometry, contribute to more efficient fuel burning and result in lower emissions. Moreover, this focus aligns with global sustainability goals and provides grounds for growth for organizations investing in energy-saving technologies, especially in compressors.
• Next-Generation Engine Designs: The development of next-generation engine architectures, including geared turbofans and open rotor engines, necessitates innovative compressor solutions. This calls for compressors that can operate effectively under varying speeds and pressures. Companies that modify their compressor technologies based on these new engine designs position themselves to enhance their bottom lines by taking advantage of the expanding market for advanced aerospace propulsion systems.
• Emerging Markets and Regional Aircraft: The rise in regional and developing markets presents a demand for affordable and efficient aircraft engines. There are prospects for creating compressors that suit smaller regional jets and developing markets. Manufacturers focusing on scalable, affordable compressor technologies can access these emerging markets by understanding the specific requirements of regional airlines.

The aircraft engine compressor market is experiencing dynamic growth due to material advancements, hybrid and electric engines, a focus on fuel efficiency, next-generation engine designs, and expanding regional markets. Each opportunity drives technological innovations and reflects general industry trends, thereby positioning compressor manufacturers to meet future demands and enhance overall aircraft performance.

Aircraft Engine Compressor Market Driver and Challenges

The aircraft engine compressor market is shaped by a variety of drivers and challenges, including technological advancements, economic conditions, and regulatory changes. These factors significantly impact market dynamics, influencing growth and development in the sector. Understanding these elements is crucial for stakeholders aiming to navigate the complexities of the market and capitalize on emerging opportunities.

The factors driving the aircraft engine compressor market include:

• Technological Advancements: Continuous innovation in compressor technology, such as the development of high-efficiency, lightweight materials and advanced cooling systems, enhances engine performance and fuel efficiency. These advancements help manufacturers meet stricter emission standards and improve overall aircraft performance, driving demand for more sophisticated compressors.
• Increased Air Travel Demand: Growing global air travel, driven by rising disposable incomes and tourism, fuels the need for new aircraft and engine upgrades. Airlines and operators are investing in modern aircraft equipped with advanced compressors to improve fuel efficiency and reduce operating costs, thereby expanding the market for aircraft engine compressors.
• Military and Defense Spending: Increased military and defense budgets globally lead to higher investments in advanced aircraft technology, including engine compressors. Enhanced performance requirements for military jets and other defense aircraft drive demand for high-performance compressors that offer greater reliability and efficiency.
• Environmental Regulations: Stringent environmental regulations push manufacturers to develop compressors that meet higher fuel efficiency and lower emission standards. This regulatory pressure drives innovation and the adoption of newer technologies, as companies strive to comply with global and regional environmental requirements.
• Growth in Emerging Markets: Emerging economies are investing in aviation infrastructure and expanding their fleets to support economic growth and connectivity. This expansion creates a significant market for aircraft engines and compressors, as new airlines and operators seek advanced, cost-effective technologies to enhance their operations.

Challenges in the aircraft engine compressor market include:

• High Development Costs: The development and production of advanced aircraft engine compressors involve substantial research and development expenses. High costs associated with innovation, testing, and certification can limit investment opportunities and pose financial challenges for manufacturers, potentially impacting market growth.
• Regulatory Compliance: Navigating complex and evolving regulatory requirements for emissions and performance standards can be challenging. Compliance with varying regulations across different regions requires significant resources and adaptation, impacting the ability to quickly and cost-effectively introduce new products to the market.
• Supply Chain Disruptions: Global supply chain disruptions, including shortages of critical materials and components, affect the production and delivery timelines of aircraft engine compressors. These disruptions can lead to delays and increased costs, impacting overall market stability and growth prospects.

The aircraft engine compressor market is influenced by key drivers such as technological advancements, rising air travel demand, increased defense spending, environmental regulations, and growth in emerging markets. However, challenges like high development costs, regulatory compliance, and supply chain disruptions pose significant hurdles. Balancing these drivers and challenges is crucial for market players to navigate the complex landscape, seize growth opportunities, and maintain a competitive advantage in the evolving aerospace sector.

List of Aircraft Engine Compressor Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies aircraft engine compressor companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the aircraft engine compressor companies profiled in this report include-

• Bet Shemesh Engines
• Bharat Forge
• Compressed Air Systems
• EuroJet Turbo
• General Electric
• Honeywell
• IHI Aerospace
• JSC Klimov
• Melrose Industries
• MTU Aero Engines

Aircraft Engine Compressor by Segment

The study includes a forecast for the global aircraft engine compressor by type, application, and region.

Aircraft Engine Compressor Market by Type [Analysis by Value from 2018 to 2030]:

• Heavy Duty
• Medium
• Light

Aircraft Engine Compressor Market by Application [Analysis by Value from 2018 to 2030]:

• Commercial & Business Aircrafts
• Military Aircrafts
• Others

Aircraft Engine Compressor Market by Region [Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Aircraft Engine Compressor Market

The market for compressors in airplane engines has been undergoing rapid change as technology advances, regulations evolve, and economic conditions shift. The United States, China, Germany, India, and Japan are among the main players innovating to improve performance, efficiency, and environmental sustainability. This summary showcases recent developments in these major markets and their contributions to the global aerospace industry.

• United States: Recent changes in the U.S. aircraft engine compressor market involve the use of advanced materials and additive manufacturing. Companies like GE Aviation have pioneered the application of ceramic matrix composites that improve heat resistance and efficiency. Furthermore, digital twin technology has advanced the optimization of compressor design and maintenance, leading to improved performance at lower operational costs.
• China: In China, significant strides have been made towards the development of high-pressure compressors for military and commercial aircraft. The goal is to increase thrust while reducing fuel consumption and carbon dioxide emissions. To compete with global leaders and achieve technological self-sufficiency in this sector, state-owned enterprises have invested heavily in R&D.
• Germany: Innovation in aerodynamics and noise reduction technologies defines the German market for aircraft engine compressors. MTU Aero Engines, among others, is working on advanced fan blade designs and materials that enhance fuel efficiency while minimizing environmental impact. Such collaborative projects with European aerospace entities also improve compressor performance and reliability.
• India: Developments within India's aerospace sector have led to growth in its aircraft engine compressor market. Industry players are focusing on upgrading existing technology to develop new components for both domestic and foreign markets. These initiatives aim to reduce import dependency while enhancing local manufacturing capabilities, fostering growth within the country's aerospace industry.
• Japan: Japan's market is characterized by advances in miniaturized lightweight compressors targeting next-generation airplanes. For instance, IHI Corporation is leading efforts to increase compressor efficiency while decreasing noise levels, also focusing on incorporating modern control systems to monitor the overall health of an engine, thus increasing reliability and performance.

Features of the Global Aircraft Engine Compressor Market

Market Size Estimates: Aircraft engine compressor market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Aircraft engine compressor market size by type, application, and region in terms of value ($B).

Regional Analysis: Aircraft engine compressor market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different type, application, and regions for the aircraft engine compressor market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the aircraft engine compressor market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the aircraft engine compressor market by type (heavy duty, medium, and light), application (commercial & business aircrafts, military aircrafts, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?
• ReportType

Table of Contents

1. Executive Summary

2. Global Aircraft Engine Compressor Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global Aircraft Engine Compressor Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global Aircraft Engine Compressor Market by Type
  • 3.3.1: Heavy Duty
  • 3.3.2: Medium
  • 3.3.3: Light
• 3.4: Global Aircraft Engine Compressor Market by Application
  • 3.4.1: Commercial & Business Aircrafts
  • 3.4.2: Military Aircrafts
  • 3.4.3: Others

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global Aircraft Engine Compressor Market by Region
• 4.2: North American Aircraft Engine Compressor Market
  • 4.2.1: North American Aircraft Engine Compressor Market by Type: Heavy Duty, Medium, and Light
  • 4.2.2: North American Aircraft Engine Compressor Market by Application: Commercial & Business Aircrafts, Military Aircrafts, and Others
• 4.3: European Aircraft Engine Compressor Market
  • 4.3.1: European Aircraft Engine Compressor Market by Type: Heavy Duty, Medium, and Light
  • 4.3.2: European Aircraft Engine Compressor Market by Application: Commercial & Business Aircrafts, Military Aircrafts, and Others
• 4.4: APAC Aircraft Engine Compressor Market
  • 4.4.1: APAC Aircraft Engine Compressor Market by Type: Heavy Duty, Medium, and Light
  • 4.4.2: APAC Aircraft Engine Compressor Market by Application: Commercial & Business Aircrafts, Military Aircrafts, and Others
• 4.5: ROW Aircraft Engine Compressor Market
  • 4.5.1: ROW Aircraft Engine Compressor Market by Type: Heavy Duty, Medium, and Light
  • 4.5.2: ROW Aircraft Engine Compressor Market by Application: Commercial & Business Aircrafts, Military Aircrafts, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Aircraft Engine Compressor Market by Type
  • 6.1.2: Growth Opportunities for the Global Aircraft Engine Compressor Market by Application
  • 6.1.3: Growth Opportunities for the Global Aircraft Engine Compressor Market by Region
• 6.2: Emerging Trends in the Global Aircraft Engine Compressor Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Aircraft Engine Compressor Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Aircraft Engine Compressor Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Bet Shemesh Engines
• 7.2: Bharat Forge
• 7.3: Compressed Air Systems
• 7.4: EuroJet Turbo
• 7.5: General Electric
• 7.6: Honeywell
• 7.7: IHI Aerospace
• 7.8: JSC Klimov
• 7.9: Melrose Industries
• 7.10: MTU Aero Engines