Pressure Sensitive Tapes Market Report by Type, Technology, Resin Type, Material Type, Application, and Region 2024-2032
세계의 감압 테이프(Pressure Sensitive Tapes) 시장 규모는 2023년 640억 달러에 달했습니다. IMARC Group은 향후 시장이 2032년까지 1,009억 달러에 달할 것으로 예상하고 있으며, 2024년과 2032년 사이에 5%의 CAGR을 나타낼 것으로 예측했습니다.
감압 테이프는 천, 종이, 플라스틱, 금속 등 유연한 소재의 한쪽 또는 양면에 접착제를 도포한 연속 스트립을 의미합니다. 점착제는 수지, 아크릴, 폴리아크릴레이트, 고무 등 천연 소재와 합성 소재의 조합으로 균일한 두께를 얻을 수 있습니다. 또, 유리 섬유나 직포·편포로 보강해, 높은 인장 강도와 내절창·내마모성을 갖게 한 제품도 있습니다. 이 테이프는 접착에 솔벤트, 물, 열이 필요 없으며 깨끗하고 건조한 표면에 최소한의 압력으로 붙일 수 있습니다. 현재 감압 테이프는 다양한 모양과 크기, 다양한 접착력으로 판매되고 있습니다.
감압 테이프는 가볍고 비용 효율적이며 충격과 전기에 강합니다. 이러한 특성 때문에 이러한 테이프는 씰, 라벨링, 산업 포장 및 기타 일반 용도에 널리 사용됩니다. 포장 산업에서는 카드 보드 및 용기 씰에 사용됩니다. 이 외에도 자동차 업계에서는 사이드 미러와 내장 부품, LED 라이트의 접합에 이용되고 있습니다. 또한 진동이나 소리의 저감, 조립 시간의 단축에도 도움이 됩니다. 항공우주 산업에서 감압 테이프는 표면 보호, 그래픽, 외부 마킹, 페인트 또는 코팅되지 않은 부분의 스텐실 및 스프레이 마스킹에 사용됩니다. 또한, 선도적인 제조업체는 더 탄력 있고 내열성이 있는 핫멜트 테이프와 수성 테이프를 도입하고 있습니다.
목차
제1장 서문
제2장 조사 범위 및 방법
- 조사 목적
- 이해관계자
- 데이터 소스
- 시장 추정
- 조사 방법
제3장 주요 요약
제4장 소개
제5장 세계의 감압 테이프 시장
- 시장 개요
- 시장 실적
- COVID-19 영향
- 시장 예측
제6장 시장 분석 : 유형별
- 싱글 코트 유형
- 더블 코트 유형
- 점착 전사 유형
제7장 시장 분석 : 기술별
제8장 시장 분석 : 수지 유형별
제9장 시장 분석 : 재료 유형별
제10장 시장 분석 : 용도별
제11장 시장 분석 : 지역별
- 북미
- 아시아 태평양
- 유럽
- 독일
- 프랑스
- 영국
- 이탈리아
- 스페인
- 러시아
- 기타
- 남미
- 중동 및 아프리카
제12장 SWOT 분석
제13장 밸류체인 분석
- 원재료 조달
- 제조
- 마케팅
- 유통
- 수출
- 최종 용도
제14장 Porter's Five Forces 분석
- 개요
- 구매자의 협상력
- 공급기업의 협상력
- 경쟁도
- 신규 참가업체의 위협
- 대체품의 위협
제15장 가격 지표
제16장 경쟁 구도
- 시장 구조
- 주요 기업
- 주요 기업 프로파일
- Advance Tapes International Ltd.
- 3M Company
- American Biltrite Inc.
- CCT Tapes
- HB Fuller Company
- Jonson Tapes Limited
- LINTEC Corporation
- NICHIBAN Co. Ltd.
- Nitto Denko
- Scapa Group
- Tesa SE
LYJ
The global pressure sensitive tapes market size reached US$ 64.0 Billion in 2023. Looking forward, IMARC Group expects the market to reach US$ 100.9 Billion by 2032, exhibiting a growth rate (CAGR) of 5% during 2024-2032.
Pressure sensitive tapes refer to a continuous strip of flexible materials, like cloth, paper, plastic, or metal, that have an adhesive on one or both sides. The adhesive can be a combination of both natural and synthetic materials, such as resins, acrylic, polyacrylates and rubber, that provide uniform thickness. Some products are also reinforced with glass strands or woven or knitted cloth to offer high tensile strength and resistance to cuts and abrasions. These tapes do not require a solvent, water or heat to adhere and can stick to clean and dry surfaces with minimal pressure. Nowadays, pressure sensitive tapes are available in a variety of shapes and sizes with varying degrees of stickiness.
Pressure sensitive tapes are lightweight, cost-effective, and impact and electricity-resistant. Owing to these properties, these tapes are widely used for sealing, labeling, industrial packaging and other general purposes. In the packaging industry, they are used for sealing cardboards and containers. Apart from this, they are utilized in the automotive industry for joining side mirrors, interior parts and LED lights in vehicles. They also help in reducing vibrations and sounds, as well as lowering assembly time. In the aerospace industry, pressure tapes are used for surface protection, graphics and exterior markings, and stencil and spray masking a section that is not to be painted or coated. Moreover, the leading manufacturers are introducing hot melt and water-based tapes that are more resilient and heat-proof.
Key Market Segmentation:
IMARC Group provides an analysis of the key trends in each sub-segment of the global pressure sensitive tapes market report, along with forecasts at the global, regional and country level from 2024-2032. Our report has categorized the market based on type, technology, resin type, material type and application.
Breakup by Type:
Single-Coated Type
Double-Coated Type
Adhesive Transfer Type
Breakup by Technology:
Water Type
Solution Based
Emulsion Based
Solvent Type
Hot-Melt Type
Radiation Type
Breakup by Resin Type:
Acrylic
Rubber
Silicone
Others
Breakup by Material Type:
Foam
Film
Paper
Others
Breakup by Application:
Automotive
Packaging
Electronics
Others
Breakup by Region:
North America
United States
Canada
Asia Pacific
China
Japan
India
South Korea
Australia
Indonesia
Others
Europe
Germany
France
United Kingdom
Italy
Spain
Russia
Others
Latin America
Brazil
Mexico
Others
Middle East and Africa
Competitive Landscape:
The competitive landscape of the industry has also been examined with some of the key players being Advance Tapes International Ltd., 3M Company, American Biltrite Inc., CCT Tapes, H.B. Fuller Company, Jonson Tapes Ltd., LINTEC Corporation, NICHIBAN Co. Ltd., Nitto Denko, Scapa Group, Tesa SE, etc.
Key Questions Answered in This Report:
- How has the global pressure sensitive tapes market performed so far and how will it perform in the coming years?
- What are the key regional markets?
- What has been the impact of COVID-19 on the global pressure sensitive tapes market?
- What is the breakup of the market based on the type?
- What is the breakup of the market based on the technology?
- What is the breakup of the market based on the resin type?
- What is the breakup of the market based on the material type?
- What is the breakup of the market based on the application?
- What are the various stages in the value chain of the industry?
- What are the key driving factors and challenges in the industry?
- What is the structure of the global pressure sensitive tapes market and who are the key players?
- What is the degree of competition in the industry?
Table of Contents
1 Preface
2 Scope and Methodology
- 2.1 Objectives of the Study
- 2.2 Stakeholders
- 2.3 Data Sources
- 2.3.1 Primary Sources
- 2.3.2 Secondary Sources
- 2.4 Market Estimation
- 2.4.1 Bottom-Up Approach
- 2.4.2 Top-Down Approach
- 2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
- 4.1 Overview
- 4.2 Key Industry Trends
5 Global Pressure Sensitive Tapes Market
- 5.1 Market Overview
- 5.2 Market Performance
- 5.3 Impact of COVID-19
- 5.4 Market Forecast
6 Market Breakup by Type
- 6.1 Single-Coated Type
- 6.1.1 Market Trends
- 6.1.2 Market Forecast
- 6.2 Double-Coated Type
- 6.2.1 Market Trends
- 6.2.2 Market Forecast
- 6.3 Adhesive Transfer Type
- 6.3.1 Market Trends
- 6.3.2 Market Forecast
7 Market Breakup by Technology
- 7.1 Water Type
- 7.1.1 Market Trends
- 7.1.2 Major Types
- 7.1.2.1 Solution Based
- 7.1.2.2 Emulsion Based
- 7.1.3 Market Forecast
- 7.2 Solvent Type
- 7.2.1 Market Trends
- 7.2.2 Market Forecast
- 7.3 Hot-Melt Type
- 7.3.1 Market Trends
- 7.3.2 Market Forecast
- 7.4 Radiation Type
- 7.4.1 Market Trends
- 7.4.2 Market Forecast
8 Market Breakup by Resin Type
- 8.1 Acrylic
- 8.1.1 Market Trends
- 8.1.2 Market Forecast
- 8.2 Rubber
- 8.2.1 Market Trends
- 8.2.2 Market Forecast
- 8.3 Silicone
- 8.3.1 Market Trends
- 8.3.2 Market Forecast
- 8.4 Others
- 8.4.1 Market Trends
- 8.4.2 Market Forecast
9 Market Breakup by Material Type
- 9.1 Foam
- 9.1.1 Market Trends
- 9.1.2 Market Forecast
- 9.2 Film
- 9.2.1 Market Trends
- 9.2.2 Market Forecast
- 9.3 Paper
- 9.3.1 Market Trends
- 9.3.2 Market Forecast
- 9.4 Others
- 9.4.1 Market Trends
- 9.4.2 Market Forecast
10 Market Breakup by Application
- 10.1 Automotive
- 10.1.1 Market Trends
- 10.1.2 Market Forecast
- 10.2 Packaging
- 10.2.1 Market Trends
- 10.2.2 Market Forecast
- 10.3 Electronics
- 10.3.1 Market Trends
- 10.3.2 Market Forecast
- 10.4 Others
- 10.4.1 Market Trends
- 10.4.2 Market Forecast
11 Market Breakup by Region
- 11.1 North America
- 11.1.1 United States
- 11.1.1.1 Market Trends
- 11.1.1.2 Market Forecast
- 11.1.2 Canada
- 11.1.2.1 Market Trends
- 11.1.2.2 Market Forecast
- 11.2 Asia Pacific
- 11.2.1 China
- 11.2.1.1 Market Trends
- 11.2.1.2 Market Forecast
- 11.2.2 Japan
- 11.2.2.1 Market Trends
- 11.2.2.2 Market Forecast
- 11.2.3 India
- 11.2.3.1 Market Trends
- 11.2.3.2 Market Forecast
- 11.2.4 South Korea
- 11.2.4.1 Market Trends
- 11.2.4.2 Market Forecast
- 11.2.5 Australia
- 11.2.5.1 Market Trends
- 11.2.5.2 Market Forecast
- 11.2.6 Indonesia
- 11.2.6.1 Market Trends
- 11.2.6.2 Market Forecast
- 11.2.7 Others
- 11.2.7.1 Market Trends
- 11.2.7.2 Market Forecast
- 11.3 Europe
- 11.3.1 Germany
- 11.3.1.1 Market Trends
- 11.3.1.2 Market Forecast
- 11.3.2 France
- 11.3.2.1 Market Trends
- 11.3.2.2 Market Forecast
- 11.3.3 United Kingdom
- 11.3.3.1 Market Trends
- 11.3.3.2 Market Forecast
- 11.3.4 Italy
- 11.3.4.1 Market Trends
- 11.3.4.2 Market Forecast
- 11.3.5 Spain
- 11.3.5.1 Market Trends
- 11.3.5.2 Market Forecast
- 11.3.6 Russia
- 11.3.6.1 Market Trends
- 11.3.6.2 Market Forecast
- 11.3.7 Others
- 11.3.7.1 Market Trends
- 11.3.7.2 Market Forecast
- 11.4 Latin America
- 11.4.1 Brazil
- 11.4.1.1 Market Trends
- 11.4.1.2 Market Forecast
- 11.4.2 Mexico
- 11.4.2.1 Market Trends
- 11.4.2.2 Market Forecast
- 11.4.3 Others
- 11.4.3.1 Market Trends
- 11.4.3.2 Market Forecast
- 11.5 Middle East and Africa
- 11.5.1 Market Trends
- 11.5.2 Market Breakup by Country
- 11.5.3 Market Forecast
12 SWOT Analysis
- 12.1 Overview
- 12.2 Strengths
- 12.3 Weaknesses
- 12.4 Opportunities
- 12.5 Threats
13 Value Chain Analysis
- 13.1 Raw Material Procurement
- 13.2 Manufacturing
- 13.3 Marketing
- 13.4 Distribution
- 13.5 Export
- 13.6 End-Use
14 Porters Five Forces Analysis
- 14.1 Overview
- 14.2 Bargaining Power of Buyers
- 14.3 Bargaining Power of Suppliers
- 14.4 Degree of Competition
- 14.5 Threat of New Entrants
- 14.6 Threat of Substitutes
15 Price Indicators
16 Competitive Landscape
- 16.1 Market Structure
- 16.2 Key Players
- 16.3 Profiles of Key Players
- 16.3.1 Advance Tapes International Ltd.
- 16.3.1.1 Company Overview
- 16.3.1.2 Product Portfolio
- 16.3.1.3 Financials
- 16.3.2 3M Company
- 16.3.2.1 Company Overview
- 16.3.2.2 Product Portfolio
- 16.3.2.3 Financials
- 16.3.2.4 SWOT Analysis
- 16.3.3 American Biltrite Inc.
- 16.3.3.1 Company Overview
- 16.3.3.2 Product Portfolio
- 16.3.3.3 Financials
- 16.3.4 CCT Tapes
- 16.3.4.1 Company Overview
- 16.3.4.2 Product Portfolio
- 16.3.5 H.B. Fuller Company
- 16.3.5.1 Company Overview
- 16.3.5.2 Product Portfolio
- 16.3.5.3 Financials
- 16.3.5.4 SWOT Analysis
- 16.3.6 Jonson Tapes Limited
- 16.3.6.1 Company Overview
- 16.3.6.2 Product Portfolio
- 16.3.7 LINTEC Corporation
- 16.3.7.1 Company Overview
- 16.3.7.2 Product Portfolio
- 16.3.7.3 Financials
- 16.3.8 NICHIBAN Co. Ltd.
- 16.3.8.1 Company Overview
- 16.3.8.2 Product Portfolio
- 16.3.8.3 Financials
- 16.3.9 Nitto Denko
- 16.3.9.1 Company Overview
- 16.3.9.2 Product Portfolio
- 16.3.9.3 Financials
- 16.3.9.4 SWOT Analysis
- 16.3.10 Scapa Group
- 16.3.10.1 Company Overview
- 16.3.10.2 Product Portfolio
- 16.3.10.3 Financials
- 16.3.10.4 SWOT Analysis
- 16.3.11 Tesa SE
- 16.3.11.1 Company Overview
- 16.3.11.2 Product Portfolio
- 16.3.11.3 Financials
