상용차용 런플랫 타이어 인서트 시장
Commercial Vehicle Run-flat Tire Inserts
상품코드 : 1655509
리서치사 : Market Glass, Inc. (Formerly Global Industry Analysts, Inc.)
발행일 : 2025년 02월
페이지 정보 : 영문 244 Pages
 라이선스 & 가격 (부가세 별도)
US $ 5,850 ₩ 8,679,000
PDF & Excel (Single User License) help
PDF & Excel 보고서를 1명만 이용할 수 있는 라이선스입니다. 파일 내 텍스트의 복사 및 붙여넣기는 가능하지만, 표/그래프 등은 복사할 수 없습니다. 인쇄는 1회 가능하며, 인쇄물의 이용범위는 파일 이용범위와 동일합니다.
US $ 17,550 ₩ 26,038,000
PDF & Excel (Global License to Company and its Fully-owned Subsidiaries) help
PDF & Excel 보고서를 동일 기업 및 100% 자회사의 모든 분이 이용하실 수 있는 라이선스입니다. 인쇄는 1인당 1회 가능하며, 인쇄물의 이용범위는 파일 이용범위와 동일합니다.


한글목차

세계의 상용차용 런플랫 타이어 인서트 시장은 2030년까지 3억 5,080만 달러에 달할 전망

2024년에 3억 2,750만 달러로 추정되는 세계의 상용차용 런플랫 타이어 인서트 시장은 2024-2030년에 CAGR 1.1%로 성장하며, 2030년에는 3억 5,080만 달러에 달할 것으로 예측됩니다. 이 리포트에서 분석한 부문의 하나인 운송·물류 애플리케이션은 CAGR 1.3%를 기록하며, 분석 기간 종료시에는 7,700만 달러에 달할 것으로 예측됩니다. 군·방위 애플리케이션 분야의 성장률은 분석 기간 중 CAGR 1.7%로 추정됩니다.

미국 시장은 8,710만 달러로 추정·중국은 CAGR 2.4%로 성장 예측

미국의 상용차용 런플랫 타이어 인서트 시장은 2024년에 8,710만 달러로 추정됩니다. 세계 2위의 경제대국인 중국은 분석 기간인 2024-2030년에 CAGR 2.4%로 추이하며, 2030년에는 예측 시장 규모 6,740만 달러에 달할 것으로 예측됩니다. 기타 주목해야 할 지역별 시장으로는 일본과 캐나다가 있으며, 분석 기간 중 CAGR은 각각 0.1%와 0.9%로 예측됩니다. 유럽에서는 독일이 CAGR 약 0.1%로 성장할 것으로 예측됩니다.

세계의 상용차용 런플랫 타이어 인서트 시장 - 주요 동향과 촉진요인 정리

상용차에서 런플랫 타이어 인서트가 인기를 끌고 있는 이유는 무엇인가?

런플랫 타이어 인서트는 안전성 향상과 다운타임 감소에 대한 수요로 인해 상용차 부문에서 인기가 높아지고 있습니다. 런플랫 타이어 인서트는 타이어 펑크나 파열 후에도 차량이 계속 주행할 수 있도록 해줍니다. 차량 운영자는 비용이 많이 드는 지연이나 도로에서의 긴급 상황을 피할 수 있으며, 효율성을 높이고 운영 비용을 절감할 수 있습니다. 또한 런플랫 인서트는 즉각적인 로드사이드 어시스트에 대한 의존도를 낮춰 원격지나 위험도가 높은 지역에서 운행하는 차량에 특히 유용하게 사용할 수 있습니다.

기술의 발전은 어떻게 런플랫 타이어 인서트를 형성하고 있는가?

기술 혁신은 런플랫 타이어 인서트의 기능과 내구성을 크게 향상시켰습니다. 고강도 폴리머 및 강화 고무 복합재료와 같은 첨단 재료의 도입은 인서트의 수명을 연장하고내 하중 성능을 향상 시켰습니다. 또한 타이어 관리 시스템에 통합된 새로운 센서 기술을 통해 타이어의 공기압과 성능을 실시간으로 모니터링할 수 있게 되었습니다. 이 기능은 예방적 유지보수 노력을 강화하여 차량 운영사가 차량 가동 중단이 발생하기 전에 잠재적인 문제를 해결할 수 있도록 돕습니다. 이러한 발전은 상용차 운전자가 운전자의 안전을 보장하면서 효율성을 유지할 수 있도록 돕고 있습니다.

런플랫 타이어 인서트 수요를 주도하는 분야는?

물류, 응급 서비스 및 방위 분야가 런플랫 타이어 인서트에 대한 수요를 주도하고 있습니다. 납기가 중요한 물류 분야에서는 런플랫 타이어 인서트가 타이어 고장으로 인한 비용 발생을 방지하는 데 도움을 주고 있습니다. 구급차나 경찰 차량과 같은 긴급 서비스는 타이어 사고 발생 시에도 운행을 계속할 수 있으므로 중단 없이 목적지에 도착할 수 있다는 이점이 있습니다. 국방 분야에서 런플랫 타이어 인서트는 타이어 손상이 빈번하게 발생할 수 있는 험한 지형을 통과하는 군용 차량에 필수적입니다. 또한 전 세계에서 전기 상용차가 증가함에 따라 차량의 안전과 성능을 향상시키는 타이어 솔루션에 대한 수요가 증가하고 있습니다.

상용차 런플랫 타이어 인서트 시장의 주요 성장 촉진요인은 무엇인가?

상용차 런플랫 타이어 인서트 시장의 성장은 물류 산업의 확대, 상업용 운송의 안전 규제 강화, 전기 상용차의 채택 증가 등 여러 가지 요인에 기인합니다. 특히 시간이 중요한 산업에서 중단 없는 운영이 요구되면서 런플랫 인서트의 채택이 가속화되고 있습니다. 재료의 내구성과 센서 통합의 기술 발전은 상용차에 보다 안정적이고 비용 효율적인 솔루션을 제공하므로 시장을 주도하고 있습니다. 도로 상황이 타이어 손상의 원인이 되는 신흥 시장의 성장은 런플랫 타이어 인서트에 대한 수요를 더욱 증가시키고 있습니다.

부문

용도(운송-물류, 군-국방, 농업, 제조, 건설, 기타 용도)

조사 대상 기업의 예(총 42건)

목차

제1장 조사 방법

제2장 개요

제3장 시장 분석

제4장 경쟁

KSA
영문 목차

영문목차

Global Commercial Vehicle Run-flat Tire Inserts Market to Reach US$350.8 Million by 2030

The global market for Commercial Vehicle Run-flat Tire Inserts estimated at US$327.5 Million in the year 2024, is expected to reach US$350.8 Million by 2030, growing at a CAGR of 1.1% over the analysis period 2024-2030. Transportation & Logistics Application, one of the segments analyzed in the report, is expected to record a 1.3% CAGR and reach US$77.0 Million by the end of the analysis period. Growth in the Military & Defense Application segment is estimated at 1.7% CAGR over the analysis period.

The U.S. Market is Estimated at US$87.1 Million While China is Forecast to Grow at 2.4% CAGR

The Commercial Vehicle Run-flat Tire Inserts market in the U.S. is estimated at US$87.1 Million in the year 2024. China, the world's second largest economy, is forecast to reach a projected market size of US$67.4 Million by the year 2030 trailing a CAGR of 2.4% over the analysis period 2024-2030. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at a CAGR of 0.1% and 0.9% respectively over the analysis period. Within Europe, Germany is forecast to grow at approximately 0.1% CAGR.

Global Commercial Vehicle Run-flat Tire Inserts Market – Key Trends & Drivers Summarized

Why Are Run-Flat Tire Inserts Gaining Popularity in Commercial Vehicles?

Run-flat tire inserts are gaining increasing traction in the commercial vehicle sector due to the demand for enhanced safety and reduced downtime. These inserts allow vehicles to continue operating even after a tire puncture or blowout, which is crucial in logistics, delivery, and emergency services where operational continuity is vital. Fleet operators benefit from avoiding costly delays and roadside emergencies, leading to improved efficiency and lower operational costs. The adoption of run-flat inserts also reduces reliance on immediate roadside assistance, making it particularly valuable for vehicles operating in remote or high-risk areas.

How Are Technological Advancements Shaping Run-Flat Tire Inserts?

Technological innovations are significantly enhancing the functionality and durability of run-flat tire inserts. The introduction of advanced materials such as high-strength polymers and reinforced rubber composites is extending the lifespan of inserts and improving load-bearing capabilities. Additionally, new sensor technologies integrated into tire management systems now enable real-time monitoring of tire pressure and performance. This capability enhances preventive maintenance efforts, allowing fleet operators to address potential issues before they cause vehicle downtime. These advancements are helping commercial vehicle operators maintain efficiency while ensuring driver safety.

Which Sectors Are Driving the Demand for Run-Flat Tire Inserts?

The logistics, emergency services, and defense sectors are leading the demand for run-flat tire inserts. In the logistics sector, where delivery timelines are critical, run-flat tire inserts help avoid costly delays caused by tire failure. Emergency services such as ambulances and police vehicles benefit from the ability to continue operating during tire incidents, ensuring they reach destinations without interruption. In the defense sector, run-flat tire inserts are essential for military vehicles navigating difficult terrains, where tire damage can occur frequently. Additionally, as the global fleet of electric commercial vehicles grows, there is increased demand for tire solutions that enhance vehicle safety and performance.

What Are the Key Growth Drivers of the Commercial Vehicle Run-flat Tire Inserts Market?

The growth in the commercial vehicle run-flat tire inserts market is driven by several factors, including the expansion of the logistics industry, increasing safety regulations in commercial transportation, and the rising adoption of electric commercial vehicles. The demand for uninterrupted operations, especially in time-sensitive industries, is accelerating the adoption of run-flat inserts. Technological advancements in material durability and sensor integration are also driving the market, as they provide commercial fleets with more reliable and cost-effective solutions. The growth of emerging markets, where road conditions often contribute to tire damage, is further expanding the demand for run-flat tire inserts.

SCOPE OF STUDY:

The report analyzes the Commercial Vehicle Run-flat Tire Inserts market in terms of units by the following Segments, and Geographic Regions/Countries:

Segments:

Application (Transportation & Logistics, Military & Defense, Agricultural, Manufacturing, Construction, Other Applications)

Geographic Regions/Countries:

World; United States; Canada; Japan; China; Europe (France; Germany; Italy; United Kingdom; Spain; Russia; and Rest of Europe); Asia-Pacific (Australia; India; South Korea; and Rest of Asia-Pacific); Latin America (Argentina; Brazil; Mexico; and Rest of Latin America); Middle East (Iran; Israel; Saudi Arabia; United Arab Emirates; and Rest of Middle East); and Africa.

Select Competitors (Total 42 Featured) -

TABLE OF CONTENTS

I. METHODOLOGY

II. EXECUTIVE SUMMARY

III. MARKET ANALYSIS

IV. COMPETITION

(주)글로벌인포메이션 02-2025-2992 kr-info@giikorea.co.kr
ⓒ Copyright Global Information, Inc. All rights reserved.
PC버전 보기